VLC Enabled Hybrid Wireless Network for B5G/6G Communications

Wireless Personal Communications - In the present scenario, there is a boom in the demand of the users to achieve increased capacity, high data, low latency, and high-performance rates. 5G New...     

Identification,Phylogeny, and Comparative Expression of the Lipoxygenase Gene Family of the Aquatic Duckweed,Spirodela polyrhiza,during Growth and in Response to Methyl Jasmonate and Salt

Lipoxygenases (LOXs) (EC 1.13.11.12) catalyze the oxygenation of fatty acids and produce oxylipins, including the plant hormone jasmonic acid (JA) and its methyl ester, methyl jasmonate (MeJA). Little information is available about the LOX gene family in aquatic plants. We identified a novel LOX gene family comprising nine LOX genes in the aquatic plant Spirodela polyrhiza (greater duckweed). The reduced anatomy of S. polyrhiza did not lead to a reduction in LOX family genes. The 13-LOX subfamily, with seven genes, predominates, while the 9-LOX subfamily is reduced to two genes, an opposite trend from known LOX families of other plant species. As the 13-LOX subfamily is associated with the synthesis of JA/MeJA, its predominance in the Spirodela genome raises the possibility of a higher requirement for the hormone in the aquatic plant. JA-/MeJA-based feedback regulation during culture aging as well as the induction of LOX gene family members within 6 h of salt exposure are demonstrated.     

Facile synthesis,characterization, and ab-initio DFT simulations of energy efficient NN′ dialkyl 1,4 benzene dicarboxamide monomers recovered from PET bottle waste

Aminolytic chemical recycling is performed for obtaining NN′ diethyl 1,4 benzene dicarboxamide, NN′ dibutyl 1,4 benzene dicarboxamide, and NN′ dihexyl 1,4 benzene dicarboxamide from Polyethylene terephthalate bottle waste. The compounds were characterized through Fourier transform Infrared spectroscopy, Raman spectroscopy, UV–Visible spectroscopy, ¹H NMR, ¹³C NMR, mass spectrometry, and elemental analysis. Thermal properties were also analyzed with the help of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Density Functional Theory (DFT) study has been performed at GGA-BLYP (Becke's and Lee–Yang–Parr) functional using SZ basis set to investigate the vibrational frequencies and physical parameters. Experimental vibrational frequencies were found in good accord with the experimental values. Calorific values of the products have been determined using bomb calorimeter as per standard ASTM D240. The values have been correlated with increment of methylene units from NN′ diethyl BdCA to NN′ dihexyl BdCA using standard molar enthalpies of carbon and hydrogen. SEM and EDX analysis of the char residues after combustion has also been carried out to insight the effect of N-alkyl chain length on calorific values. The calorific values of the recovered compounds are comparable to commercial solid fuels and the compounds may find potential applications in aerospace industry.     

Numerical and sensitivity analysis of MHD bioconvective slip flow of nanomaterial with binary chemical reaction and Newtonian heating

The impact of Stefan blowing on the MHD bioconvective slip flow of a nanofluid towards a sheet is explored using numerical and statistical tools. The governing partial differential equations are nondimensionalized and converted to similarity equations using apposite transformations. These transformed equations are solved using the Runge–Kutta–Fehlberg method with the shooting technique. Graphical visualizations are used to scrutinize the effect of the controlling parameters on the flow profiles, skin friction coefficient, local Nusselt, and Sherwood number. Moreover, the sensitivities of the reduced Sherwood and Nusselt number to the input variables of interest are explored by adopting the response surface methodology. The outcomes of the limiting cases are emphatically in corroboration with the outcomes from preceding research. It is found that the heat transfer rate has a positive sensitivity towards the haphazard motion of the nanoparticles and a negative sensitivity towards the thermomigration. The thermal field is enhanced by the Stefan blowing aspect. Moreover, the fluid velocity can be controlled by the applied magnetic field.     

Experimental investigation of dryout phenomena under oscillatory flow conditions

In water-cooled nuclear reactors, the maximum power which can be extracted from the core is limited by critical heat flux (CHF). CHF in the high-quality region is known as dryout. In advanced nuclear reactors, the coolant flow occurs solely by virtue of natural circulation; however, instabilities may occur during off-normal operations. This may lead to premature dryout due to lower coolant flow rates seen by the heater during such oscillations. This paper describes the experimental investigation on the effect of flow oscillations on the CHF with the time period of 120 s, which is observed typically in the large-scale natural circulation system. Based on observations made with respect to temperature transient, the continuous dryout is preceded by the transient dryout for higher flow oscillations. But as flow fluctuation decreases, the transient dryout phenomenon is found to disappear. The applicability of the look-up table to predict CHF under oscillatory flow conditions using suitable correction factors (CFs) for premature dryout has been evaluated. CFs for the CHF under oscillations suggested by previous authors have been compared. The maximum possible degradation in CHF value suggested by previous authors has been found to agree with the present experimental data. Percentage fluctuation in heat transfer coefficient (HTC) at fully developed annular flow conditions has been evaluated, and it is found that fluctuation in HTC is in phase with the fluctuation in flow.     

Rheological Behavior of Polycarbosilane Part II: Effect of Heterometal (Al) Content and Nature of Bonding with Si of Polycarbosilane

A few aluminum containing polycarbosilanes named AlOR-PCS and Alac-PCS have been synthesized by the reaction of aluminum isopropoxide (AlOR) and aluminum acetylacetonate (Alac) with polycarbosilane (PCS), respectively. These materials were characterized by Fourier Transform Spectroscopy (FTIR), Thermo gravimetric Analysis (TGA) and Gel Permeation Chromatography (GPC). The rheological properties of these compounds were studied with respect to time, temperature and atmosphere (inert & air). It has been observed that the increase in metal content enhances the crosslinking of the PCS chains. Under similar conditions, the crosslinking of AlOR-PCS derivatives was found slower than Alac-PCS. GPC analysis of the samples showed the increase in molecular weight of these compounds compared to virgin PCS. TGA showed improved ceramic yield with increasing metal content. Alac-PCS gave higher ceramic yield than AlOR-PCS for similar molar ratios of metal complexes.     

Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties

Graphene-reinforced aluminum (Gr-Al) matrix nanocomposites (NCs) have attracted strong interest from both research and industry in high-performance weight-sensitive applications. Due to the vastly different bonding characteristics of the Al matrix (metallic) and graphene (in-plane covalent?+?inter-plane van der Waals), the graphene phase has a general tendency to agglomerate and phase separate in the metal matrix, which is detrimental for the mechanical and chemical properties of the composite. Thus, synthesis of Gr-Al NCs is extremely challenging. This review summarizes the different methods available to synthesize Gr-Al NCs and the resulting properties achieved in these NCs. Understanding the effect of processing parameters on the realized properties opens up the possibility of tailoring the synthesis methods to achieve the desired properties for a given application.     

Tract‐tracing study of the extrabulbar Olfactory projections in the brain of some teleosts

The extrabulbar olfactory projections (EBOP) is a collection of nerve fibers that originate from primary olfactory receptor neurons. These fibers penetrate into the brain, bypassing the olfactory bulbs (OBs). While the presence of an EBOP has been well established in teleosts, here we morphologically characterize the EBOP structure in four species each with a different morphological relationship of OB with the ventral telencephalic area. Tract‐tracing methods (carbocyanine DiI/DIA and biocytin) were used. FMRFamide immunoreactive nervus terminalis (NT) components were also visualized to define any neuroanatomical relationship between the NT and EBOP. Unilateral DiI/DiA application to the olfactory chamber stained the entire olfactory epithelium, olfactory nerve fibers, and ipsilateral olfactory bulb. Labeled primary olfactory fibers running ventromedially as extrabulbar primary olfactory projections reached various regions of the secondary prosencephalon. Only in Moenkhausia sanctaefilomenae (no olfactory peduncle) did lipophilic tracer‐labeled fibers reach the ipsilateral mesencephalon. The combination of tracing techniques and FMRFamide immunohistochemistry revealed a substantial overlap of the label along the olfactory pathways as well as in the anterior secondary prosencephalon. However, FMRFamide immunoreactivity was never colocalized in the same cellular or fiber component as visualized using tracer molecules. Our results showed a certain uniformity in the neuroanatomy and extension of EBOP in all four species, independent of the pedunculate feature of the OBs. The present study also provided additional evidence to support the view that EBOP and FMRFamide immunoreactive components of the NT are separate anatomical entities. Microsc. Res. Tech. 78:268–276, 2015. © 2015 Wiley Periodicals, Inc.