The humidity buffer capacity of clay–sand plaster filled with phytomass from treatment wetlands

The aim of our study was to measure the amount of moisture absorption and desorption in clay–sand plaster mixed with “fibre-wool” from Typha spadixes and chips of Typha and Phragmites. Common cattail (Typha latifolia) and common reed (Phragmites australis) are the most common plants in constructed and semi-natural wetlands for wastewater treatment, as they are highly valued in ecologically oriented construction. The cattail and reed for the experiment were harvested in a wastewater treatment subsurface flow semi-natural wetland and in two free water surface constructed wetlands which showed reliable aboveground phytomass production over a 5 years period (for Typha, 0.37–1.76 kg DW m⁻² in autumn and 0.33–1.38 kg DW m⁻², and for Phragmites, 0.61–1.32 and 0.61–1.02 kg DW m⁻², respectively). The quantity of moisture absorption and desorption was measured in a climatic chamber where the humidity of ambient air was suddenly raised from 50% to 80% (absorption) and reduced from 80% to 50% (desorption). Over 12 h, all of the samples released the same amount of water as they absorbed. The clay–sand plaster samples absorbed slower than they desorbed, whereas the gypsum wallboard required significantly more time for desorption. Added phytomass gave positive effects by reducing the weight of the clay–sand plaster, accelerating and increasing moisture absorption.     

Inter-organizational information systems adoption – a configuration analysis approach

In this article we propose a new complementary approach to investigate Inter-Organizational Information Systems (IOIS) adoption called configuration analysis. We motivate the need for a new approach by the common observation that the structure and the strategy of an IOIS are interdependent and that the IOIS adoptions consequently cluster orderly. For example, an IOIS setup with a powerful customer as a hub and many suppliers as spokes frequently surfaces across diffusion studies. Yet, this fact has not been integrated into existing analyses, and its implications have not been fully developed. We propose that IOIS scholars need to look beyond the single adopting organization in IOIS adoption studies and in contrast consider adoption units what we call an adoption configuration. Each such configuration can be further characterized along the following dimensions: (1) vision, (2) key functionality, (3) mode of interaction, (4) structure and (5) mode of appropriation. In addition, these dimensions do not co-vary independently. For example, a particular organizing vision assumes a specific inter-organizational structure. A typology of IOIS configurations for adoption analysis is laid out consisting of dyadic, hub and spoke, industry and community configurations. Specific forms or adoption analysis are suggested for each type of configuration. Overall, configuration analysis redirects IOIS adoption studies both at the theoretical and the methodological level, and a corresponding research agenda is sketched.     

Improvement of mechanical properties of rubber compounds using waste rubber/virgin rubber

Ground rubber powder (GRP) and devulcanized rubber waste obtained using the process of continuous shear flow reaction were used as both fillers and a part of rubber in virgin natural rubber (NR). The cure characteristics, swelling behavior, cross‐link density, mechanical properties, and morphology were studied in our laboratory. The GRP and devulcanized rubber, which were generated from passenger car and light truck tires, showed applicable mechanical properties in new rubber compounds, and the compounds that contained devulcanized rubber showed better properties than those with GRP. In particular, devulcanized rubber as a part of rubber obtained through a cross‐link reaction exhibited excellent mechanical properties, with a strong potential for future applications. POLYM. ENG. SCI., 45:1239–1246, 2005. © 2005 Society of Plastics Engineers     

ANN modeling applied to NO x reduction with octane in a new microreactor

A silver/alumina catalyst was tested for its NO _x reduction activity during oxygen-rich conditions and during variation in the input parameters (nitric oxide, octane and oxygen). The experimental data using the microreactor was investigated by means of artificial neural networks (ANN).     

Atomic force microscopy: influence of air drying and fixation on the morphology and viscoelasticity of cultured cells

The influence of fixation, air-drying and liquid-imaging on the morphology as well as on the viscoelasticity of malignant mesothelioma cells was studied by atomic force microscopy. In this study, dehydrated cells were more easily scanned and offered faster data recording than hydrated cells. However, the influence of fixation strength was more noticeable. Strong fixation induced flattening of the cytoplasm and loss of nuclear structure, resulting in a clearly visible cytoskeleton which could be easily seen as fibres orientated in the direction of the cell growth. By contrast, the morphology of hydrated cells was influenced to a lesser degree on fixation and showed an overall 'rounding' of the surface with vague, ill-defined structures. Nuclear areas of these samples were difficult to image.
Viscoelasticity measurements also exhibited large differences. Dehydrated cells were much harder and showed a uniform indentation profile over the whole cell that was independent of fixation. Indentation on hydrated cells was large and depended on the height of the measuring spot, the submembranous structure and, to a lesser extent, on fixation. To calculate an overall 'cellular' viscoelasticity, different methods were tested on these samples. Indentations of multiple, randomly chosen points, covering the whole cell, were measured and averaged to yield a mean indentation score. We avoided the thin and shadowed areas since it was shown that these regions were less suited for measuring. Using this design, large viscoelasticity differences were found, on which the influence of the external parameters could be shown. In another set-up, layered imaging was tried. However, long data acquisition times caused cellular activation and rearrangement, making this scanning mode unsatisfactory.     

Rifle-balancing in precision shooting: behavioral aspects and psychophysiological implication

In recent years, following the identification and molecular cloning of many key adhesion molecules, the three-dimensional structures of some of the domains that mediate adhesive interactions have been determined. This review discusses how these studies have helped explain the unique functional roles of the different families of adhesion molecules.     

The Minimal Structure and Motion Problems with Missing Data for 1D Retina Vision

In this paper we investigate the structure and motion problem for calibrated one-dimensional projections of a two-dimensional environment. The theory of one-dimensional cameras are useful in several areas, e.g. within robotics, autonomous guided vehicles, projection of lines in ordinary vision and vision of vehicles undergoing so called planar motion. In a previous paper the structure and motion problem for all cases with non-missing data was classified and solved. Our aim is here to classify all structure and motion problems, even those with missing data, and to solve them. In the classification we introduce the notion of a prime problem. A prime problem is a minimal problem that does not contain a minimal problem as a sub-problem. We further show that there are infinitely many such prime problems. We give solutions to four prime problems, and using the duality of Carlsson these can be extended to solutions of seven prime problems. Finally we give some experimental results based on synthetic data.     

Can software risk management improve system development: an exploratory study

Software risk management can be defined as an attempt to formalise risk oriented correlates of development success into a readily applicable set of principles and practices. Earlier research suggests that it can reduce the likelihood of a system failure. Using a survey instrument we investigate this claim further. The investigation addresses the following questions: (1) which characteristics of risk management practices; and (2) which other environmental and process factors (such as development methods, manager's experience) relate to improved performance in managing software risks? Our findings support in general the claim that the use of risk management methods improves system development performance. Yet, little support was found for the claim that specific risk management methods are instrumental in attacking specific software risks. Overall, risks are better managed with combined measures of having experienced project managers, selecting a correct project size, and investing in and obtaining experience in risk management deliberations.