Interface reactions between rutile coatings and molten aluminium or AlSi7Mg0.6 alloy

Rutile coatings deposited on corundum substrates are considered as promising functional elements improving the efficiency of the filtration of oxide inclusions out of aluminium melts. This contribution describes the reactions between rutile and two kinds of the aluminium melts and discusses the consequences of these reactions for the filtration process. It was found that the contact of rutile coatings with molten aluminium leads to the formation of a corundum layer at the solid/liquid interface. The exposure of the rutile coatings to molten AlSi7Mg0.6 alloy produces an interface layer of MgTiO₃. The interface layers possess defined orientation relationship to rutile which is characteristic for locally heteroepitaxial growth. The density functional theory calculations revealed that the TiO₂/α-Al₂O₃ and TiO₂/MgTiO₃ interfaces with the orientation relationships observed experimentally have low interface energies. The mechanisms of the interface layer formation and the impact of these layers on the degradation of the rutile coatings are discussed.     

Mercury contamination in the vicinity of a derelict chlor-alkali plant. Part I: sediment and water contamination of Lake Balkyldak and the River Irtysh

A mercury-cell chlor-alkali plant operated in Pavlodar, Northern Kazakhstan, for 18 years and caused widespread contamination of the surrounding environment. Untreated wastewater from the plant was discharged to Lake Balkyldak, a shallow impounded lake without an outlet. The nearby River Irtysh was also suspected to be impacted by mercury (Hg) via the transport of contaminated groundwater. We took sediment and water samples from both aquatic systems, and also sampled soils along the shoreline of the lake and in the Irtysh flood plain. Sediments from Lake Balkyldak were found to be very heavily contaminated, with Hg concentrations in the surface layer reaching up to approximately 1500 mg kg(-1) near the wastewater outfall pipe. The contaminated lake sediments are prone to wind-driven resuspension and are acting as a strong source of Hg to the water column. Unfiltered lake water samples taken in shallow areas within 10-15 m from the shoreline contained from 0.11 microg Hg L(-1) in the less contaminated northern part of the lake to 1.39 microg L(-1) near the pollutant outfall in the south (up to 7.3 microg L(-1) on windy days). Sediments from the River Irtysh were only slightly impacted, with maximum Hg concentrations of 0.046 mg kg(-1) in the old river channel and 0.36 mg kg(-1) in floodplain oxbow lakes. In water samples from the River Irtysh, Hg was generally not detected, although trace concentrations (3 to 9 ng L(-1)) were found in some samples taken from oxbow lakes. We conclude that the river is not significantly impacted by Hg, but the highly contaminated Lake Balkyldak poses a threat and is in need of remediation. Potential remediation options for the lake are reviewed and are discussed in the context of experiences made at other Hg-contaminated sites.     

Advance measurement of gusts by laser anemometry

A coherent laser radar (or Doppler lidar) operating at a wavelength of 1.55 μm has been mounted on the nacelle of a 2.3 MW wind turbine in order to measure the wind speed in front of the blades at ranges up to 200 m. The lidar measures the component of wind speed along its beam direction but, since it rotates with the nacelle to point into the wind, this component normally differs negligibly from the actual wind speed. As an example to demonstrate the lidar's capabilities, we present samples of wind data gathered over an 18 h period in March 2003, illustrating the development of gusts that appears to be associated with the onset of solar ground heating. Wind speeds over the full period lay in the range 4-10 m s⁻¹, and the gusts were evident as a near-discontinuity in wind speed typically of order 1-2 m s⁻¹, but reaching values larger than 3 m s⁻¹. The typical timescale between gusts was of order 1 min. Improvements to this experiment are proposed that will provide more detailed information on spatial and temporal structure of such gusts.     

Mercury in the River Nura and its floodplain, Central Kazakhstan: II. Floodplain soils and riverbank silt deposits

A unique and serious case of mercury pollution has occurred in the River Nura and its floodplain in Central Kazakhstan, where mercury-rich wastewater from an acetaldehyde plant was discharged largely without treatment for several decades. In the river, the mercury became associated with millions of tonnes of power station fly ash, forming a new type of deposit known as 'technogenic silt'. During spring floods these highly contaminated silts are transported downstream and are dispersed over the floodplain, leading to widespread contamination of the land. A detailed survey of the floodplain was carried out to investigate the extent of pollution and to assess the need for remediation. Total mercury concentrations in the topsoils of the floodplain ranged from near background levels to over 100 mg/kg. Mercury concentrations in river bank deposits were found to range from a mean of 73.3 mg/kg Hg in the most contaminated section of the river to a mean of 13.4 mg/kg Hg at a distance of 70 km downstream. Concentrations were lower than corresponding concentrations in the riverbed within the first 25 km from the source of the pollution, but thereafter they were significantly higher. The results show that over the past 30-40 years a large proportion of the contaminated sediments from the river was deposited on the 70 km of banks and in the floodplain below the pollution source. Topsoils of the floodplain and silt deposits located on or close to the river banks contain an estimated 53 t and 65 t of mercury respectively, with an additional 62 t in a small natural swamp which was formerly used as a waste disposal area. The contamination is serious but relatively localized, with > 70% of the total amount of mercury in topsoils and > 90% of mercury in river bank deposits located within 25 km from the source.     

创新工农业大循环发展模式力促氨基酸产业可持续发展

循环经济倡导的是一种与环境和谐的经济发展模式,我国着力推进绿色发展、循环发展、低碳发展。我国氨基酸产业品种基本齐全、产量大、应用广泛,行业未来的发展趋势是发展生态工业。综述了氨基酸行业创新工农业大循环发展模式,包括循环经济理念、循环经济模式载体、特征与描述以及循环经济成效等方面。     

THz Direct Detector and Heterodyne Receiver Arrays in Silicon Nanoscale Technologies

Journal of Infrared, Millimeter, and Terahertz Waves - The main scope of this paper is to address various implementation aspects of THz detector arrays in the nanoscale silicon technologies...     

Insect adhesion on rough surfaces: analysis of adhesive contact of smooth and hairy pads on transparent microstructured substrates

Insect climbing footpads are able to adhere to rough surfaces, but the details of this capability are still unclear. To overcome experimental limitations of randomly rough, opaque surfaces, we fabricated transparent test substrates containing square arrays of 1.4 µm diameter pillars, with variable height (0.5 and 1.4 µm) and spacing (from 3 to 22 µm). Smooth pads of cockroaches (Nauphoeta cinerea) made partial contact (limited to the tops of the structures) for the two densest arrays of tall pillars, but full contact (touching the substrate in between pillars) for larger spacings. The transition from partial to full contact was accompanied by a sharp increase in shear forces. Tests on hairy pads of dock beetles (Gastrophysa viridula) showed that setae adhered between pillars for larger spacings, but pads were equally unable to make full contact on the densest arrays. The beetles'' shear forces similarly decreased for denser arrays, but also for short pillars and with a more gradual transition. These observations can be explained by simple contact models derived for soft uniform materials (smooth pads) or thin flat plates (hairy-pad spatulae). Our results show that microstructured substrates are powerful tools to reveal adaptations of natural adhesives for rough surfaces.     

Experimental study of the natural organic matters effect on the power generation of reverse electrodialysis

In this paper, the effect of natural organic matters (NOMs), which are typically present in river and seawater, on the power generation of reverse electrodialysis was studied. Bovine serum albumin, humic acid, and sodium alginate were used as models of NOMs. A NOM model was added to concentrated salt water, diluted salt water, and/or both of them. Power density was used to measure the resulted power generation. Fourier transform infrared spectroscopy and scanning electron microscope were used to characterize the presence of NOMs on the membrane surfaces. The effect of NOMs on the generated power density was clearly observed. This effect was influenced by the NOM's type, the NOMs concentration, and the compartment in which NOMs are added. Fourier transform infrared spectroscopy and scanning electron microscope data confirmed that NOMs are deposited on both anion and cation exchange membrane surfaces. While all NOMs added to concentrated salt water did not influence the generated power density, different power density behavior was resulted from the different NOMs added to diluted salt water, where NOMs could increase or decrease or remain the generated power density. Thus, besides NOM's type, the salt concentration is very critical to determine the effect of NOMs on the generated power density. Copyright © 2017 John Wiley & Sons, Ltd.