Studies on influence of hydrogen and carbon monoxide concentration on reduction progression behavior of molybdenum oxide catalyst

Temperature programmed reduction (TPR) analysis was applied to investigate the chemical reduction progression behavior of molybdenum oxide (MoO₃) catalyst. The composition and morphology of the reduced phases were characterized by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). The reduction progression of MoO₃ catalyst was attained with different reductant types and concentration (10% H₂/N₂, 10% and 20% CO/N₂ (%, v/v)). Two different modes of reduction process were applied. The first approach of reduction involved non-isothermal mode reduction up to 700 °C, while the second approach of reduction involved the isothermal mode reduction for 60 min at 700 °C. Hydrogen temperature programmed reduction (H₂-TPR) results showed the reduction progression of three-stage reduction of MoO₃ (Mo⁶⁺ → Mo⁵⁺ → Mo⁴⁺ → Mo⁰) with Mo⁵⁺ and Mo⁴⁺. XRD analysis confirmed the formation of Mo₄O₁₁ phase as an intermediate phase followed by MoO₂ phase. After 60 min of isothermal reduction, peaks of metallic molybdenum (Mo) appeared. Whereas, FESEM analysis showed porous crater-like structure on the surface cracks of MoO₂ layer which led to the growth of Mo phase. Meanwhile, the reduction of MoO₃ catalyst in 10% carbon monoxide (CO) showed the formation of unstable intermediate phase of Mo₉O₂₆ at the early stage of reduction. Furthermore, by increasing 20% CO led to the carburization of MoO₂ phase, resulted in the formation of Mo₂C rather than the formation of metallic Mo, as confirmed by XPS analysis. Therefore, the presented study shows that hydrogen gave better reducibility due to smaller molecular size, which contributed to high diffusion rate and achieved deeper penetration into the MoO₃ catalyst compared to carbon monoxide reductant. Hence, the reduction of MoO₃ in carbon monoxide atmosphere promoted the formation of Mo₂C which was in agreement with the thermodynamic assessment.     

Influence of receptor number on the stimulation by salmeterol of gene transcription in CHO-K1 cells transfected with the human beta2-adrenoceptor

We investigated the behavior of the antioxidant enzymes, superoxide dismutase (SOD), catalase (CAT), and ascorbate peroxidase (APx), in potato tubers during storage at low temperature. SOD activity increased temporarily within 3 weeks and was higher at 1 degree C than at 20 degrees C. APx activity also increased more at low (1 degree C) than at higher temperatures (5 and 20 degrees C). The contents of ascorbic acid (AsA), which is the substrate of APx, decreased immediately within 3 weeks and then gradually decreased until 15 weeks. The activity of CAT, the other enzyme which can scavenge hydrogen peroxide, decreased once in the first six weeks and thereafter increased to 15 weeks. Thus, the enhancement of the active oxygen-scavenging system that was induced by low temperature in potato tubers could result not only in a decrease of AsA but also in combined increases in APx and CAT activity whose manners were different.     

Adaptive Periodic Noise Reduction in Digital Images Using Fuzzy Transform

Journal of Mathematical Imaging and Vision - Periodic noise degrades the image quality by overlaying similar patterns. This noise appears as peaks in the image spectrum. In this research, a method...     

Autonomous mapping of HL7 RIM and relational database schema

Healthcare systems need to share information within and across the boundaries in order to provide better care to the patients. For this purpose, they take advantage of the full potential of current state of the art in healthcare standards providing interoperable solutions. HL7 V3 specification is an international message exchange and interoperability standard. HL7 V3 messages exchanged between healthcare applications are ultimately recorded into local healthcare databases, mostly in relational databases. In order to bring these relational databases in compliance with HL7, mappings between HL7 RIM (Reference Information Model) and relational database schema are required. Currently, RIM and database mapping is largely performed manually, therefore it is tedious, time consuming, error prone and expensive process. It is a challenging task to determine all correspondences between RIM and schema automatically because of extreme heterogeneity issues in healthcare databases. To reduce the amount of manual efforts as much as possible, autonomous mapping approaches are required. This paper proposes a technique that addresses the aforementioned mapping issue and aligns healthcare databases to HL7 V3 RIM specifications. Furthermore, the proposed technique has been implemented as a working application and tested on real world healthcare systems. The application loads the target healthcare schema and then identifies the most appropriate match for tables and the associated fields in the schema by using domain knowledge and the matching rules defined in the Mapping Knowledge Repository. These rules are designed to handle the complexity of semantics found in healthcare databases. The GUI allows users to view and edit/re-map the correspondences. Once all the mappings are defined, the application generates Mapping Specification, which contains all the mapping information i.e. database tables and fields with associated RIM classes and attributes. In order to enable the transactions, the application is facilitated with the autonomous code generation from the Mapping Specification. The Code Generator component focuses primarily on generating custom classes and hibernate mapping files against the runtime system to retrieve and parse the data from the data source—thus allows bi-directional HL7 to database communication, with minimum programming required. Our experimental results show 35–65% accuracy on real laboratory systems, thus demonstrating the promise of the approach. The proposed scheme is an effective step in bringing the clinical databases in compliance with RIM, providing ease and flexibility.     

Meat production characteristics of Egyptian Baladi and Angora goats

Fifteen Baladi and 20 Angora intact males raised together from birth until 8 months of age were grown on a commercial concentrate mixture fed at the rate of 0·6 kg/head/day with chopped wheat straw fed at 0·5 kg/head/day for 14 weeks. Body measurements were taken before slaughter and carcass measurements and offal weights after it. The right sides of all carcasses were dissected into cuts, weighed and deboned. Fat was separated from the 9-10-11 rib joints and estimated. The two breeds did not significantly differ in birth weight, weaning weight, carcass weight, dressing percentage, most body measurements, all carcass measurements and most offal weights. Sigmificant differences were only found in body length, height at withers, weights of spleen and kidney fat. However, the Baladi had significant heavier loin and shoulder (P < 0·05) and breast and flank (P < 0·05) than the Angora which had heavier legs (P < 0·05). The carcasses of the two breeds had very similar percentage of edible meat (68·38 versus 68·65), lean (57·47 versus 57·38) and fat in the rib joint (10·91 versus 11·27).     

Parallel query execution over encrypted data in database-as-a-service (DaaS)

The Journal of Supercomputing - The main challenge in database-as-a-service is the security and privacy of data because service providers are not usually considered as trustworthy. So, the data...     

Propylsulfonic acid-functionalized partially crystalline silicalite-1 materials: synthesis and characterization

Propylsulfonic acid-functionalized partially crystalline silicalite-1 materials were synthesized via one step co-condensation technique by varying the molar ratio of organosilane source, 3-mercaptopropyltrimethoxysilane (3MP) to tetraethylorthosilicate (TEOS) in the range of 0.05–0.30, and subsequent oxidation of thiol group to propylsulfonic acid using hydrogen peroxide (H₂O₂). These materials were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) and nitrogen adsorption–desorption method. The structure of these materials was determined by Fourier transform infrared spectroscopy (FT-IR) and ²⁹Si and ¹³C solid state NMR. XRD results show that % crystallinity of the materials decreased with the increase in 3MP concentration in the synthesis mixture. Selected area electron diffraction (SAED) showed the presence of crystalline and amorphous phases in the samples. An amorphous phase was formed when 3MP concentration was 30 mol% of the total silica source. After elimination of the structure directing agent (SDA) by calcination at 420 °C, thermogravimetric analysis (TGA) shows that the structure was thermally stable up to 550 °C. Ammonia temperature-programmed desorption (NH₃-TPD) shows that the acid capacity of these materials was in the range of 1.19–1.83 mmol H⁺/g, which shows that these materials could be used as potential heterogeneous acid catalyst.     

Flocculation-enhanced protein recovery from fish processing by-products by isoelectric solubilization/precipitation

Muscle proteins were recovered from rainbow trout processing by-products (fish meat leftover on bones, head, skin, and etc.) by isoelectric solubilization/precipitation. Muscle proteins precipitated at pH 5.5 are typically recovered by high-speed centrifugation at a laboratory scale, which appears to impede process scale-up. Our objective was to investigate the effect of flocculants on separation of precipitated proteins from process water (supernatant). Flocculants with different surface charge properties and molecular weights (M_w) were added to precipitated proteins. Protein separation was evaluated by determining optical density (OD) of the supernatant using Bradford dye-binding method. A high M_w anionic flocculent at 100 mg/L resulted in excellent protein separation following 10 min reaction. The OD of the supernatant was comparable to that of clear water, suggesting that even water-soluble fish muscle proteins were removed from the process water. Freeze-thaw cycles, commonly encountered in the fish processing industry, resulted in even more rapid flocculation reaction. This flocculent could be added to a bio-reactor that precipitates muscle proteins at pH 5.5 in a continuous isoelectric solubilization/precipitation system. However, effects of the flocculants on human and animal health should be determined and appropriate approvals obtained before the recovered muscle proteins can be used in human food products and/or animal feeds.     

Antibiotics from the newly isolated Streptomyces elizabethii. II. Isolation and characterisation of the antibiotics

The principal antibiotics formed by Streptomyces elizabethii have been isolated and identified as actinomycins IV and V, together with a methylpentaene macrolide, elizabethin, stereoisomeric with previously reported compounds.