Ligand-Installed Nanocarriers toward Precision Therapy

Development of drug-delivery systems that selectively target neoplastic cells has been a major goal of nanomedicine. One major strategy for achieving this milestone is to install ligands on the surface of nanocarriers to enhance delivery to target tissues, as well as to enhance internalization of nanocarriers by target cells, which improves accuracy, efficacy, and ultimately enhances patient outcomes. Herein, recent advances regarding the development of ligand-installed nanocarriers are introduced and the effect of their design on biological performance is discussed. Besides academic achievements, progress on ligand-installed nanocarriers in clinical trials is presented, along with the challenges faced by these formulations. Lastly, the future perspectives of ligand-installed nanocarriers are discussed, with particular emphasis on their potential for emerging precision therapies.     

Geosynthetic-sheet pile reinforced foundation for mitigation of earthquake and tsunami induced damage of breakwater

Earthquake and tsunami impose great threats on the stability of a breakwater. Foundation of the breakwater is weakened by these forces, and it may result in collapse of the breakwater. Lateral flow of seabed soils take place beneath the breakwater, and excess pore water pressure is generated in the foundation by an earthquake that precedes tsunami. These factors may lead to excessive settlement and horizontal displacement of the breakwater. Tsunami introduces additional instability to the deformed breakwater. Due to water level difference between seaside and harborside of the breakwater during a tsunami, seepage occurs through its foundation, and it may cause pipping of seabed soils. Tsunami induced scouring of mound is also a big problem for the stability of the breakwater foundation. Finally, these result in failure of the breakwater foundation. Due to failure of its foundation, the breakwater may collapse and cannot block the tsunami. It results in entering of the tsunami in coastal areas. In order to make a breakwater resilient against earthquake and tsunami induced damage, reinforcing countermeasures were developed for foundation of a breakwater. Geogrid, gabions and sheet piles were used for reinforcing a foundation model. The effectiveness of the model is evaluated through physical modeling for mitigating the earthquake and tsunami induced damage. Shaking table tests were performed to determine the effectiveness of the reinforced model under different earthquake loadings. Tsunami overflow test was conducted on the same deformed model in order to see the effects of tsunami on the model. Comparisons were made between the unreinforced and reinforced foundations, and it was observed during the tests that the reinforced foundation performed well in reducing the damage of the breakwater brought by the earthquake and tsunami. Overall, this study is useful for practice engineering, and the reinforced foundation model can be adopted for designing a breakwater foundation to reduce damage triggered by an earthquake and tsunami in the future.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Phragmites australis: a novel biosorbent for the removal of heavy metals from aqueous solution

Reed (Phragmites australis), a commonly used macrophyte in the wetlands constructed for water purification, was investigated as a new biosorbent for the removal of Cu(2+), Cd(2+), Ni(2+), Pb(2+) and Zn(2+) from aqueous solution. The metal adsorption capacity of reed biomass was improved significantly by water-wash, base- and acid-treatment. The maximum sorption of NaOH-pretreated reed biomass was observed near neutral pH for Cu(2+), Cd(2+), Ni(2+) and Zn(2+), while that for Pb(2+) was from an acidic range of pH 4.0 or higher. The maximum metal adsorption capacity on a molar basis assumed by Langmuir model was in the order of Cu(2+)>Ni(2+)>Cd(2+)>Zn(2+)>Pb(2+). Reed biosorbent showed a very high adsorption affinity value, which helps predict its high ability to adsorb heavy metals at low concentration. Desorption of heavy metals and regeneration of the biosorbent was attained simultaneously by acid elution. Even after three cycles of adsorption-elution, the adsorption capacity was regained completely and the desorption efficiency of metal was maintained at around 90%.     

Compression molding and melt‐spinning of the blends of poly(lactic acid) and poly(butylene succinate‐co‐adipate)

Poly(lactic acid) (PLA) is a biobased polymer made from biomass having high mechanical properties for engineering materials applications. However, PLA has certain limited properties such as its brittleness and low heat distortion temperature. Thus, the aim of this study is to improve toughness of PLA by blending with poly(butylene succinate‐co‐adipate) (PBSA), the biodegradable polymer having high toughness. Polymer blends of PLA and PBSA were prepared using a twin screw extruder. The melt rheology and the thermal property of the blends were examined. Further the blends were fabricated into compression molded parts and melt‐spun fiber and were subjected to tensile and impact tests. When the PBSA content was low, PBSA phase was finely dispersed in the PLA matrix. On the other hand, when the PBSA content was high, this minor phase dispersed as a large droplet. Mechanical properties of the compression molded parts were affected by the dispersion state of PBSA minor component in PLA matrix. Impact strength of the compression molded parts was also improved by the addition of soft PBSA. The improvement was pronounced when the PBSA phase was finely dispersed in PLA matrix. However, the mechanical property of the blend fibers was affected by the postdrawing condition as well as the PBSA content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41856.     

Thermal conductivity and mechanical properties of pitch-based carbon fibre reinforced aluminium composites fabricated by squeeze casting

Pure aluminium and high-silicon aluminium alloy were reinforced with the discontinuous pitch-based carbon fibres by squeeze casting, then the thermal conductivity and the mechanical properties of the composites were investigated. Optical microscopy revealed that the fibres were in a random planar arrangement, and the transmission electron microscopy revealed that there is no interfacial reaction between the matrices and the fibres. The random planar arrangement of the fibres leads to the anisotropy of the composite. The fibre-reinforcement increased the thermal conductivity in the parallel direction for both pure aluminium and its alloy matrices, while the thermal conductivity decreased in the vertical direction. The increase in the elastic modulus by the reinforcement was not observed for both matrices. The proof stress of the pure aluminium increased by the reinforcement especially in the parallel direction, while that of the high-silicon alloy decreased by the reinforcement.     

Preparation of Alumina Fiber-Reinforced Aluminum by Squeeze Casting and Their Machinability

Alumina fiber-reinforced aluminum alloy composites were prepared by squeeze casting, and the effect of the reinforcement on the machinability of the alloy was investigated. Two kinds of short alumina fibers, which have the same fiber size but different hardness, were used. Preform in which the fibers were in a random arrangement was formed with SiO₂ binder, and then was infiltrated with the alloy melt to prepare the composite. The fiber–matrix interfacial bond via the binder is sufficient and no reaction product was detected. The cutting force of the alloy was reduced by the fiber-reinforcement. The lower the hardness of the fiber in the composite, the lower the cutting force of the composite. The roughness of the machined surface was drastically decreased by the reinforcement. Observation of the chip formed on the machined surface indicated that the fiber suppressed the formation of the built-up-edge, and this fact would lead to the reduction in the surface roughness by the reinforcement. The chips were shortened by the reinforcement. The difference in hardness of the alumina fiber hardly affected the roughness and the chip morphology. The hardness of the fiber has a strong effect to decrease the tool life.     

Variable stage-independent double sampling plan with screening for acceptance quality loss limit inspection scheme

The quality loss suggested by Taguchi has been recognised as a new quality evaluation based on variable property instead of the quality evaluation based on traditional attribute property such as the proportion of nonconforming items. Some variable sampling inspection plans in order to assure the quality have been considered. As one of those sampling inspection plans, the single sampling plan with screening (SSPS) has been constructed for acceptance quality loss limit inspection scheme. Further, the repetitive group sampling plan with screening (RGSPS) has been developed for reducing the average total inspection (ATI). Although ATI by RGSPS has successfully been reduced in comparison with ATI by SSPS, RGSPS may sometimes increase the average sampling frequency (ASF) in return for reducing ATI. In this study, the stage-independent double sampling plan with screening (SIDSPS) based on the concept of the acceptance quality loss limit inspection scheme is proposed under the consideration of the trade-off between ATI and ASF. Through some numerical comparisons about ATI and ASF in SSPS, RGSPS, and SIDSPS, the usefulness of SIDSPS proposed in this study is confirmed.