Inhibition of atmospheric corrosion of mild steel by sodium benzoate treatment

The objective of this study was to evaluate the effectiveness of sodium benzoate as an inhibitor to slow down or prevent atmospheric corrosion/discoloration of the local mild steel during storage in the Arabian Gulf region. Test specimens were prepared from locally produced reinforcing steel products. The inhibitor solution was applied on steel specimens at a concentration of 100 mM for 1 day at room temperature. Wooden exposure racks were used to hold as-received and inhibitor-treated specimens during atmospheric exposure for different periods. Corrosion was evaluated through weight loss determination and electrochemical technique. As expected, the Arabian Gulf atmosphere was corrosive on the as-received local mild steel. On the other hand, treatment of steel with sodium benzoate lowered its corrosion rate during initial days of its exposure to atmosphere. However, atmospheric corrosion inhibition performance of sodium benzoate deteriorated with exposure time after 30 or more days of atmospheric exposure, and the corrosion rates of sodium benzoate-treated specimens reached that of the unprotected specimens at the end of 90 days of atmospheric exposure.     

HiSQL: A Front-end Query System for Historical Relational Databases

The paper describes a prototype system called HiSQL (Historical SQL) which extends the functionality of SQL in manipulating historical data, by providing functions for spatial and temporal processing. Conceptually the paper is divided into three parts: the first part deals with the design and architecture of the system; the second part introduces a case study (the defters); and the third part describes specific functions for spatial and temporal processing of serial documents. The paper concludes with a comparison between HiSQL and SQL and suggestions for further work. This revised version was published online in August 2006 with corrections to the Cover Date.     

Exact solution of elasto-plastic stresses in a metal-matrix composite beam of arbitrary orientation subjected to transverse loads

An analytical elasto-plastic stress analysis is presented for a metal-matrix composite beam of arbitrary orientation subjected to a single transverse force applied to the free end of the beam and a uniformly distributed load. The material is assumed to be perfectly plastic in the elasto-plastic solution. A composite consisting of stainless-steel-reinforced aluminum was produced for this work. Sample problems are given for various orientation angles. Elastic, elastoplastic and residual normal and shear stresses are calculated. The location of the elasto-plastic boundary of the beam is obtained according to the x coordinates of the beam.     

Maximization of total surface area of Pt-SnO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst by the Taguchi method

The maximization of the total surface area of Pt-SnO₂/Al₂O₃ catalyst was studied by using the Taguchi method of experimental design. The catalysts were prepared by sol-gel method. The effects of HNO₃, H₂O and aluminum nitrate concentrations and the stirring rate on the total surface area were studied at three levels of each. L₉ orthogonal array leading nine experiments was used in the experimental design. The parameter levels that give maximum total surface area were determined and experimentally verified. In the range of conditions studied it was found that, medium levels of HNO₃ and H₂O concentration and lower levels of aluminum nitrate concentration and stirring rate maximize the total surface area.     

Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits

Airborne sand particles that deposit on thermal barrier coatings (TBCs) in gas-turbine engines melt and form calcium–magnesium–aluminosilicate (CMAS) glass, which attacks the TBCs. A new approach for mitigating CMAS attack on TBCs is presented, where up to 20 mol.% Al₂O₃ and 5 mol.% TiO₂ in the form of a solid solution is incorporated into Y₂O₃-stabilized ZrO₂ (YSZ) TBCs. The fabrication of such TBCs with engineered chemistries is made possible by the solution-precursor plasma spray (SPPS) process, which is uniquely suited for depositing coatings of metastable ceramics with extended solid-solubilities. Here, the TBC serves as a reservoir of Al and Ti solutes, which are incorporated into the molten CMAS glass that is in contact with the TBC. This results in the crystallization of the CMAS glass and the attendant arrest of the penetrating CMAS front. This approach could also be used to mitigate attack by other types of foreign deposits (salt, ash, and contaminants) on TBCs.     

Experiments on the transition from the steady to the oscillatory marangoni convection of a floating-zone under various cold wall temperatures and various ambient air temperature effects

The transition from the steady to the oscillatory Marangoni convection of a floating-zone under various cold wall temperatures and various ambient air temperature effects have been investigated experimentally by heating the sample from above (opposite direction of Marangoni convection and buoyant forces). The heat transfer takes place mainly through conduction as well as the natural convection of the air around the cylindrical liquid bridge. The ambient airflow in the present work is varied by varying the cold wall temperature and ambient air temperature. In this study, the transition from the steady to the oscillatory Marangoni convection flow of a high Prandtl number fluid in a floating half-zone is visualized by means of the already proven method of the “light-cut-technique”. The test fluid zone is held in ambient air at +4 °C, +10 °C, +16 °C, +23 °C, and +28 °C. The onset of oscillations, the oscillation level, and oscillation pattern are investigated under various conditions. It is found that the critical temperature difference (ΔT_Cr) varies substantially when the cold wall temperature and the ambient air temperature are varied.