Extraction of Vanadium(V) from Mixed Chloride/Thiocyanate Solutions with Two Commercial Solvating Extractants

Studies on the extraction and separation of vanadium(V) from mixed hydrochloric acid/ammonium thiocyanate solution with CYANEX 921 and CYANEX 925 in kerosene were carried out. The effects of various factors affecting the extraction process as well as temperature were investigated. Addition of thiocyanate to the chloride solution was found to enhance markedly the extraction of vanadium. HCl solution efficiently stripped V(V). The number of stages required for extraction and stripping of vanadium ions was determined from the McCabe–Thiele diagram. Based on the obtained results, the separation of V(V) from spent catalyst leach indicates the efficiency of the proposed process.     

Efficient recursive least squares parameter estimation algorithm for accurate nanoCMOS variable gain amplifier performances

ABSTRACT

With the aggressive scaling of integrated circuit technology, parametric estimation is a critical task for designers who looked for solutions to the challenges of some Nanoscale CMOS parameters. This paper presented the prediction of primary parameters of CMOS transistor for 16 nm to 10 nm process nodes using both of Bisquare Weights (BW) method and a novel recursive least squares (RLS) parameter estimation algorithm. The proposed RLS algorithm consists of the minimisation of a quadratic criterion relating to the prediction error in order to attain the best estimated parameters of the developed mathematical model. The obtained results thanks to the proposed RLS algorithm were better than those reached using the BW method. Comparisons between Predictive Technology Model (PTM) data and parameters estimated with RLS algorithm were made to check the validity and the consistency of the proposed algorithm. These predicted primary parameters were helpful to estimate and to optimise the performances of the Variable Gain Amplifier (VGA) which was a basic circuit element with a key role in the design of new upcoming receivers.     

The Solutions on One-Dimensional Dirac Oscillator with Energy-Dependent Potentials and Their Effects on the Shannon and Fisher Quantities of Quantum Information Theory

Journal of Low Temperature Physics - In this paper, we focus, at first, on the exact solutions on the one-dimensional Dirac oscillator with the energy-dependent potentials. Then, the influence of...     

Using Fuzzy Cost‐Based FMEA,GRA and Profitability Theory for Minimizing Failures at a Healthcare Diagnosis Service

This paper proposes an integrated approach to identify, evaluate and improve the potential failures in a service setting. This integrated approach combines Fuzzy cost‐based service‐specific FMEA (FCS‐FMEA), Grey Relational Analysis (GRA) and profitability theory for better prioritization of the service failures by considering cost as an important issue and using the profitability theory in a way that the corrective actions costs are taken into account. Considering profitability with FCS‐FMEA and GRA reduces the losses caused by failure occurrence. Besides, a maximization linear mathematical problem is used to select the best mix of failures to be repaired. We apply our approach to an academic example concerning the potential failures diagnosis of the Internal Medicine service of a hospital located in Seoul, Korea. We applied our approach and solved the associated maximization problem by a commercial solver, producing an optimal solution which indicates the most convenient mix of failures to be repaired by considering available budget. Copyright © 2013 John Wiley & Sons, Ltd.     

S-parameter performance degradation in power RF N-LDMOS devices due to hot carrier effects

This paper reports comparative study of technology reliability after accelerated ageing tests under various conditions (electrical and/or thermal stress) and RF life-tests reliability with pulsed bench for radar applications in S-band. It is important to understand the effects of the reliability degradation mechanisms on the S-parameters and in turn on static and dynamic parameters.The analysis of the experimental results is presented and the physical processes responsible for the observed degradation at different stress conditions are studied by means of 2D ATLAS–SILVACO simulations.S-parameters degradation of hot-carrier stressed n-MOS transistors can be explained by the transconductance and miller capacitance shifts, which are resulted from the interface state generation (traps), which results in a build up of negative charge at Si/SiO₂ interface. More interface states are created due to a located maximum impact ionization rate at the gate edge. From our experimental results, hot electron induced RF performance degradation should be taken into consideration in the design of the power RF MOS devices.     

Selective determination of ascorbic acid with a novel hybrid material based 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and the Dawson type ion [P2Mo18O62] immobilized on glassy carbon

In this study, we synthesized a new hybrid material using well-Dawson K₆[P₂Mo₁₈O₆₂]·nH₂O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). CHN elemental analysis showed that one mole of [P₂Mo₁₈O₆₂]⁶⁻ reacts with 6 moles of [BMIM]⁺ to form [BMIM]₆P₂Mo₁₈O₆₂. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid material compared to the parent Dawson POM. The new hybrid material [BMIM]₆P₂Mo₁₈O₆₂ was immobilized on glassy carbon (GC) electrode and the modified electrode was investigated by cyclic voltammetry and amperometry. Compared to the electrochemical behavior of dissolved [P₂Mo₁₈O₆₂]⁶⁻, a slight shift in the redox peaks towards negative potentials is observed for the immobilized [BMIM]₆P₂Mo₁₈O₆₂. The relationship between the peak currents of the deposited [BMIM]₆P₂Mo₁₈O₆₂ film and scan rate is shown to be linear, which demonstrates a surface-confined electron transfer processes. [BMIM]₆P₂Mo₁₈O₆₂ modified electrode showed high sensitivities towards pH and shown to be active even at neutral pH. [BMIM]₆P₂Mo₁₈O₆₂ modified GC electrode was subjected to cyclic voltammetry and amperometry in the presence of ascorbic acid (AA) and found to exhibit a remarkable catalytic activity towards the oxidation of AA. The catalytic oxidation peak of AA at [BMIM]₆P₂Mo₁₈O₆₂ modified GC electrode occurs at low potential of ∼0 V vs Ag/AgCl at neutral pH and shifts to more positive potentials when pH decreases. Comparison between [BMIM]₆P₂Mo₁₈O₆₂ and [P₂Mo₁₈O₆₂]⁶⁻ modified GC films towards the oxidation of AA suggests that the significant decrease in the overpotentials recorded with [BMIM]₆P₂Mo₁₈O₆₂ film is related to the presence of ionic liquid cation in the hybrid material, which probably plays the role of the redox mediator. The resulting AA sensor [BMIM]₆P₂Mo₁₈O₆₂/GC has a significant sensitivity of ∼63 nA/μM AA, fast response time (<9 s), low detection limit (<0.1 μM), high selectivity towards endogenous interferences such as uric acid, acetaminophen and dopamine, a linear range from 0.1 μM to at least 22 mM AA and was stable for at least 2 weeks. In addition, such AA sensors can operate in a pH range from 0 to at least 7.     

Alternating current electrophoretic deposition of Saccharomyces cerevisiae cells and the viability of the deposited biofilm in ethanol production

In this work, we have explored the possibility of using asymmetrical alternating current electrophoretic deposition (AC-EPD) process, which we have previously reported for enzyme deposition, to immobilize Saccharomyces cerevisiae (S. cerevisiae) cells onto stainless steel substrates. The deposition of S. cerevisiae cells at 30 Hz and 200 V_p-p permits the formation of 89 ± 16 μm thick cell layers in 30 min. The mass of the deposited cells is shown to increase quasi-linearly with the deposition time and the applied amplitude. In order to increase the mechanical stability of the immobilized cells, a thin layer of polyurethane was applied after the AC-EPD of S. cerevisiae cells. The viability of the immobilized cells was tested in the production of ethanol. The results showed that the fermentation process with the immobilized S. cerevisiae cells is more efficient than the fermentation carried out with similarly treated free cells.