A comparative study on the effect of VUV radiation in plasma SiOx-coated polyimide and polypropylene films

Wettability of polyimide (PI) and polypropylene (PP) films have been improved using SiO_x-like thin layers deposited from a mixture of hexamethyldisiloxane (HMDSO) and oxygen in a microwave distributed electron cyclotron resonance plasma reactor. The films wettability evolution behaviors were evaluated through the results of contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The plasma depositions of SiO_x thin layers in presence of VUV radiation induce a contact angle decrease to about 7° and 35° for PI and PP films, respectively. XPS data showed that such difference in wettability is attributed to the increase of hydrophilic group's proportion at the surface of coated PI films due to VUV irradiation. AFM images showed that the PI surface topography remains relatively smooth when coated in presence of VUV radiation. However, in the case of PP films, AFM images revealed the growth of irregular structure due to a substrate etching effect supported by VUV radiation. For polymers coated without VUV irradiation, the deconvolution of the C1s peaks showed a significant decrease of CO bonds for both PI and PP substrates.     

基于动态贝叶斯网络的语音识别及音素切分研究*

研究了一种基于动态贝叶斯网络(dynamic bayesian networks, DBN)的语音识别建模方法,利用GMTK(graphical model tool kits)工具构建音素级音频流DBN语音训练和识别模型,同时与传统的基于隐马尔可夫的语音识别结果进行比较,并给出词与音素的切分结果.实验表明,在各种信噪比测试条件下,基于DBN的语音识别结果与基于HMM的语音识别结果相当,并表现出一定的抗噪性,音素的切分结果也比较准确.     

Speech driven photo realistic facial animation based on an articulatory DBN model and AAM features

This paper presents a photo realistic facial animation synthesis approach based on an audio visual articulatory dynamic Bayesian network model (AF_AVDBN), in which the maximum asynchronies between the articulatory features, such as lips, tongue and glottis/velum, can be controlled. Perceptual Linear Prediction (PLP) features from audio speech, as well as active appearance model (AAM) features from face images of an audio visual continuous speech database, are adopted to train the AF_AVDBN model parameters. Based on the trained model, given an input audio speech, the optimal AAM visual features are estimated via a maximum likelihood estimation (MLE) criterion, which are then used to construct face images for the animation. In our experiments, facial animations are synthesized for 20 continuous audio speech sentences, using the proposed AF_AVDBN model, as well as the state-of-art methods, being the audio visual state synchronous DBN model (SS_DBN) implementing a multi-stream Hidden Markov Model, and the state asynchronous DBN model (SA_DBN). Objective evaluations on the learned AAM features show that much more accurate visual features can be learned from the AF_AVDBN model. Subjective evaluations show that the synthesized facial animations using AF_AVDBN are better than those using the state based SA_DBN and SS_DBN models, in the overall naturalness and matching accuracy of the mouth movements to the speech content.     

Accelerating SPARQL queries by exploiting hash-based locality and adaptive partitioning

State-of-the-art distributed RDF systems partition data across multiple computer nodes (workers). Some systems perform cheap hash partitioning, which may result in expensive query evaluation. Others try to minimize inter-node communication, which requires an expensive data preprocessing phase, leading to a high startup cost. Apriori knowledge of the query workload has also been used to create partitions, which, however, are static and do not adapt to workload changes. In this paper, we propose AdPart, a distributed RDF system, which addresses the shortcomings of previous work. First, AdPart applies lightweight partitioning on the initial data, which distributes triples by hashing on their subjects; this renders its startup overhead low. At the same time, the locality-aware query optimizer of AdPart takes full advantage of the partitioning to (1) support the fully parallel processing of join patterns on subjects and (2) minimize data communication for general queries by applying hash distribution of intermediate results instead of broadcasting, wherever possible. Second, AdPart monitors the data access patterns and dynamically redistributes and replicates the instances of the most frequent ones among workers. As a result, the communication cost for future queries is drastically reduced or even eliminated. To control replication, AdPart implements an eviction policy for the redistributed patterns. Our experiments with synthetic and real data verify that AdPart: (1) starts faster than all existing systems; (2) processes thousands of queries before other systems become online; and (3) gracefully adapts to the query load, being able to evaluate queries on billion-scale RDF data in subseconds.     

Spatial and seasonal variations and ecotoxicological significance of sediment trace metal concentrations in Kebir-Rhumel basin (Northeast of Algeria)

This study sought to assess sediment contamination by trace metals (cadmium, chromium, cobalt, copper, manganese, nickel, lead and zinc), to localize contaminated sites and to identify environmental risk for aquatic organisms in Wadis of Kebir Rhumel basin in the Northeast of Algeria. Water and surficial sediments (0-5 cm) were sampled in winter, spring, summer and autumn from 37 sites along permanent Wadis of the Kebir Rhumel basin. Sediment trace metal contents were measured by Flame Atomic Absorption Spectroscopy. Trace metals median concentrations in sediments followed a decreasing order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Extreme values (dry weights) of the trace metals are as follows: 0.6-3.4 microg/g for Cd, 10-216 microg/g for Cr, 9-446 microg/g for Cu, 3-20 microg/g for Co, 105-576 microg/g for Mn, 10-46 microg/g for Ni, 11-167 microg/g for Pb, and 38-641 microg/g for Zn. According to world natural concentrations, all sediments collected were considered as contaminated by one or more elements. Comparing measured concentrations with American guidelines (Threshold Effect Level: TEL and Probable Effect Level: PEL) showed that biological effects could be occasionally observed for cadmium, chromium, lead and nickel levels but frequently observed for copper and zinc levels. Sediment quality was shown to be excellent for cobalt and manganese but medium to bad for cadmium, chromium, copper, lead, nickel and zinc regardless of sites.     

Modelling of the filling of micro-cavities of finite geometry by amorphous polymers using hot-embossing

The possibility to fill cavities of finite geometry could be described using an analytical model of the hot-embossing process of viscoelastic polymers. This model is based on the volume conservation during the forming process which allows to predict data concerning the geometrical evolution of the material on one hand, and on the other hand the filling time of cavities in the mould. A particular attention was drawn on the necessary time to fill the cavities depending on their shape or a scale factor for a given cavity shape.     

Experimental analysis and numerical modelling of the forming process of polypropylene replicas of micro-cavities using hot embossing

Numerical modelling of the deformation of a polymer using the finite elements method in axisymetrical mode was performed using the LsDyna^® software to describe the filling of micro-cavities during the forming process of the material using the hot embossing. These simulations firstly allow verifying whether the chosen forming process conditions promote or not an optimized filling of the superficial cavities in order to achieve precise replicas which best reproduce the superficial topography of the mould. The simulations were carried out to evaluate the filling of the cavities taking into account the mechanical behaviour of the selected polymer into the model. Moreover, these models were developed to verify the effect of the distribution of the mould cavities on their filling. The influence of the mobility of non deformable rigid plates on the filling of the cavities represents an auxiliary variable. In the approach presented, the compression plates are assumed to be parallel and non deformable, whereas the polymer disk follows a rubbery behaviour around a temperature equal to 140°C. Globally the modelling results are satisfactory for they are rather close to the experimental observations conducted. In summary, the effect of the normal stress as also the distribution of micro-cavities at the mould surface seem to prevail in the case of the forming process by hot embossing.     

Assessment of sediment quality and pore water ecotoxicity in Kebir Rhumel basin (NE-Algeria): a combined approach

The objectives of this study are to use different approaches to assess the current pollution status in the wadis of the Kebir Rhumel basin. First, sediment trace metal contents were measured by flame atomic absorption spectroscopy. Then, sediment quality was assessed on the basis of contamination assessment indexes such as: Geoaccumulation Index (Igeo), Contamination factor (C(f)), Contamination degree (C(d)), Sediment Pollution Index (SPI) and SEQ guidelines (Consensus Sediment Quality Guidelines). In addition, several toxicity tests (Daphnia magna mobility inhibition acute test-48 h, Aliivibrio fischeri luminescence inhibition acute test - 15/30 mn and Pseudokirchneriella subcapitata growth inhibition chronic test - 72 h) were conducted to assess sediment pore water ecotoxicity. Trace metal concentrations followed the order: Mn > Zn > Pb > Cr > Cu > Ni > Co > Cd. Indexes used indicate varying degrees of sediment quality. Igeo, C(f), C(d) and SPI reveal a polymetallic contamination dominated by two or more elements in which Cd, Cu and Pb are of greatest concern. SEQ guidelines showed that biological effects on fauna would likely be observed occasionally and/or frequently for Cd, Cr, Cu, Pb and Zn contents. Test organisms exposed to sediment pore water showed that the algal P. subcapitata test was more sensitive than the D. magna and A. fischeri tests. Hence, algal growth inhibition proved to be the most sensitive response to contaminants present in sediment extracts but a significant relationship with trace metal contents was not demonstrated.     

A bigraphical model for specifying cloud-based elastic systems and their behaviour

The few recent years have witnessed the appearance of a new kind of self-adaptive systems called cloud based-elastic systems. These systems are particularly appealing for their ability to maintain a decent quality of service and reduce a system’s operating cost at the same time. They achieve this by dynamically adjusting resources allocation in terms of elasticity. Meanwhile, complexity of structural and behavioural aspects related to cloud-based elastic systems increase the difficulty of designing and developing such systems. In this paper, we address this challenge by proposing a formal approach based on bigraphical reactive systems for modelling both structural and behavioural aspects of cloud-based elastic systems. In particular, we represent their behaviour in terms of client/application interactions and elasticity methods at different levels using bigraphical reaction rules. The feasibility of the proposed approach is illustrated through a motivating example running on the top of an Amazon Elastic Compute Cloud (EC2) infrastructure.