Multiple evaluations of the removal of pollutants in road runoff by soil infiltration

Groundwater replenishment by infiltration of road runoff is expected to be a promising option for ensuring a sustainable urban water cycle. In this study, we performed a soil infiltration column test using artificial road runoff equivalent to approximately 11-12 years of rainfall to evaluate the removal of pollutants by using various chemical analyses and bioassay tests. These results indicated that soil infiltration treatment works effectively to remove most of the pollutants such as organic matter (chemical oxygen demand (CODMn) and dissolved organic carbon (DOC)), P species, polycyclic aromatic hydrocarbons (PAHs), numerous heavy metals and oestrogenic activities. Bioassay tests, including algal growth inhibition test, Microtox and mutagen formation potential (MFP) test, also revealed effective removal of toxicities by the soils. However, limited amounts of NO3, Mn, Ni, alkaline earth metals, perfluorooctane sulphonate (PFOS) and perfluorooctane sulphonamide (FOSA) were removed by the soils and they possibly reach the groundwater and cause contamination.     

Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

International mobility of researchers in robotics,computer vision and electron devices: A quantitative and comparative analysis

We investigated author information in scientific articles by approximately 7,000 researchers for a quantitative analysis of researchers’ international mobility. From top journals, we traced the movements of more than 2,200 researchers in the research domains of robotics, computer vision and electron devices. We categorized countries’ characteristics for the balance between the inflow and the outflow of researchers moving internationally. Flow patterns of international mobility confirm that the United States, China and India exhibit the greatest global flows of researchers, with Singapore and Hong Kong attracting remarkable numbers of researchers from other countries. International mobility focusing on institutions reveals that universities in Singapore receive as many foreign researchers as do research universities in the United States. Furthermore, firms and international collaborative research institutes act as alternative receivers to the universities in the electron devices research domain.     

Introduction of sulfhydryl groups and disulfide linkage to mungbean 8Sα globulin and effects on physicochemical and functional properties

Sulfhydryl groups and disulfide bond were introduced in mungbean's major storage protein, 8Sα globulin, by protein engineering to improve structural stability and functional properties. Five modified proteins or mutants (F59C, I99C, A213C, one free sulfhydryl group; I99C/A213, one disulfide bridge; F59C/I99C/A213C, one free sulfhydryl group and one disulfide linkage) were expressed in Escherichia coli at a yield similar to that of the unmodified protein or wild type (WT) in soluble form (38%). The number of introduced groups in the mutants was confirmed by Ellman analysis. Mutant and WT proteins exhibited similar elution patterns on gel filtration indicating their trimeric native conformation. Mutants had 2 to 3.8 °C higher T_m values than WT and were digested by chymotrypsin at 52–58% in 60 min but exhibited different digestion patterns. All mutants showed greater hardness of heat-induced gels than WT, especially I99C/A213C and F59C/I99C/A213C. Results indicate the improved structural stability of the modified 8Sα globulin.     

Characterization and hydrogen sorption behaviors of FeNiCr-carbon composites derived from Fe,Ni and Cr-containing polyacrylonitrile fibers prepared by electrospinning method

In order to enhance hydrogen storage capacity of carbonaceous materials through metal modification, FeNiCr-carbon composites were prepared by calcination of Fe, Ni and Cr-containing polyacrylonitrile (PAN) fibers fabricated by electrospinning method. Fe (III), Ni (II) and Cr (III) acetylacetonates (M (acac)_n) were selected as metal sources. Increase of specific surface area and formation of micropores were observed on heat decomposition of M (acac)_n particularly through introduction of steam. Maximal hydrogen content, 1.62 mass%, was obtained at 77 K under 0.8 MPa of hydrogen for a FeNiCr-carbon composite, which contained about 15.5 mass% of metals and had specific surface area of 501 m² g^?1. The hydrogen content exceeded the hydrogen physisorption limit, 2.34 mass% per 1000 m² g^?1, which was calculated on the basis of the commensurate–incommensurate transition with an enhancing factor ρ of 1.126. After hydrogenation at 653 K, no hydrogen desorption peaks were observed for FeNiCr powders derived from M (acac)_n, and one peak at 828 K for a carbonaceous sample prepared from unmodified PAN fibers. From the most promising FeNiCr-carbon composite, another peak was recorded at 752 K in addition to the peak at 828 K. The former would be originated from hydrogen on novel sorption sites additionally created on the composite formation.     

Waste management strategy focused on maintenance,storage and recycling

Waste is generated at the moment when the operation of a fusion reactor is halted and maintenance is started for periodic replacement of blanket modules and divertor. Used blanket and divertor need to be replaced shortly after the shutdown for high plant availability, as long as high surface dose rate and decay heat of the blanket and divertor can be handled. In this sense, nuclear characteristics of the blanket and divertor need to be understood for a reasonable maintenance scheme. For the purpose, neutronic calculations were carried out on the blanket and divertor using a THIDA-2 code with FENDL-2.0. For a SlimCS DEMO reactor, the calculated decay heat for each 1/12-sector was as high as 5 MW just after the shutdown and 0.3 MW one month later. For the maintenance, a cooled shielding structure (CSS) was proposed to remove the decay heat and to shield gamma-rays from the sector. When maintenance is done one month after the shutdown, the sector temperature is maintained to be 550 °C or lower with the cooling by the CSS of 50 °C. In order to avoid tritium release from the sector during the maintenance, a cask should be used to transport the sector. For efficient use of resources, breeding and neutron multiplying materials should be reused or recycled. A possible strategy for reuse or recycle is also presented.     

Asymmetry in object substitution masking occurs relative to the direction of spatial attention shift.

A sparse mask that persists beyond the duration of a target can reduce its visibility, a phenomenon called object substitution masking. Y. Jiang and M. M. Chun (2001a) found an asymmetric pattern of substitution masking such that a mask on the peripheral side of the target caused stronger substitution masking than on the central side. Assuming spatial attention was focused toward the target, the peripheral and central masks were located in the same and opposite direction of an attentional path with reference to the target in their study. We hypothesized that this asymmetric mask configuration relative to the attentional shift contributes to asymmetric substitution masking. To test this hypothesis, we conducted four experiments among which the presence or absence of the center–periphery relationship and the presence or absence of the asymmetric mask configuration were manipulated independently and orthogonally. The results suggest that asymmetric substitution masking occurs relative to the direction of spatial attention irrespective of the central–peripheral relation. We propose that the asymmetry in substitution masking might be explained by attentional momentum associated with orienting toward the target. (PsycINFO Database Record (c) 2010 APA, all rights reserved)