Tissue culture assays using Caco-2 cell line differentiate virulent from non-virulent Listeria monocytogenes strains

OBJECTIVE: Fibroblast growth factor 9 (FGF-9) is a relatively new member of the FGF family isolated from the conditioned medium of a human glioblastoma cell line as a secreting type factor that exhibits a growth-stimulating effect on primary glial cells. To elucidate the roles of FGF-9 in human brain tumors, the expression and biological activities of FGF-9 were studied using culture cells and surgically obtained tumor specimens. METHODS: Measurement of FGF-9 and basic FGF in conditioned media of cell cultures was performed by using a sandwich enzyme immunoassay. The mitogenic effect of FGF-9 was evaluated by cell growth studies. FGF-9 expression in vivo was demonstrated by immunohistochemistry. RESULTS: One of 4 glioma cell lines and 4 of 16 human meningiomas examined actually secreted detectable amounts of FGF-9 proteins. In comparison, basic FGF production was detected from 3 of 4 glioma cell lines and 11 of 16 human meningiomas. Similarly to basic FGF, recombinant human FGF-9 significantly stimulated the in vitro cell proliferation in three of four glioma cell lines investigated in a dose-dependent manner. A time course growth study using U87 MG cells revealed an accelerated growth stimulation by FGF-9 after Day 4. The growth stimulatory activity was also shown in three of four human meningiomas studied. Moderate to strong immunoreactivity for FGF-9 was observed in 40 (82%) of 49 human brain tumors examined irrespective of origin, tumor type, grade of malignancy, or whether initial or recurrent. In contrast, strong immunostaining was localized in neurons in the normal human cerebral cortex. CONCLUSION: The present findings suggest that FGF-9 may be involved in the biology of human brain tumors with a possible importance in tumor cell growth. Whether the growth factor is more generally involved in oncogenesis of human tumors awaits further investigation.     

Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

Aramid pulp reinforced hydrogenated nitrile butadiene rubber composites with ionic liquid compatibilizers

Although carbon black is an effective reinforcement for most rubbers, its replacement by other fillers would be beneficial. Aramid fibers are used in a range of applications in the rubber industry, providing dimensional stability prior to vulcanization and improving the mechanical properties of the elastomeric product. Nevertheless, their relatively inert surface is an obstacle in the exploitation of their full potential. In this work, two ionic liquids were investigated as compatibilizers in the preparation of hydrogenated nitrile butadiene rubber composites with aramid pulp and carbon black fillers. The materials were characterized using swelling, hardness and tensile tests, differential scanning calorimetry, thermal gravimetric analysis, and infrared spectroscopy. The carbon black-free composite prepared from aramid pulp treated with 1.0 wt% of 1-carboxymethyl-3-methylimidazolium chloride outperformed all other studied materials, presenting a higher modulus at 100% strain (7.31 MPa), while maintaining high strain at break. Thus, ionic liquids were found to potentialize the aramid reinforcement effect in these rubber composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48702.     

SBS nanocomposites as toughening agent for polypropylene

The toughening of polypropylene [PP] with styrene–butadiene–styrene rubber [SBS]/montmorillonite [MMT] nanocomposites was investigated with respect to morphological, thermal, and mechanical properties. The MMT/SBS nanocomposites were prepared in an internal mixer, using an epoxidized SBS [SBSe] to investigate its effect as a compatibilizer. The MMT/SBS nanocomposite was added to PP up to 10 wt%, aiming at material toughening. Transmission electron microscopy (TEM) revealed MMT induced dispersed-phase reductions when compared to typical PP/SBS blends. In addition, changes in the PP crystallization process were observed in the presence of the nanocomposite. Surprisingly, the use of nanofiller, combined with SBSe compatibilizer agent, increased the PP impact strength by about 60%, with no reduction in the tensile module.     

An economic–probabilistic model for project selection and prioritization

This paper presents an economic–probabilistic model for project selection and prioritization that enables necessary investments and potential benefits and their inherent variability to be quantified, thus providing a stochastic analysis of expected returns for projects. The model was developed in three steps: definition of criteria; definition of the most appropriate method to be used; and model building. A practical test to evaluate the applicability and usefulness of the model comprising a portfolio of investment projects at a power distribution company was conducted. The results show three major contributions of the proposed model: i) a set of sufficiently complete criteria, ii) the combined use of economic and probabilistic approaches which qualifies the information available to decision makers, and iii) the use of financial language, which is more easily understood and has a concrete meaning for both management and technical staff.     

Electrochemical treatment of diluted cyanide aqueous wastes

The electrochemical oxidation of diluted cyanide aqueous wastes has been studied in a single compartment electrochemical flow cell. It has been determined that the anode material influences greatly the process's performance. Boron doped diamond and PbO₂ anodes can oxidize these wastes in the presence of both sulfate or chloride anions. On the contrary, dimensional stable anodes cannot oxidize cyanide in sulfate‐containing wastewaters, and require the presence of chloride ions. The oxidation of cyanides leads to the formation of cyanate in a first step, and later to the formation of carbon dioxide and nitrogen. There is a net consumption of hydroxyl ions during the process. Energy consumptions in the range 20–70 kWh m^?3 are required to decrease the initial pollutant load by 70–80%. Global current efficiencies in the range 3–8% are obtained. These low current efficiencies are justified by the low cyanide concentrations that the wastes used in this work contain. Copyright © 2005 Society of Chemical Industry     

Dynamically vulcanized PP/EPDM blends: Influence of curing agents on the morphology evolution

Thermoplastic vulcanizates (TPE‐Vs) are a special class of thermoplastic elastomers (TPEs), where the rubber phase is dynamically crosslinked in the presence of a thermoplastic matrix. The goal of this work is to compare the behavior of two curing agents systems, conventional peroxide named Peroximon and bismaleimide/dicumyl peroxide, in TPE‐Vs based on PP/EPDM 35/65 w/w. It was also investigated the TPE‐Vs morphological evolution and samples was collected at different times during the mixture and dynamic crosslinking. The materials were characterized by some techniques, which allowed investigating mechanical, morphological, hardness, and swelling properties. Considering the used curing agents contents, the TPE‐Vs obtained by using Peroximon presented lower tensile strength, lower swelling degree, and remarkable lower deformation than those obtained with BMI/DCP system. The hardness properties were not significantly affected by the content of the curing agent, showing only a slight decrease when the Peroximon content was increased. The study of the evolution of morphology showed the rubber phase undergoes crosslinking after adding the curing agent. It could be observed by the increase of the torque and by the appearance of domains in the micrographs. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ceramer coatings from castor oil or epoxidized castor oil and tetraethoxysilane

New inorganic-organic hybrids were synthesized through the reaction of castor oil (CO) or epoxidized castor oil (ECO) with tetraethoxysilane (TEOS). The mass proportions of ECO/TEOS varied from 90∶10 to 60∶40, and films of the material were thermally cured. An IR spectroscopy analysis was performed, and macro- and microscopic properties such as adhesion, hardness, swelling in toluene, microstructure (scanning electron microscopy), and T _g were investigated as a function of the proportion of their inorganic-organic precursor. Morphologic studies showed that the hybrid films were homogeneous when lower proportions of the inorganic precursors were used. Hardness and tensile strength increased with TEOS concentration, whereas swelling in toluene decreased with TEOS concentration. Good adhesion was observed throughout the hybrid series.