High-Efficiency Organic Solar Cells Based on a Low-Cost Fully Non-Fused Electron Acceptor

A series of tetrathiophene-based fully non-fused ring acceptors (4T-1, 4T-2, 4T-3, and 4T-4), which can be paired with the star donor polymer PBDB-T to fabricate highly efficient organic solar cells are developed. Tailoring the size of lateral chains can tune the solubility and packing mode of acceptor molecules in neat and blend films. It is found that the incorporation of 2-ethylhexyl chains can effectively change the compatibility with the donor polymer PBDB-T, and an encouraging power conversion efficiency of 10.15% is accomplished by 4T-3-based organic solar cells. It also presents good compatibility with the other polymer donor and an even higher power conversion efficiency (PCE) of 12.04% is achieved based on D18:4T-3 blend, which is the champion PCE for the fully non-fused acceptors. Importantly, these inexpensive tetrathiophene fully non-fused ring acceptors provide cost-effective photovoltaic performance. The results demonstrate a high photovoltaic performance from synthetically inexpensive materials could be achieved by the rational design of non-fused ring acceptor molecules.     

煤泥燃烧过程中汞的迁移行为研究

采用在线汞测试方法，以山西省低热值煤电厂中掺烧的煤泥为研究对象，利用实验室小型流化床，研究煤泥中汞的热转化行为差异及共性特征、影响煤泥热转化过程中汞迁移的关键因素，以揭示煤泥热转化过程中汞污染物的迁移机理。结果表明，同一种煤泥，相同气氛，800、900、1 000 ℃下，燃烧温度对煤泥中的汞的释放比例没有变化；相同温度，汞的释放比例为氮气>空气>氧气。3种煤泥在相同燃烧条件下，汞的释放特征相似，元素汞的释放量和释放比例差异较大。释放量与煤泥中的汞含量正相关，释放比例与煤泥中汞的赋存形态有一定关系。     

Hydrogeochemical Processes and Inverse Modeling for a Multilayer Aquifer System in the Yuaner Coal Mine,Huaibei Coalfield,China

Coal mining can dramatically change hydrogeological conditions and induce serious environmental problems. Fifty groundwater samples were collected from the main aquifers in the Yuaner coal mine (Anhui Province, China). The results show that the main hydrogeochemical processes in the mine include dissolution, precipitation, pyrite oxidation, desulfurization, and cation exchange. The Neogene porous aquifer is affected by groundwater flow conditions; its main hydrogeochemical processes are dissolution of carbonate minerals and gypsum, and cation exchange. The Permian coal measure’s fractured sandstone aquifer was confirmed to be controlled by the region’s geological structure; its main hydrogeochemical processes are desulfurization and cation exchange. The Carboniferous Taiyuan limestone aquifer was determined by both groundwater flow conditions and regional geological structure; its main hydrogeochemical processes are dissolution of carbonate minerals and gypsum, pyrite oxidation, and cation exchange. Additionally, hydrogeochemical inverse modeling of the groundwater flow path confirm the hydrochemistry results and principal component analysis.

     

Germination improves the functional properties of soybean and enhances soymilk quality

The effects of soybean variety and germination time on structural changes, antinutritional factor content, antioxidant activity of germinated soybean, and on the functional properties of soymilk were comprehensively investigated. The results showed that the antioxidant activity increased with increasing germination time. The content of antinutritional factors decreased with increasing germination time. Soybean varieties with the lowest tannin and trypsin inhibitor content were DN690 and HJ1. Lipoxygenase activity and phytic acid content showed no significant differences among soybean varieties. The content of α-helices and β-turns in soybean protein decreased with increasing germination time, while the content of β-sheets was increased. Soybean protein was progressively broken down into smaller molecular peptides during the germination process. The digestion and content of soluble protein in soymilk increased with germination. In summary, we show that germination is an effective, cheap, and green method that improves the functional properties of soybean and soymilk.     

Improving gelling properties of myofibrillar proteins incorporating with cellulose micro/nanofibres

The effects of cellulose microfibres (CMFs, Average size: 100 ± 5 μm) and cellulose nanofibres (CNFs, Average size: 60 ± 3 nm) on the properties of myofibrillar protein (MP) gels from duck breast meat were studied. The results demonstrated that CMFs and CNFs were mostly connected to MP by non-covalent bonds, the diffusion and cross-linking of MP molecules was promoted, and a denser and more complete gel network was formed. With the increases of CMFs and CNFs concentration (0–10%), the hardness was increased by 13.15% and 19.78% for CMFs10% and CNFs10% gels, respectively, and the elasticity was increased by 40% and 80%, respectively. At the same concentration (0–10%), the increase in gel hardness, viscoelasticity and immobilised water content was greater in the CNFs-MP group than in the CMFs-MP group. The CNFs-MP group had a tighter gel network, and CNFs had a better potential to improve the gelation performance of MP.     

应用智能就医模式的大型医院门诊患者需求及空间设计趋势研究

智能技术改变了大型医院门诊的就医模式,在挂号、缴费、分诊、预约检查、取药等主要就医手续智能化的背景下,患者行为需求发生改变,门诊空间的构成和布局也将随之改变.在此背景下,研究首先分析了智能就医模式的应用背景,进而梳理了门诊空间的现状问题,然后运用扎根理论的研究方法构建了患者新需求系统,最后基于患者需求探讨了门诊空间的设计趋势.研究结果将为新建和改造大型医院门诊的前期策化、设计和管理提供理论支撑.     

Crushing behavior of alumina inclusions with different porosity during hot compression

Alumina inclusions in commercial as-cast 2.25Cr1Mo0.25V aluminum deoxidized steel exhibited a feature of porous structure. In order to investigate the crushing characteristics of alumina inclusion during hot working, a series of alumina blocks with different porosity whose properties are similar to the alumina inclusions in ingots were prepared using spark plasma sintering. The crushing behavior of alumina blocks during hot compression with quasi-static load was studied. A prediction model of compressive strength of alumina inclusions considering apparent porosity was established on basis of hyperbolic sine Arrhenius equation. A novel crushing mode diagram for alumina inclusions characterized by Z parameter was proposed. The crushing mechanism of alumina inclusions under different deformation parameters was clarified by fracture characteristics. The results showed that the hot compression process of alumina presented a typical brittle fracture, the compressive strength was more sensitive to deformation conditions at lower apparent porosity as compared with the conditions of higher apparent porosity. With the increase of Z, the crushing mode of alumina inclusions gradually changed from intergranular fracture to transgranular fracture.     

Improvement of characteristics and freeze-thaw durability of solidified loess based on microbially induced carbonate precipitation

Bulletin of Engineering Geology and the Environment - Bio-cementation is currently applied to solidify sandy soils, but only few studies use it to cement loess soil particles. In this study, the...     

Simple and novel synthesis of zirconia whiskers from a phosphate flux

High quality zirconia whiskers have been successfully prepared by molten salt method, using zirconium oxychloride (ZrOCl₂·8H₂O) and sodium phosphate tribasic dodecahydrate (Na₃PO₄·12H₂O) as precursor and molten salt, respectively. The effects of types of molten salt and heat treatment temperature on the formation of zirconia whiskers were characterized by XRD, Raman, DTA-TG, FE-SEM, TEM, SAED and HR-TEM. When Na₃PO₄·12H₂O is utilized as molten salt and the heat treatment temperature is 900?°C, the as-prepared zirconia whiskers with length ranging from 4?µm to 8?µm show an average aspect ratio of 25. The obtained ZrO₂ whiskers with monoclinic structure are elongated along [010] direction and exhibit a smooth surface with no distinct defects. The XRD and Raman results reveal that the phase transformation from tetragonal zirconia to monoclinic zirconia occurs with the increased crystal size and the water quenching treatment can significantly reduce the content of sodium zirconium phosphate [Na_9–4×Zr_x(PO₄)₃] in the final product. The growth mechanism of zirconia whiskers is supposed to be a dissolution-precipitation process. Since the sodium zirconium phosphate [Na_9–4×Zr_x(PO₄)₃] effectively promotes the dissolution of zirconia in liquid molten salt, zirconia can grow into zirconia whiskers according to its anisotropy.     

Improvement of thermal,microwave and ultrasonication pretreatment on the production of antioxidant peptides from sweet potato protein via in vitro gastrointestinal digestion

Effects of thermal (boiling, steaming and autoclaving), microwave and ultrasonication pretreatments on the production of sweet potato protein hydrolysates (SPPH) through in vitro gastrointestinal digestion (GID) were investigated. All pretreatments significantly increased the degree of hydrolysis (DH), antioxidant activities and molecular weight (MW) <3 kDa peptide fractions contents of SPPH in the order of autoclaving > microwave, steaming > boiling > ultrasonication (P < 0.05). Correlation analysis between peptides content and antioxidant activity suggested that antioxidant activity of SPPH mainly attributed to MW <3 kDa peptides. Diverse peptides ranged from 487.24 to 1477.74 Da with 7–13 amino acids were identified in the MW <3 kDa peptides fraction with autoclaving pretreatment and matched sporamins A, A precursor and B sequences from LC–QTOF–MS/MS analysis. Conformational structures of nine peptides were predicted with well-known antioxidant amino acids. There is a high potential for SPPH used as a functional supplement in food system.