Direct writing of textured ceramics using anisotropic nozzles

Direct writing is a unique means to align anisotropic particles for the fabrication of textured ceramics by templated grain growth (TGG). We show that alignment of tabular barium titanate (BT) template particles (20–40 μm width and 0.5–2 μm thickness) in a PIN-PMN-PT matrix powder (d₅₀ = 280 nm) is significantly improved during direct writing using anisotropic nozzles at high printing rates. The particle orientation distribution in as-printed filaments, and the texture orientation distribution in sintered ceramic filaments are shown to directly correlate with COMSOL Multiphysics-predicted torque distributions for direct writing with aspect ratio 2, 3 and 5 oval nozzles. Electromechanical strain properties of the textured piezoelectric ceramics significantly improved relative to random ceramics when printed with anisotropic nozzles. Simulations of aspect ratio 20 nozzles and nozzles with interior baffles demonstrate significantly increased torque and near elimination of constant shear stress cores (i.e. plug flow).     

Processing and electromechanical properties of high-coercive field ZnO-doped PIN-PZN-PT ceramics

This study explores sintering and piezoelectricity of ZnO-doped perovskite Pb(In_1/2Nb_1/2)O₃-Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PIN-PZN-PT) ceramics. The enhanced densification of ZnO-doped PIN-PZN-PT is attributed to the formation of oxygen vacancies by the incorporation of Zn²⁺ into the perovskite B-site and increased rate of bulk diffusion relative to undoped PIN-PZN-PT. Incorporation of Zn²⁺ into the perovskite lattice increased the tetragonal character of PIN-PZN-PT as demonstrated by tetragonal peak splitting and increased Curie temperature. Sintering in flowing oxygen reduced the solubility of Zn²⁺ in the perovskite lattice and resulted in rhombohedral PIN-PZN-PT. Sintering in oxygen prevented secondary phase formation which resulted in a high-piezoelectric coefficient (d₃₃ – 550 pC/N), high-coercive field (E_c – 13 kV/cm), and high-rhombohedral to tetragonal phase transition temperature (T_r-t – 165°C). We conclude that ZnO-doped PIN-PZN-PT ceramics are excellent candidates for high-power transducer applications.     

Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

Statistical study of the influence of building architectural properties on scattered fields in urban environment

Statistical studies on the reflection coefficient of concrete–glass building facades are conducted using a fast and an accurate method based on the Green’s functions. The variation of different architectural parameters, such as concrete permitting and distribution, size and type of windows, are studied. The influence of selected parameters on the total reflection coefficient of the building is quantified for different incidence and observation angles as well as in different diffraction zones.     

Direct-writing of PbS nanoparticles inside transparent porous silica monoliths using pulsed femtosecond laser irradiation

Pulsed femtosecond laser irradiation at low repetition rate, without any annealing, has been used to localize the growth of PbS nanoparticles, for the first time, inside a transparent porous silica matrix prepared by a sol-gel route. Before the irradiation, the porous silica host has been soaked within a solution containing PbS precursors. The effect of the incident laser power on the particle size was studied. X-ray diffraction was used to identify the PbS crystallites inside the irradiated areas and to estimate the average particle size. The localized laser irradiation led to PbS crystallite size ranging between 4 and 8 nm, depending on the incident femtosecond laser power. The optical properties of the obtained PbS-silica nanocomposites have been investigated using absorption and photoluminescence spectroscopies. Finally, the stability of PbS nanoparticles embedded inside the host matrices has been followed as a function of time, and it has been shown that this stability depends on the nanoparticle mean size.     

A Highly Active and Selective Manganese Oxide Promoted Cobalt-on-Silica Fischer�CTropsch Catalyst

A highly active and selective manganese oxide-promoted silica-supported cobalt catalyst for the Fischer?CTropsch reaction is reported. Co/MnO/SiO₂ catalysts were prepared via impregnation of a cobalt nitrate and manganese nitrate precursor, followed by drying and calcination in an NO/He flow. The catalysts were studied with STEM?CEELS, infrared spectroscopy measurements of adsorbed CO and Steady-State Isotopic Transient Kinetic Analysis experiments. Based on those experiments, a relation between C₅₊-selectivity and surface-coverages of CH _x -intermediates on cobalt was found.     

Magnetization Reversal in CsNiIICrIII(CN)6 Coordination Nanoparticles: Unravelling Surface Anisotropy and Dipolar Interaction Effects

CsNiCr(CN)₆ coordination nanoparticles with sizes ranging from 6 to 30 nm are highly diluted in an organic polymer matrix. Their static and dynamic magnetic behaviour allows unravelling of surface anisotropy and interparticle dipolar interaction effects. The single magnetic domain critical size is thus evaluated to be around 22 nm with a blocking temperature of 21 K (at ν = 1 Hz) and an effective energy barrier for the reversal of the magnetization of 426 K.