High-frequency analysis of the Ellipticus antenna

Efficient numerical solution techniques have been developed and used to examine the electromagnetic fields that can be developed in the working volume of the CW Ellipticus antenna operated at frequencies from 100 kHz to 1 GHz. An exponentially tapered transition section is designed to obtain the desired illumination pattern in the working volume. The input transition section is needed for impedance matching and to drive efficiently the Ellipticus antenna. A parametric study is performed to ascertain the performance of the Ellipticus antenna for frequencies up to 1 GHz     

„Patriot“

Ohne Zusammenfassung     

OC-48、OC-192芯片和系统设计师面临挑战

当今，从事OC-48、OC-192技术的设计师在设计基于因特网协议(IP协议)的下一代系统时，因系统含有诸如ASIC、网络处理器(NP)、高速跟踪器等元件，以及分组SONET物理层(PoS-PHY)接口规范等的演变，而一直面临挑战。抖动和扭斜失真等现象的存在给诸如系统分组接口第4层(SPI-4)和通用交换接口(CSIX)等总线结构本已拥挤的时序容限，以及四元数据率静态RAM传送表访问时间带来极大混乱。再加上诸如低压差分信号(LVDS)、高速收发逻辑和短线串行终端逻辑等超低电压峰-峰信号技术的引入，使数据出错的可能性变得异常之高。而利用仿真技…     

Meßtechnik zur Charakterisierung von Gas/Flüssigkeits-Reaktoren

Measuring techniques for characterizing gas/liquid reactors . The article considers measuring techniques for the characterization of the phases in gas/liquid reactors. These include the velocity profile and turbulence in the continuous phase as well as holdup, size, and velocity of the dispersed phase. Also, methods for the determination of the specific interfacial area and the volumetric mass transfer coefficients are discussed. Measuring methods have made enormous advances in recent years. In spite of this, there is a lack of reliable methods, especially for use during reactions without disturbing the state of the reactor. It is suspected that probe technique will gradually fall into disuse and more and more attention will be focussed on contractless methods. This calls for further development of ultrasonic methods and methods relying on emission of light.     

The effects of lead exposure on learning in a multiple repeated acquisition and performance schedule

This study sought to determine the selectivity of Pb-induced changes in learning, as distinct from non-specific or performance effects, and to explore the nature of the underlying error patterns contributing to any learning deficits. To accomplish this, rats were chronically exposed to 0, 50, or 250 ppm Pb acetate in drinking water from weaning and trained on a multiple repeated acquisition (RA) and performance (P) schedule beginning at 55 days of age. The RA component required the rat to learn a new 3-member sequence of responses during each experimental session (Center Right Left, RLC, CLR, RCL, and LRC), while the correct sequence of responses for the P component was constant across sessions (LCR). Significant decrements in accuracy on the RA component but not on the P component were found in Pb-exposed groups compared to control, effects that could not be attributed to differential rates of responding. Analyses of error patterns revealed that the effects of Pb exposure on RA accuracy levels derived from two sources. The first consisted of a perseveration of P-like sequence responding (LCR) even during the RA component. Secondly, Pb exposure increased perseverative responding on a single lever, even though the schedule itself never directly reinforced such repetitive responding. The increase in frequency of these two types of perseverative behavior was incompatible with acquisition of non P-like sequences during the RA component. Adding a 5 sec tone to the light stimuli signalling the transition between RA and P components of the multiple schedule failed to attenuate these effects of Pb, suggesting that deficits in stimulus control were not the sole behavioral mechanism of these impairments. Examination of individual data revealed the presence of both 'learners' and 'non-learners' in each group, with the prevalence of the latter being suggestively higher in Pb-exposed groups than in controls. These findings may be relevant to the classroom setting, where periods requiring learning may frequently be interspersed with periods of performance of learned skills.     

Motion of a solid sphere in a general flow near a plane boundary at zero Reynolds number

It is demonstrated how the hydrodynamic force and moment of force acting on a solid sphere may be calculated when it is placed at rest at an arbitrary position in a two dimensional flow at zero Reynolds number in which the region of flow is bounded by either an undeformable planar free surface or by a plane solid wall. The results so obtained are used to calculate the motion of a freely moving solid sphere in an asymmetric vortex in the presence of an underformable free surface. It is seen that the sphere, depending on the direction of the undisturbed flow, will either spiral into or out of the vortex. This implies that when a dilute suspension of such spherical particles undergoes such a vortex motion in the presence of the free surface, the vortex will either fill up with particles from the surrounding flow or become devoid of particles.Deceased, July 31, 1995     

The domain composition method applied to Poisson's equation in two dimensions

Domain composition, a recently described method for formulating continuum field problems, removes certain restrictions on the construction of finite element models such that it is possible to solve a finite element problem without using a global compatible mesh. The domain composition method couples or otherwise constrains meshes in local regions to obtain a solution equivalent to that produced by conventional finite element methods. In particular, the domain composition method enables finite element models to be formulated with overlapping elements. Several advantages come from this, including an ability to automatically generate a finite element model from a solid geometric model, an ability to use a variety of element types in a single finite element model and an ability to exactly match element boundaries to the local geometry. This paper shows in detail a finite element formulation of Poisson's equation using domain composition and presents certain key algorithms that incorporate the domain composition method into well-established finite element procedures.