Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

3D Radiation Therapy Boost Improves the Outcome of Whole Brain Radiation Therapy Treated RPA II Patients with One or Two Brain Metastases

Purpose

to evaluate the role of whole brain radiotherapy (WBRT) and radiation boost (RB) for 208 patients recursive partitioning analysis (RPA) II with 1 or 2 brain metastases (BM) at a single institution.

Methods and Materials

the dose of WBRT was 30 Gy (10 fractions of 3 Gy). One hundred thirty-two patients (63.5%) benefited from RB of 9 Gy in 3 fractions of 3 Gy at the metastatic site. Patients had 1 or 2 BM in 122 (58.7%) and 86 cases (41.3%), respectively.

Results

patients with one or two metastases had similar survival (4.6 and 5.1 months, respectively) (p = 0.4). Median overall survival (OS) for patients treated with WBRT and RB, and with WBRT alone was 5.9 and 3.7 months, respectively (p = 0.03). The 6-, 12- and 24-month OS rates after WBRT and RB were 48.5%, 25% and 10.6%, respectively, while WBRT alone resulted in OS rates of 34%, 22.4% and 3.2%, respectively (p = 0.03). After WBRT and RB, the 6-, 12- and 24-month local control rates were 92%, 82% and 67%, respectively, while they were 81.2%, 75% and 37.5%, respectively, after WBRT alone (p = 0.03). The 6-, 12- and 24-month brain control rates after WBRT and RB were 88.7%, 75.8% and 62%, respectively, and after WBRT alone they were 78.5%, 59% and 37.7%, respectively (p = 0.03).

Conclusion

additional boost delivered with 3D conformal radiotherapy improves local and brain control rates significantly as well as overall survival for RPA II patients with 1 or 2 unresectable BM.     

Cancer Stem Cells: Biological Functions and Therapeutically Targeting

Almost all tumors are composed of a heterogeneous cell population, making them difficult to treat. A small cancer stem cell population with a low proliferation rate and a high tumorigenic potential is thought to be responsible for cancer development, metastasis and resistance to therapy. Stem cells were reported to be involved in both normal development and carcinogenesis, some molecular mechanisms being common in both processes. No less controversial, stem cells are considered to be important in treatment of malignant diseases both as targets and drug carriers. The efforts to understand the role of different signalling in cancer stem cells requires in depth knowledge about the mechanisms that control their self-renewal, differentiation and malignant potential. The aim of this paper is to discuss insights into cancer stem cells historical background and to provide a brief review of the new therapeutic strategies for targeting cancer stem cells.     

Mapping micromechanical properties of soft polymer contact lenses

We present comparative micromechanical characterization of several commercial soft silicone hydrogel contact lenses, which allows for the examination of spatial distribution of different regions with local mechanical properties within the lens under practical wet conditions. We employ elastic contact mechanic model and corresponding analysis of force–distance curves collected with high-resolution atomic force microscopy measurements performed within elastic deformation limits. The measurements were performed on the lens cross section to map the micromechanical properties distribution within the sub-surface regions and bulk material of the different lens. In addition, we have studied topography and mechanical properties of the lens surfaces, which come into direct contact with the surface of the eye and eyelid. AFM images show high contrast distribution maps for the adhesive and mechanical properties of the different microstructured regions such as pores, lamellae and different material inclusions within the lenses. Additional indentation experiments allow for collection of quantitative data for micromechanical properties from different regions within the lens structure and correlate these data with lens-averaged macroscopic measurements available in the literature.     

Using thorium to reduce the maximum fuel temperatures during depressurized loss of coolant accidents in a once-through-then-out (OTTO) PBMR DPP-400 core

This article presents the results for the PBMR-DPP-400, but for a once-through-then-out (OTTO) refueling scheme. An optimization attempt of the axial and radial power profiles is reported. The main aim was to reduce the maximum depressurized loss of forced coolant (DLOFC) temperature by adding thorium to the fuel and making the fuel layout radially asymmetric by placing lower enriched fuel in the inner and higher enriched fuel in the outer fuel flow regions. These measures (1) flattened the peaks in the axial power profiles and thus suppressed the hotspots in the axial DLOFC temperature profiles and (2) ‘pushed’ the power radially outwards, so as to reduce the distance that the decay heat must be evacuated towards the outside of the fuel core. This resulted in a huge reduction in the maximum DLOFC temperature for the OTTO cycle from 2273 to 1811 °C, which is still above the 1600 °C limit but represents a remarkable result. Maximum DLOFC temperature below the 1600 °C limit was obtained by reducing the power output. The results obtained and the proposed strategies for further improvement are applicable to the Chinese HTR-PM and could produce even better results in Prismatic Block Reactors such as the Japanese HTTR.     

The ETH‐MAV Team in the MBZ International Robotics Challenge

This study describes the hardware and software systems of the Micro Aerial Vehicle (MAV) platforms used by the ETH Zurich team in the 2017 Mohamed Bin Zayed International Robotics Challenge (MBZIRC). The aim was to develop robust outdoor platforms with the autonomous capabilities required for the competition, by applying and integrating knowledge from various fields, including computer vision, sensor fusion, optimal control, and probabilistic robotics. This paper presents the major components and structures of the system architectures and reports on experimental findings for the MAV‐based challenges in the competition. Main highlights include securing the second place both in the individual search, pick, and place the task of Challenge 3 and the Grand Challenge, with autonomous landing executed in less than 1 min and a visual servoing success rate of over for object pickups.     

Optimization of a plate with holes

We consider a simply supported plate with constant thickness, defined on an unknown multiply connected domain. We optimize its shape according to some given performance functional. Our method is of fixed domain type, easy to be implemented, based on a fictitious domain approach and the control variational method. The algorithm that we introduce is of gradient type and performs simultaneous topological and boundary variations. Numerical experiments are also included and show its efficiency.