Determining Stability Constants Using the AKUFVE Technique

ABSTRACT

The AKUFVE techniques were developed by Rydberg and co-workers in the 1960s. The main aim was to be able to perform a series of liquid-liquid extraction data varying one or more parameters and at the same time achieve very pure phases. As such, this technique was later used for short-lived isotope studies in the SISAK system, but also as a standalone unit for a large number of thermodynamic studies of extraction systems both for fundamental understanding as well as more applied investigations. In this paper, the apparatus with modifications made over the decades is described. In addition, studies with stability constant determinations for the zirconium-water-acetylacetone system as well as lanthanide extraction using bromodecanoic acid are exemplified to demonstrate the potential use of the technique. The results shown clearly demonstrate the versatility and ability of the AKUFVE system.     

Evaluation of physiological workload assessment methods using heart rate and accelerometry for a smart wearable system

Work metabolism (WM) can be accurately estimated by oxygen consumption (VO₂), which is commonly assessed by heart rate (HR) in field studies. However, the VO₂–HR relationship is influenced by individual capacity and activity characteristics. The purpose of this study was to evaluate three models for estimating WM compared with indirect calorimetry, during simulated work activities. The techniques were: the HR-Flex model; HR branched model, combining HR with hip-worn accelerometers (ACC); and HR?+?arm-leg ACC model, combining HR with wrist- and thigh-worn ACC. Twelve participants performed five simulated work activities and three submaximal tests. The HR?+?arm-leg ACC model had the overall best performance with limits of agreement (LoA) of ?3.94 and 2.00?mL/min/kg, while the HR-Flex model had ?5.01 and 5.36?mL/min/kg and the branched model, ?6.71 and 1.52?mL/min/kg. In conclusion, the HR?+?arm-leg ACC model should, when feasible, be preferred in wearable systems for WM estimation.

Practitioner Summary: Work with high energy demand can impair employees’ health and life quality. Three models were evaluated for estimating work metabolism during simulated tasks. The model combining heart rate, wrist- and thigh-worn accelerometers showed the best accuracy. This is, when feasible, suggested for wearable systems to assess work metabolism.     

Open Sesame? Open access priorities,incentives, and policies among higher education institutions in the United Arab Emirates

Scientometrics - Higher education institutions (HEIs) have an instrumental role in the move towards Open Access (OA) by shaping the national strategies, policies, and agendas. This study sets out...     

CFD study of non-premixed swirling burners: Effect of turbulence models

This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion.     

How does increased competition on the housing market affect rents? an empirical study concerning sweden

The aim of the study is to investigate if more competition leads to lower rents on the housing market. Data about the rent level for similar apartments in 30 cities in Sweden were available. Three hypotheses were formulated: (H1) Increased ‘internal’ competition, measured by the market share of the municipal housing company (that dominates the market and is price-leader according to the Swedish system of rent regulation), leads to lower rents. (H2) Increased ‘external’ competition measured by the price level on the market for single-family owner occupied housing, leads to lower rents. (H3) Lower capital expenditure in the municipal housing company leads to lower rents. The statistical analysis showed a strong correlation between the rent level and the level of external competition, but no relation was found for the level of internal competition and the level of capital expenditure. A possible conclusion is that policies that make it easier for households to leave the rental market are important for increasing the pressure on the firms in the rental sector and reducing rents.     

Flue gas cleaning by periodic absorption

Simulations and designs are presented of conventional and periodic SO₂ absorption from exhaust gases using salt water as absorption solvent. Operating conditions resemble those of a maritime operation, involving relatively small amounts of SO₂, so the separation is in the linear region. The advantages of periodic operation, as already demonstrated for conventional distillation remain valid for absorption processes: Less tall towers, than staged towers are possible, or substantially less salt water is required for the process employing periodic cycling.     

Effects of a titanate coupling agent on the mechanical and thermo‐physical properties of talc‐reinforced polyethylene compounds

An experimental study was carried out to investigate the effects of a titanate coupling agent on the mechanical properties, moisture absorption, and thermal conductivity of talc‐filled high‐density polyethylene (HDPE). Talc (0–35 wt %) was used as reinforcement particulate filler in an HDPE matrix and samples were prepared in a micro‐compounder and an injection molding machine. Isopropyl tri(dioctyl)phosphate titanate (0.5 wt %) was used as coupling agent. Composites with and without coupling agent were evaluated for changes in mechanical and thermo‐physical properties, morphology, and void content. Addition of the titanate coupling agent most often resulted in an increase in stiffness and tensile strength. Furthermore, both the void content and the elongation at break of composites were reduced. Results also showed that the coupling agent had no effects on the thermal conductivity, thermal diffusivity, and specific heat capacity of the composites. In addition, it was observed that the coupling agent was more effective at low concentrations of filler. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40449.