Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

Comparison of Calculation and Measurement Data on Vibrational Characteristics of Pliable Coatings

The experimentally measured complex pliability of a viscoelastic coating is compared with the theoretical calculation carried out on the basis of the measured dynamic elastic modulus and the loss factors of the coating material. The coating thickness was chosen so that the frequency ranges of determination of the viscoelastic properties and of the complex pliability coincide.     

UNSTEADY-STATE SORPTION MEASUREMENTS A TEST OF DIFFERENT METHODS TO EVALUATE THE DIFFUSIVITY FROM UNSTEADY-STATE SORPTION MEASUREMENTS

Different simple methods for evaluating the diffusivity from a sorption measurement are presented and tested when there is a surface resistance (a limited mass transfer coefficient), a non-perfect step in relative humidity or non-Fickian effects. It is concluded that the different methods have different qualities and it is impossible to give a general recommendation on which method to use. The best tactic is probably to use more than one of the methods. A knowledge of the experimental conditions will help in choosing the best method.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Social comparison and affiliation under threat: Going beyond the affiliate-choice paradigm.

Examined the emotional similarity hypothesis, a derivation from social comparison theory, which predicts that increasing fear should lead to greater affiliation with someone who is awaiting the same threat (and who therefore is of relatively similar emotional status) relative to someone who has already experienced the threat (and who therefore is of relatively dissimilar emotional status). Results failed to support the emotional similarity hypothesis and in so doing challenged the importance of emotional comparison as a determinant of verbal affiliation under threat. Cognitive clarity concerns instead seemed to account better for the observed effects on verbal affiliation. Supplementary analyses of nonverbal affiliation (facial glances) likewise ran counter to an emotional similarity prediction. Effects of affiliation on anxiety were also examined. Previous conclusions regarding the pattern and causes of affiliation under threat that have relied on the affiliate-choice paradigm are considered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An efficient return algorithm for non-associated plasticity with linear yield criteria in principal stress space

An efficient return algorithm for stress update in numerical plasticity computations is presented. The yield criterion must be linear in principal stress space and can be composed of any number of yield planes. Each of these yield planes may have an associated or non-associated flow rule. The stress return and the formation of the constitutive matrix is carried out in principal stress space. Here the manipulations simplify and rely on geometrical arguments. The singularities arising at the intersection of yield planes are dealt with in a straightforward way also based on geometrical considerations. The method is exemplified on non-associated Mohr–Coulomb plasticity throughout the paper.     

Reliability Analysis of the Systems with Many States on the Basis of the Algebra of Tuples

A new approach to the modeling and analysis of systems with many states is set out, which makes it possible to perform calculations of probability characteristics of these systems. This approach relies on the algebra of tuples, with the aid of which a system with many states is represented in the form of an aggregate of multiple relations, so that the system proves to be isomorphic to the algebra of sets.     

An overall model for maintenance optimization

This paper presents an approach for identifying the optimal maintenance schedule for the components of a production system. Safety, health and environment objectives, maintenance costs and costs of lost production are all taken into consideration, and maintenance is thus optimized with respect to multiple objectives. Such a global approach to maintenance optimization requires expertise from various fields, e.g., decision theory, risk analysis and reliability and maintenance modelling. Further, a close co-operation between management, maintenance personnel and analysts is required to achieve a successful result. In the past this has been a major obstacle to the extensive use of proper maintenance optimization methods in practice, and techniques to promote the communication between the involved parties of the optimization process is an essential element in the suggested approach. A simple step by step presentation of the required modelling is provided. Contrary to most current methods of RCM (Reliability Centered Maintenance), the approach is based on an analytic model, and therefore gives a sound framework for carrying out a proper maintenance optimization. The approach is also flexible as it can be carried out at various levels of detail, e.g., adopted to available resources and to the managements willingness to give detailed priorities with respect to objectives on safety vs production loss.     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.