Changes in the state of heat-resistant steel induced by repeated hot deformation

This work deals with the problems of structural regeneration by thermal restoration treatment (TRT). These include the lack of a structural sign showing that TRT is possible, a consensus on TRT modes, the data on the necessary relaxation depth of residual stresses, or criteria of structural restoration. Performing a TRT without solving these problems may deteriorate the properties of steel or even accelerate its destruction. With this in view, the purpose of this work is to determine experimentally how the residual stress state changes under thermal and mechanical loads in order to specify the signs of the restoration of structure and structural stability. The object of this research is unused 12Cr1MoV steel that has been aged naturally for 13 years. Using X-ray dosimetry with X-ray spectral analysis, we study the distribution of internal residual stresses of the first kind during the repeated hot deformation. After repeated thermal deformation, the sample under study transforms from a viscoelastic Maxwell material into a Kelvin-Voigt material, which facilitates structural stabilization. A sign of this is the relaxation limit increase, prevention of continuous decay of an α-solid solution of iron and restoration of the lattice parameter.     

Synthesis and gas permeation parameters of metathesis polytricyclononenes with pendant Me3E‐groups (E = C,Si, Ge)

Metathesis polytricyclononenes were synthesized via ROMP polymerization in the presence of the 1‐st generation Grubbs catalyst and their gas‐transport properties were studied for the first time. The aim of this work was to evaluate the influence of Me₃E‐groups (E = C, Si, Ge) on gas permeation parameters of ROMP materials. New metathesis poly(3‐tert‐butyltricyclononene‐7) and poly(3‐trimethylgermyltricyclononene‐7) were obtained with high yields (up to 95%) and high‐molecular weights (M_w～3–7×10⁵ g mol^?1). The glass transition temperatures of the ROMP polytricyclononenes with Me₃E‐groups decreased when E was changed from C to Si and then to Ge. It was shown that the polytricyclononene containing Me₃Si‐groups has the highest gas permeability while the polytricyclononene containing Me₃C‐substituents has the lowest gas permeability. In addition, the gas permeation parameters were estimated for ROMP Me₃Si‐ and Me₃Ge‐substituted polytricyclonona‐3,7‐dienes. So the influence of the second double bond in the monomer units on the permeability of the polymers obtained was studied. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41395.     

I2-doped and pyrrole ring-iodinated semi-conducting oligomers of N-vinyl-3-alkyl-2-phenylpyrroles

I₂-doped and pyrrole ring-iodinated semi-conducting oligomers of N-vinyl-3-alkyl-2-phenylpyrroles have been synthesized by free-radical polymerization of the above monomers (AIBN, 2–5 wt%, 60–80 °C) and further exposure of the oligomers obtained to I₂ vapor. The parent oligomers exhibit paramagnetic and fluorescent properties and stable up to 300–370 °C.     

Transformation of CH4 and liquid fuels into syngas on monolithic catalysts

Active components comprised of fluorite-like Ln_x(Ce_0.5Zr_0.5)_1−xO_2−y (Ln = La, Pr, Sm) and perovskite-like La_0.8Pr_0.2Mn_0.2Cr_0.8O₃ mixed oxides and their composites with yttria-doped zirconia (YSZ) promoted by precious metals (Pt, Ru) and/or Ni were supported on several types of heat-conducting substrates (compressed Ni-Al foam, Fecralloy foil or gauze protected by corundum layer, Cr-Al-O microchannel cermets, titanium platelets protected by oxidic layer) as well as on honeycomb corundum monolithic substrate. These structured catalysts were tested in pilot-scale reactors in the reactions of steam reforming of methane, selective oxidation of decane and gasoline and steam/autothermal reforming of biofuels (ethanol, acetone, anisole, sunflower oil). Applied procedures of supporting nanocomposite active components on monolithic/structured substrates did not deteriorate their coking stability in real feeds with a small excess of oxidants, which was reflected in good middle-term (up to 200 h) performance stability promising for further up-scaling and long-term tests. Equilibrium yield of syngas at short contact times was achieved by partial oxidation of decane and gasoline without addition of steam usually required to prevent coking. For the first time possibility of successive transformation of biofuels (ethanol, acetone, anisole, sunflower oil) into syngas at short contact times on monolithic catalysts was demonstrated. This was provided by a proper combination of active component, thermal conducting monolithic substrates and unique evaporation/mixing unit used in this research.     

Magnetometric Studies of Catalyst Refuses in Nanocarbon Materials

It is shown that magnetometry can be employed as an effective tool to control the content of a ferromagnetic constituent in nanocarbon materials. We propose a thermochemical treatment protocol to achieve extensive cleaning of the source nanocarbon materials from ferromagnetic refuses.     

Miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks based on polyurethane and poly(hydroxyethyl methacrylate)

The thermodynamic miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks (semi‐IPNs) of crosslinked polyurethane (PU) and linear poly(hydroxyethyl methacrylate) (PHEMA) have been investigated. The free energies of mixing of the semi‐IPN components have been determined by the vapour sorption method and it was established that the parameters are positive and depend on the amount of PHEMA in the semi‐IPN samples. Thermal analyses glass transition temperatures evidenced two in the semi‐IPNs in accordance with the investigation of the thermodynamic miscibility of these systems. Dynamic mechanical analysis revealed a pronounced change in the viscoelastic properties of the PU‐based semi‐IPNs with different amounts of PHEMA in the samples. The semi‐IPNs have two distinct tan δ maxima related to the relaxations of the two polymers in their glass temperature domains. The temperature position of PU relaxation maximum tan δ is invariable but its amplitude decreases in the semi‐IPNs with increasing amount of PHEMA in the systems. The tan δ maximum of PHEMA is shifted to a lower temperature and its amplitude decreases with increasing amount of PU in the semi‐IPNs. The segregation degree of components α was calculated using the viscoelastic properties of semi‐IPNs. It was concluded that the studied semi‐IPNs are two‐phase systems with incomplete phase separation. The different levels of immiscibility lead to the different degree of phase separation in the semi‐IPNs with compositions. Copyright © 2004 Society of Chemical Industry     

Laser4F3/2→4I9/2and4F3/2→4I13/2transitions in KY(WO4)2:Nd3+

We report the observation of lasing at 0.9137 μm and 1.3545 μm in neodymium-doped KY(WO4)2at 77 K. Transition cross sections, fluorescent line width, and branching ratios are given.