Fabrication and properties of pressure-sintered reaction-bonded Si3N4 ceramics with addition of Eu2O3–MgO–Y2O3

Dense pressure-sintered reaction-bonded Si₃N₄ (PSRBSN) ceramics were obtained by a hot-press sintering method. Precursor Si powders were prepared with Eu₂O₃–MgO–Y₂O₃ sintering additive. The addition of Eu₂O₃–MgO–Y₂O₃ was shown to promote full nitridation of the Si powder. The nitrided Si₃N₄ particles had an equiaxial morphology, without whisker formation, after the Si powders doped with Eu₂O₃–MgO–Y₂O₃ were nitrided at 1400 °C for 2 h. After hot pressing, the relative density, Vickers hardness, flexural strength, and fracture toughness of the PSRBSN ceramics, with 5 wt% Eu₂O₃ doping, were 98.3 ± 0.2%, 17.8 ± 0.8 GPa, 697.0 ± 67.0 MPa, and 7.3 ± 0.3 MPa m^1/2, respectively. The thermal conductivity was 73.6 ± 0.2 W m^?1 K^?1, significantly higher than the counterpart without Eu₂O₃ doping, or with ZrO₂ doping by conventional methods.     

Non‐geostationary satellite orbit communications satellite constellations history

This special issue of the journal on ‘constellations’ comes at a critical time in their development as a second wave of such non‐geostationary satellite orbit (NGSO) systems is being planned and deployed. These mega‐constellations as they have become known are, with a few exceptions, very much larger than those in the first wave and are focused on broadband and 5G applications rather than speech and narrow band data as those deployed in the first wave during the 1990s. However, as we explain in this editorial, there are many similarities in the design and business plans to the first wave and, perhaps, many similar lessons to be learned.     

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

The joining of liquid-phase sintered SiC (LPS-SiC) ceramics was conducted using spark plasma sintering (SPS), through solid state diffusion bonding, with Ti-metal foil as a joining interlayer. Samples were joined at 1400 °C, under applied pressures of either 10 or 30 MPa, and with different atmospheres (argon, Ar, vs. vacuum). It was demonstrated that the shear strength of the joints increased with an increase in the applied joining pressure. The joining atmosphere also affected on both the microstructure and shear strength of the SiC joints. The composition and microstructure of the interlayer were examined to understand the mechanism. As a result, a SiC-SiC joining with a good mechanical performance could be achieved under an Ar environment, which in turn could provide a cost-effective approach and greatly widen the applications of SiC ceramic components with complex shape.     

Insights into the Interaction of LVV-Hemorphin-7 with Angiotensin II Type 1 Receptor

Hemorphins are known for their role in the control of blood pressure. Recently, we revealed the positive modulation of the angiotensin II (AngII) type 1 receptor (AT1R) by LVV-hemorphin-7 (LVV-H7) in human embryonic kidney (HEK293) cells. Here, we examined the molecular binding behavior of LVV-H7 on AT1R and its effect on AngII binding using a nanoluciferase-based bioluminescence resonance energy transfer (NanoBRET) assay in HEK293FT cells, as well as molecular docking and molecular dynamics (MD) studies. Saturation and real-time kinetics supported the positive effect of LVV-H7 on the binding of AngII. While the competitive antagonist olmesartan competed with AngII binding, LVV-H7 slightly, but significantly, decreased AngII’s k_D by 2.6 fold with no effect on its B_max. Molecular docking and MD simulations indicated that the binding of LVV-H7 in the intracellular region of AT1R allosterically potentiates AngII binding. LVV-H7 targets residues on intracellular loops 2 and 3 of AT1R, which are known binding sites of allosteric modulators in other GPCRs. Our data demonstrate the allosteric effect of LVV-H7 on AngII binding, which is consistent with the positive modulation of AT1R activity and signaling previously reported. This further supports the pharmacological targeting of AT1R by hemorphins, with implications in vascular and renal physiology.     

Breakage of wet flexible fiber agglomerates impacting a plane

The breakage of an agglomerate of wet flexible fibers impacting a plane is computationally investigated in this work using the discrete element method. In the agglomerate, the fibers stick together due to cohesive liquid bridge forces. Agglomerate breakage with various impact conditions, initial configurations, fiber properties, and liquid bridge properties is systematically investigated. The degree of breakage is governed by the impact energy, the cohesion energy due to liquid bridges, the energy dissipation/absorption through fiber–fiber contacts and fiber deformation, and the efficiency of force transmission within the agglomerate. More specifically, breakage is promoted by increasing impact velocity, decreasing agglomerate size, increasing initial compaction, increasing fiber bending modulus, decreasing liquid surface tension, and decreasing liquid-to-solid volume ratio. Breakage is strongly dependent on the modified Weber number, that is, the ratio of the Weber number to a dimensionless rupture distance, which is a measure of the impact energy relative to the cohesion energy.     

Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics–based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.     

Design of Trehalose-Based Amide/Sulfonamide C-type Lectin Receptor Signaling Compounds

Mincle agonists have been shown to induce inflammatory cytokine production, such as tumor necrosis factor-alpha (TNF) and promote the development of a Th1/Th17 immune response that might be crucial to development of effective vaccination against pathogens such as Mycobacterium tuberculosis. As an expansion of our previous work, a library of 6,6′-amide and sulfonamide α,α-d -trehalose compounds with various substituents on the aromatic ring was synthesized efficiently in good to excellent yields. These compounds were evaluated for their ability to activate the human C-type lectin receptor Mincle by the induction of cytokines from human peripheral blood mononuclear cells. A preliminary structure–activity relationship (SAR) of these novel trehalose diamides and sulfonamides revealed that aryl amide-linked trehalose compounds demonstrated improved activity and relatively high potency cytokine production compared to the Mincle ligand trehalose dibehenate adjuvant (TDB) and the natural ligand trehalose dimycolate (TDM) inducing dose-dependent and human-Mincle-specific stimulation in a HEK reporter cell line.     

Evaluating the Use of Daily Care Notes Software for Older People with Dementia

There has been little research to investigate the impact of software to support the care for older people with dementia care. This article reports the evaluation of software adapted to support one key person-centered task for the care of older residents with dementia – recording and sharing daily care notes. The evaluation on the dementia wing of 1 residential home for over 6 months revealed that use of the software on mobile devices carried by the carers increased the number and volume of daily care notes recorded, but only for the types of content that were already being recorded by carers. Carers reported more advantages that resulted from daily care notes once in digital form than from the documenting task, as well as barriers to the use of mobile digital software to record daily care notes.     

Lessons from a Minimal Genome: What Are the Essential Organizing Principles of a Cell Built from Scratch?

One of the primary challenges facing synthetic biology is reconstituting a living system from its component parts. A particularly difficult landmark is reconstituting a self-organizing system that can undergo autonomous chromosome compaction, segregation, and cell division. Here, we discuss how the syn3.0 minimal genome can inform us of the core self-organizing principles of a living cell and how these self-organizing processes can be built from the bottom up. The review underscores the importance of fundamental biology in rebuilding life from its molecular constituents.