Changes of bioactive components in berry seed oils during supercritical CO2 extraction

The objective of the work was to elucidate the chemical composition of fractions of oil extracts obtained during the supercritical extraction on a semi‐industrial scale from strawberry (Fragaria x ananassa Duch.), chokeberry [Aronia melanocarpa (Michx.)], and raspberry (Rubus idaeus L.) seeds from industrial press cake. The oil extracts differed in terms of their content of bioactive components: carotenoids, tocopherols, chlorophylls, and fatty acids. Raspberry seed oil was the richest source of tocopherols (620.1–2166.7 mg kg^?1) and α‐linolenic acid (above 37%). Chokeberry seed oil had the highest content of linoleic acid (above 70%), and α‐tocopherol (166.0–1104.8 mg kg^?1). Strawberry oil was characterized by the highest content of chlorophylls and α‐linolenic acid (above 30%). It was showed that the oil fraction collected at the beginning of extraction is characterized by a high acid value, which requires purification steps to be used for food purposes.

Practical applications

Strawberry, raspberry, and chokeberry by‐products left over from the production of concentrated juice are a valuable source of oils rich in n‐3 and n‐6 polyunsaturated fatty acids, tocopherols, and carotenoids. The research showed that the fractionation of extracts in the course of supercritical extraction leads to oils with varying amounts of different bioactive compounds, and thus to products with potentially wide applications. Seeds oils have high potential utility as a source of unconventional oil for cosmetic and pharmaceutical sectors and biodiesel. Their targeted utilization may be exploited for economic, environmental and health benefits.     

A Comparative Study of Mechanical Properties,Thermal Conductivity,Residual Stresses,and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder Metallurgy

Squeeze casting and powder metallurgy techniques were employed to fabricate AlSi12/Al₂O₃ composites, which are lightweight structural materials with potential applications in the automotive industry. The impact of the processing route on the material properties was studied. Comparative analyses were conducted for the Vickers hardness, flexural strength, fracture toughness, thermal conductivity, thermal residual stresses, and frictional wear. Our results show that the squeeze cast composite exhibits superior properties to those obtained using powder metallurgy.

     

Correction to: A Comparative Study of Mechanical Properties,Thermal Conductivity,Residual Stresses,and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder Metallurgy

Metallurgical and Materials Transactions A -     

Elaboration of small‐diameter vascular prostheses—Selection of appropriate sterilisation method

The aim of study is the elaboration of semi‐biodegradable, multilayered tubular structures as substitutes for the reconstruction of small diameter vascular prostheses (<6 mm). The inert external layer of the prostheses will be fabricated via the melt electrospinning of poly (l ‐lactide‐co‐glycolide) (PLGA). The middle layer will be constructed from polypropylene (PP); the first prototype will be produced via melt electrospinning and the second using the melt blowing technique. The general aim of this stage of the research is the selection of a sterilisation technique that is appropriate for semi‐biodegradable, multilayered tubular structures. For this purpose, single tubular structures created via the melt electrospinning of PLGA or PP and melt blown tubular structures of PP were elaborated. The influence of steam, ethylene‐oxide (EO), and radiation sterilisation techniques on the elaborated microstructure of tubular structures was analyzed during this study. The effect of each sterilisation technique was evaluated using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy‐dispersive X‐ray spectroscopy analysis (SEM/EDS). The changes in average molecular weight (M_w) and crystallinity index (CI) of the PLGA tubular structures after EO and steam sterilisation were evaluated. The EO and steam sterilisation resulted in the complete destruction of PLGA tubular structures. Only the radiation sterilisation (accelerated electrons) did not influence on PLGA tubular structures morphology as well as thermal and chemical properties. FTIR and SEM/EDS analysis indicated that no changes in the chemical properties of PP tubular structures after each sterilisation occurred. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40812.     

Structure and Composition of Au–Cu and Pd–Cu Bimetallic Catalysts Affecting Acetylene Reactivity

Au–Cu and Pd–Cu bimetallic model catalysts were prepared on native SiO₂/Si(100) substrate under ultra high vacuum (UHV) by employing buffer layer assisted growth procedure with amorphous solid water as the buffer material. The effect of the bimetallic nanoclusters (NCs) surface composition and morphology on their chemical reactivity has been studied with acetylene decomposition and conversion to ethylene and benzene as the chemical probe. It was found that among the Au–Cu NCs compositions, Au_0.5Cu₃ NCs revealed outstanding catalytic selectivity towards ethylene formation. These NCs were further characterized by employing TEM, XPS and HAADF-STEM coupled EDX analysis. With CO molecule as a probe, CO temperature programmed desorption has been used to investigate the distribution of gold on the top-most surface of the supported clusters. Surface segregation at high relative elemental fraction of gold leads to a decreased activity of the Au–Cu NCs towards ethylene formation. In contrast to the Au–Cu NCs, the Pd–Cu bimetallic system reveals reduced sensitivity to the relative elemental composition with respect to selectivity of the acetylene transformation toward ethylene formation. On the other hand, remarkable activity towards benzene formation has been observed at elemental composition of Cu₃Pd, at comparable rates to those for ethylene formation on clean Pd NCs.     

Enzymatic and molecular characteristics of Geotrichum candidum strains as a starter culture for malting

Geotrichum candidum yeasts are proposed as a starter culture during malting. They have a double positive effect on the process. They eliminate the fungal pathogenic microflora and improve the technological properties of the finished product, malt. Among published research little or no information can be found considering the biosynthesis of hydrolytic enzymes. Most of the data is related to the production of lipases, proteases and cellulases. This paper examines the enzymology of a number of G. candidum strains. The main focus within the evaluation process was placed on whole cell barley grain cultivation. Hydrolase, which is present in cell wall degradation, was found at a satisfactory level. All tested strains produced both β‐1,3‐glucanases and β‐1,4‐glucanases capable of hydrolysing barley β‐glucan and reducing the amount of this polysaccharide in the wort. Molecular analysis of the tested strains with the use of restriction fragment length polymorphism–polymerase chain reaction and randomly amplified polymorphic DNA confirmed not only the species affiliation, but also the genetic similarity between the tested strains. Copyright © 2014 The Institute of Brewing & Distilling