Synthesis and thermal stability of (Co,Ni)O solid solutions

(Co,Ni)O solid solutions are considered as promising protective materials of O₂-evolving anodes for Al production. In this context, two solid-state synthesis methods, namely high-energy ball milling (HEBM) and calcination, have been evaluated for the synthesis of (Co,Ni₎O solid solutions. In all cases, Co_xNi_1−xO solid solutions can be formed over the whole composition range. However, undesired WC contaminant is observed using the HEBM method due to the erosion of the milling tools. Their thermal stability in air has been analyzed by thermogravimetric analyzes (TGA) complemented by X-ray diffraction (XRD) analyses. It is shown that Co_xNi_1−xO solid solutions are stable at 1000°C over the whole composition range whereas they are only stable for x ≤ 46 and x ≤ 22 at 800°C and 700°C, respectively. For higher Co contents, the formation of Co₃O₄ is observed. This is a relevant information for their future use for Al production, which can be done at different temperatures (~700-1000°C) depending of the electrolyte composition.     

Friction coefficients in cold forging: A global perspective

Worldwide, at least twenty different tribological tests have been proposed for the empirical determination of friction coefficients in cold forging processes. Due to the varying test setups, means of measurement, and level of abstraction, the comparability of the outcomes is, however, disputable. Within this work, six established test principles are compared using identical tribological systems. Large differences between the empirically determined friction coefficients are observed but can be explained under consideration of the respective tribological loads. Additional investigations of an extrusion process reveal that friction models also have to take into account the varying local thickness of the lubricant film.     

Nonlinear active noise control for headrest using virtual microphone control

In this paper, a feed-forward nonlinear active noise control algorithm is developed using the Filtered-S LMS (FSLMS) algorithm and virtual microphone control for an active headrest application. Virtual microphone control is implemented to attenuate noise at the ears of the headrest occupant using the physical microphones placed at remote locations. The proposed nonlinear virtual microphone control algorithm is verified in real-time in a headrest. Different nonlinear noise processes are studied and it is shown that in all cases, the FSLMS algorithm outperforms the FXLMS algorithm in controlling nonlinear primary noise at a virtual location.     

Synthesis and Photopolymerization of Tween 20 Methacrylate/N-vinyl-2-Pyrrolidone Blends

Poly(oxyethylene 20 sorbitan) monolaurate (Tween® 20) methacrylates were synthesized by coupling methacryloyl chloride (MeOCl) to Tween 20 in the presence of 4-(N,N-dimethylamino) pyridine, using THF as a solvent, in order to investigate their suitability as precursors for photopolymerizable hydrogels in tissue engineering applications. The degree of substitution could be controlled by adjusting the molar ratio of MeOCl and Tween 20, giving three different monomers: Tween 20 monomethacrylate, Tween 20 dimethacrylate and Tween 20 trimethacrylate. Combined ¹ H NMR and MALDI-TOF MS confirmed these monomers to be of high purity and to have polydispersities less than 1.3. It was shown that aqueous solutions of the monomers were photoactive, all the methacrylate groups reacting within 30 minutes exposure to a UV light intensity of 145 mW/cm². Aqueous Tween 20 trimethacrylate was then combined with N-vinyl-2-pyrrolidone (NVP), giving tough copolymer hydrogels on photopolymerization, whose swelling ratios and swelling rates could be tuned by varying the Tween 20 trimethacrylate content. The use of a flexible spacer with a multifunctional monomer gives a permanent three-dimensional network, whilst maintaining degrees of swelling of between 60 and 85%, with potential for a wide range of biological and non-biological applications.     

Temperature Measurement Challenges and Limitations for In-Flight Particles in Suspension Plasma Spraying

Suspension plasma spraying (SPS) acquires a significant interest from the industry. The deposited coatings using this technique were proved to have unique microstructural features compared to those built by conventional plasma spraying techniques. In order to optimize this process, in-flight particle diagnostics is considered a very useful tool that helps to control various spraying parameters and permits better coating reproducibility. In that context, the temperature of in-flight particles is one of the most important key elements that helps to optimize and control the SPS process. However, the limitations and challenges associated with this process have a significant effect on the accuracy of two-color pyrometric techniques used to measure the in-flight particle temperature. In this work, the influence of several nonthermal radiation sources on the particle temperature measurement is studied. The plasma radiation scattered by in-flight particles was found to have no significant influence on temperature measurement. Moreover, the detection of the two-color signals at two different locations was found to induce a significant error on temperature measurement. Finally, the plasma radiation surrounding the in-flight particles was identified as the main source of error on the temperature measurement of in-flight particles.     

Network virtualization as an integrated solution for emergency communication

In this paper the Virtual Private Ad Hoc Networking (VPAN) platform is introduced as an integrated networking solution for many applications that require secure transparent continuous connectivity using heterogeneous devices and network technologies. This is done by creating a virtual logical self-organizing network on top of existing network technologies reducing complexity and maintaining session continuity right from the start. One of the most interesting applications relies in the field of emergency communication with its specific needs which will be discussed in this paper and matched in detail against the architecture and features of the VPAN platform. The concept and dynamics are demonstrated and evaluated with measurements done on real hardware.     

Experimental and theoretical study of the adsorption of pure molecules and binary systems containing methane, carbon monoxide, carbon dioxide and nitrogen. Application to the syngas generation

This study takes place in the context of the use of a Synthesis Gas in Gas To Liquid process, liquid hydrocarbon production by conversion based on Fischer–Tropsch synthesis. Our aim is the process improvement by a selective recycling of the tail gas. So, we measure pure component isotherms for four gases (CO₂, CH₄, CO, N₂) of the tail gas until 2000 kPa and binary mixture (CO₂–CH₄; CO₂–N₂; CH₄–N₂) equilibria at 303.15 K and 400 and 950 kPa onto a ZSM-5 zeolite. We also predict the binary mixture equilibria by the Ideal Adsorbed Solution Theory (IAST) and the Vacancy Solution Model (VSM, Flory–Huggins and Wilson forms) and we obtain very good results. So not only binary mixture equilibria but also ternary and quaternary mixture adsorption can be predicted. With these data (experimental and simulated), we can conclude that the CO₂ is the most adsorbed component while N₂ is the least one. These two components can be separated from CH₄ and CO which are sent in the Synthesis Gas production step.     

AlGaN/GaN MISHEMT with hBN as gate dielectric

Metal/Insulator/Semiconductor AlGaN/GaN High Electron Mobility Transistors (MISHEMTs) on sapphire substrate were fabricated with hexagonal Boron Nitride (hBN) thin film as gate dielectric. The hBN thin film, deposited by MW-PECVD, is an insulator permitting to obtain a low leakage current gate, an interface state density as low as 5 × 1011 cm^? 2 eV^? 1 for hBN/AlGaN interface and low roughness surface less than 0.4 nm. HBN thin film is deposited to have optical c-axis oriented weakly tilted to the perpendicular at the AlGaN barrier surface and to increase the lateral electrical resistivity. DC measurement on MISHEMT exhibits promising performance for microwave power devices associated to a good gate charge control in enhancement mode.