Babesia Bovis Ligand-Receptor Interaction: AMA-1 Contains Small Regions Governing Bovine Erythrocyte Binding

Apical membrane antigen 1 is a microneme protein which plays an indispensable role during Apicomplexa parasite invasion. The detailed mechanism of AMA-1 molecular interaction with its receptor on bovine erythrocytes has not been completely defined in Babesia bovis. This study was focused on identifying the minimum B. bovis AMA-1-derived regions governing specific and high-affinity binding to its target cells. Different approaches were used for detecting ama-1 locus genetic variability and natural selection signatures. The binding properties of twelve highly conserved 20-residue-long peptides were evaluated using a sensitive and specific binding assay based on radio-iodination. B. bovis AMA-1 ectodomain structure was modelled and refined using molecular modelling software. NetMHCIIpan software was used for calculating B- and T-cell epitopes. The B. bovis ama-1 gene had regions under functional constraint, having the highest negative selective pressure intensity in the Domain I encoding region. Interestingly, B. bovis AMA-1-DI (¹⁰⁰YMQKFDIPRNHGSGIYVDLG¹¹⁹ and ¹²⁰GYESVGSKSYRMPVGKCPVV¹³⁹) and DII (³⁰²CPMHPVRDAIFGKWSGGSCV³²¹)-derived peptides had high specificity interaction with erythrocytes and bound to a chymotrypsin and neuraminidase-treatment sensitive receptor. DI-derived peptides appear to be exposed on the protein’s surface and contain predicted B- and T-cell epitopes. These findings provide data (for the first-time) concerning B. bovis AMA-1 functional subunits which are important for establishing receptor-ligand interactions which could be used in synthetic vaccine development.     

Effects of feed composition,protein denaturation and storage of milk serum protein/lactose powders on lactosylation

During whey powder production, the feed is subjected to several heat treatments which can cause lactosylation of proteins. In this study, lactosylation of whey proteins was evaluated in spray-dried powders before and after storage by varying the native protein fraction as well as the serum protein/lactose ratio in the powders. The lactosylation of native α-lactalbumin and β-lactoglobulin in the powders before storage was not affected to a large extent by the protein denaturation or if the feed had been heat treated in a high or low lactose environment. After storage (relative humidity of 23.5%, 30 °C, 25 days), the kinetic of lactosylation tended to increase with increasing native protein fraction and bulk protein content in the powders. An explanation could be that proteins dissolved in the lactose glassy structure might have a lower reactivity, while proteins present in the protein glassy structure with dissolved lactose may display higher lactosylation reactivity.     

Compositional characteristics,texture, shelf-life and sensory quality of snack crackers produced from non-traditional ingredients

The study was conducted to evaluate the effect of non-traditional and highly available and nutrient-dense ingredients in the production of value-added crackers. The crackers were prepared by combining partially defatted chia flour, wheat germ, quinoa, and oat. The antioxidant activity and the polyphenol content were 7.0–8.4 times higher in crackers produced with non-traditional ingredients compared to the control snack. The hydroperoxide value indicated a low oxidative deterioration of the oil. The sample with 10% of partially defatted chia flour was selected for shelf-life test under storage conditions and sensory evaluation. Modified atmosphere exerted a protective effect on the lipid stability regardless of the incorporation of BHT to the formulation. All the evaluated attributes scored highly during consumer acceptance. The formulated cracker presented a relevant content of protein, dietary fibre and omega-3 and -6 fatty acids. Based on these results, the crackers containing non-traditional ingredients resulted in a product with a good potential for both consumer acceptance and outstanding nutritional benefits.     

Chitosan Microspheres as Carriers for pH‐Indicating Species in Corrosion Sensing

Chitosan microspheres containing bromocresol green, cresol red, and phenolphthalein for corrosion detection, through pH change, are synthesized in order to be used in protective coatings for aluminium alloys. Microspheres containing corrosion detection species are characterized morphologically (SEM) and physico‐chemically (FTIR, TGA). Release studies (UV–vis) are performed in corrosion‐promoting conditions (pH, NaCl), and detection studies by immersion in media associated with corrosion activity while microspheres' sensing activity is evaluated visually. Electrochemical characterization of AA2024 substrates in the presence of chitosan spheres is performed to understand material performance, and a color change is observed as a result of local pH increase in cathodic areas when corrosion takes place. These findings can be correlated with the results from release studies and seem a promising approach for corrosion sensing purposes, not only because pH increase is possible to detect due to corrosion, but also because chitosan is considered an environmentally friendly material.     

Manganese ferrite-polyaniline hybrid materials: Electrical and magnetic properties

Magnetic MnFe₂O₄ nanopowders were synthesized by an original solvothermal method in the absence and in the presence of tetra-n-butylammonium bromide (TBAB) and Tween 80 (TW) as surfactants. Manganese ferrite/polyaniline (PANI) hybrid materials were synthesized by in situ polymerization of aniline on the surface of MnFe₂O₄ using ammonium persulfate as oxidant. The purpose of the study was to investigate the influence of the two surfactants on the properties of the MnFe₂O₄ powders and of their composites with PANI. The specific surface area, the cumulative surface area of pores and the cumulative volume of pores are influenced by the nature of surfactant in case of MnFe₂O₄ powders and are higher by comparison to those of the MnFe₂O₄/PANI hybrid materials. The values of saturation magnetization in case of MnFe₂O₄ powders are higher than those of the hybrid materials and are not influenced by the surfactant nature. These features revealed that MnFe₂O₄ powders can be efficiently used as adsorbents for the purification of wastewaters. The values of the electrical conductivity of the composites exhibit a significant increase in comparison to the MnFe₂O₄ powders and depend on the surfactant nature. The highest value of electrical conductivity was achieved by the composite obtained using Tween 80 as surfactant (σ_DC = 54.5·10^?5S?m^?1) which was close to that of PANI (σ_DC = 61.2·10^?5 S?m^?1). The fact that the magnetic and electric properties of the synthesized MnFe₂O₄/PANI composites can be changed by design, demonstrate the high potential of these materials to be used in magneto-electric applications.     

Synthesis of a highly hydrophobic silica mesostructure by a modified co-condensation procedure and evaluation of its drug release capability

A highly hydrophobic silica mesostructure was synthesized by a modification on the conventional co-condensation procedure that involved the partial substitution of hexadecytltrimethylammonium, used as mesostructure directing agent, by hexadecyltrimethoxysilane. That modification allowed the production of a highly ordered hexagonal silica mesostructure with the mesopores partially filled with high amounts of hexadecyl chains, covalently bonded to inorganic framework. After extracting the reminiscent template molecules, ibuprofen was loaded into the mesostructure in order to evaluate its drug release properties. The drug loading amount (21 wt%) was comparable to the one reported for MCM-41 with grafted propylamine groups (25 wt%), indicating that C₁₆-chains were not fully compacted occluding the pores. A slow ibuprofen release was observed in simulated body fluid (pH 7.2) by a process controlled by an anomalous transport with contribution of diffusional and relaxational components, according to the Korsmeyer-Peppas kinetics model. That hydrophobic mesostructure produced has the potential of being use as a carrier for low water soluble drugs with an extended delivery effect, but without the disadvantages of co-releasing toxic surfactant molecules or the need of non-toxic specific templates to be prepared.     

Triethanolamine Stabilization of Methotrexate-β-Cyclodextrin Interactions in Ternary Complexes

The interaction of methotrexate (MTX) with beta-cyclodextrin (β-CD) in the presence of triethanolamine (TEA) was investigated with the aim to elucidate the mechanism whereby self-assembly cyclodextrin systems work in association with this third component. Solubility diagram studies showed synergic increment of the MTX solubility to be about thirty-fold. Experiments using 2D ROESY and molecular modeling studies revealed the inclusion of aromatic ring III of the drug into β-CD cavity, in which TEA contributes by intensifying MTX interaction with β-CD and stabilizes MTX:β-CD:TEA ternary complex by electrostatic interaction. The maintenance of these interactions in solid phase was also studied in ternary MTX:β-CD:TEA and comparisons were made with freeze dried binary MTX:β-CD and physical mixtures. FTIR studies evidenced that MTX–β-CD interaction remained in solid ternary complexes, which was also supported by thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TG)/first derivative of TG analysis (DTG) and C,N,H elementary analysis) and structural (X-ray diffraction analysis, (XRD)) studies, mainly regarding the increment of drug stability. The efficient in vitro drug dissolution studies successfully demonstrated the contribution of ternary complexes, which highlights the importance of this possible new raw material for further applications in drug delivery systems.     

Sensitivity and Performance of Energetic Materials

This paper provides an overview of the main developments over the past nine years in the study of the sensitivity of energetic materials (EM) to impact, shock, friction, electric spark, laser beams, and heat. Attention is also paid to performance and to its calculation methods. Summaries are provided of the relationships between sensitivity and performance, the best representations for the calculation methods of performance being the volume heat of explosion or the product of crystal density and the square of detonation velocity. On the basis of current knowledge, it is possible to state that a single universal relationship between molecular structure and initiation reactivity does not yet exist. It is confirmed that increasing the explosive strength is usually accompanied by an increase in the sensitivity. In the case of nitramines this rule is totally valid for friction sensitivity, but for impact sensitivity there are exceptions to the rule, and with 1,3,5‐trinitro‐1,3,5‐triazepane, 1,3,5‐trinitro‐1,3,5‐triazinane, β‐1,3,5,7‐tetranitro‐1,3,5,7‐tetrazocane, and the α‐, β‐ and ε‐polymorphs of 2,4,6,8,10,12‐hexanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane the relationship works in the opposite direction. With respect to the QSPR approach there might be reasonably good predictions but it provides little insight into the physics and chemistry involved in the process of initiation.