Effects of extraction solvents,cooking procedures and storage conditions on the contents of ergothioneine and phenolic compounds and antioxidative capacity of the cultivated mushroom Flammulina velutipes

Edible mushrooms contain considerable amounts of the potent natural antioxidant 2‐thiol‐l ‐histidine‐betaine (l ‐ergothioneine, ESH). The objective of this study was to evaluate the effects of extraction solvents, common cooking methods and storage conditions on the ESH content, total phenols (TPs) and antioxidant capacity of the edible mushroom Flammulina velutipes fruiting body and its hot water extract that had been stored at different temperatures. Regarding cooking procedures, boiling in water resulted in the highest losses of antioxidant activity of both ESH and TPs. Most of the losses of ESH and TPs were detected in the cooking water. The ESH contents in the raw mushroom fruiting bodies significantly decreased after 8 days of refrigerated storage under both dark and fluorescent lighting conditions. However, the TP content in the raw mushroom stored under fluorescent lighting significantly increased during 10 days of refrigeration. In contrast, the ESH and TP contents as well as DPPH radical scavenging ability of the fruiting bodies remained unchanged for up to 15 days of frozen storage at ?18 °C. The same behaviour was obtained with the mushroom extract packed in plastic tubes. The correlation between DPPH radical scavenging activity and ESH contents was higher than that for TP compounds.     

Inelastic constitutive equation of plasma-sprayed ceramic thermal barrier coatings

Ceramic thermal barrier coatings (TBCs) are a very important technology for protecting the hot parts of gas turbines (GTs) from a high-temperature environment. The coating stress generated in the operation of GTs brings cracking and peeling damage to the TBCs. Thus, it is necessary to evaluate precisely such coating stress in a TBC system. We have obtained a stress-strain curve for a freestanding ceramic coat specimen peeled from a TBC coated substrate by conducting the bending test. The test results have revealed that the ceramic coating deforms nonlinearly with the applied loading. In this study, an inelastic constitutive equation for the ceramic thermal barrier coatings deposited by APS is developed. The obtained results are as follows: (1) the micromechanics-based constitutive equation was formulated with micro crack density formed at splat boundary, and (2) it was shown that the numerical results for a nonlinearly deformed beam simulated by the developed constitutive equation agreed with the experimental results obtained by cantilever bending tests.     

高桥理子押上工作室

<正>我们将原来用作工厂/办公的一栋钢结构的老建筑翻新成一位艺术家未来几十年的工作场所。为了增强建筑的性能,我们应用了防火涂料,并进行了结构加固。原有建筑的建造基于"数量重于质量"的价值观念,所以40年之后,各种裂缝和变形遍布建筑,甚至在新涂料和装饰的映衬下更加清晰可见。我们试图将这些裂缝和变形变为独特的、能够使人经历意想不到体验的空间。高桥理子是最受欢迎的艺术家之一,她的作品受到广泛认可,并向     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.     

Studies on Epoxy Resin Film Coating by the Flame Spraying Method

The authors have shown that special formulations are required to give complete covering of steel surface (with no swelling, break away, cracks, etc) with flame sprayed film coating of epoxy resin. For this purpose, there should be minimum stress in the film, and it was concluded that treatments effective for this purpose involve adding adequate filler to reduce the thermal expansion coefficient, controlling the degree of cure, holding small closed pores in the film and semi-curing immediately after spray to keep the required tensile strength.     

Thermal cis–trans conversion in thiophene oligomers

Thermal cis–trans conversion has been examined in oligothiophene single molecules encapsulated in the molecular vessels of cyclodextrin and Na-mordenite. At high temperatures, optical absorption intensities are enhanced in bithiophene, terthiophene and quinquethiophene, while the intensity of quarterthiophene is temperature independent. Optical absorption comes from uncompensated transition dipole moment due to the thermal torsion between cis and trans forms.     

Corrosion characteristics of reduced activation ferritic steel, JLF-1 (8.92Cr–2W) in molten salts Flibe and Flinak

Static corrosion tests were performed in molten salts, LiF–BeF₂ (Flibe) and LiF–NaF–KF (Flinak), at 500 °C and 600 °C for 1000 h. The purpose is to investigate the corrosion characteristics of reduced activation ferritic steels, JLF-1 (8.92Cr–2W) in the fluids. The concentration of hydrogen fluoride (HF) in the fluids was measured by slurry pH titration method before and after the exposure. The HF concentration determined the fluoridation potential. The corrosion was mainly caused by dissolution of Fe and Cr into the fluids due to fluoridation and/or electrochemical corrosion. Carbon on the surface might be dissolved into the fluids due to the corrosion, and this resulted to the decrease of carbide on the surface. The corrosion depth of the JLF-1 specimen, which was obtained from the weight losses, was 0.637 μm in Flibe at 600 °C and 6.73 μm in Flinak at 600 °C.     

A novel multi-model neuro-fuzzy-based MPPT for three-phase grid-connected photovoltaic system

This paper presents a novel methodology for Maximum Power Point Tracking (MPPT) of a grid-connected 20 kW photovoltaic (PV) system using neuro-fuzzy network. The proposed method predicts the reference PV voltage guarantying optimal power transfer between the PV generator and the main utility grid. The neuro-fuzzy network is composed of a fuzzy rule-based classifier and three multi-layered feed forwarded Artificial Neural Networks (ANN). Inputs of the network (irradiance and temperature) are classified before they are fed into the appropriated ANN for either training or estimation process while the output is the reference voltage. The main advantage of the proposed methodology, comparing to a conventional single neural network-based approach, is the distinct generalization ability regarding to the nonlinear and dynamic behavior of a PV generator. In fact, the neuro-fuzzy network is a neural network based multi-model machine learning that defines a set of local models emulating the complex and nonlinear behavior of a PV generator under a wide range of operating conditions. Simulation results under several rapid irradiance variations proved that the proposed MPPT method fulfilled the highest efficiency comparing to a conventional single neural network and the Perturb and Observe (P&O) algorithm dispositive.     

Enhancement of micro-grid performance during islanding mode using storage batteries and new fuzzy logic pitch angle controller

Power system deregulation, shortage of transmission capacities and needing to reduce green house gas have led to increase interesting in distributed generations (DGs) especially renewable sources. This study developed a complete model able to analysis and simulates in details the transient dynamic performance of the Micro-Grid (MG) during and subsequent islanding process. Wind speed fluctuations cause high fluctuations in output power of wind turbine which lead to fluctuations of frequency and voltages of the MG during the islanding mode. In this paper a new fuzzy logic pitch angle controller is proposed to smooth the output power of wind turbine to reduce MG frequency and voltage fluctuations during the islanding mode. The proposed fuzzy logic pitch controller is compared with the conventional PI pitch angle controller which usually used for wind turbine power control. Results proved the effectiveness of the proposed fuzzy controller in improvement of the MG performance. Also, this paper proposed using storage batteries technique to reduce the frequency deviation and fluctuations originated from wind power solar power fluctuations. Results indicate that the storage batteries technique is superior than fuzzy logic pitch controller in reducing frequency deviation, but with more expensive than the fuzzy controller. All models and controllers are built using Matlab® Simulink® environment.