Enhanced photoluminescence of CoWO<Subscript>4</Subscript> in CoWO<Subscript>4</Subscript>/PbWO<Subscript>4</Subscript> nanocomposites

CoWO₄/PbWO₄ nanocomposites were successfully synthesized at room temperature (RT) by co-precipitation route without using any templates or surfactants and sintered at 600 °C for good crystallization. The sintered samples were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy and Zeta potential measurements. UV–Visible diffuse reflectance spectroscopy, photoluminescence (PL) and PL lifetime were studied at RT. The results indicate that the composites have two-phase composition: CoWO₄ and PbWO₄. SEM micrograph and zeta potential measurements reveal particle agglomeration. The intrinsic PL peak emission at 467 nm of CoWO₄ nano sample was enhanced upto four times by optimizing the atomic ratio of Pb/Co concentration. The interconnected interface of CoWO₄/PbWO₄ nanocomposites could have led to increase in number of recombination of electron hole pairs in CoWO₄ and enhanced its intrinsic PL emission intensity. The mechanism of enhanced PL emission for the CoWO₄/PbWO₄ nanocomposites can be attributed to charge transfer between [WO₄]^2? and [WO₆]^6? complexes due to intra particle agglomeration leading to possible interface.     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

Role of Zinc (Zn) in Human Reproduction: A Journey from Initial Spermatogenesis to Childbirth

Zinc (Zn), the second-most necessary trace element, is abundant in the human body. The human body lacks the capacity to store Zn; hence, the dietary intake of Zn is essential for various functions and metabolism. The uptake of Zn during its transport through the body is important for proper development of the three major accessory sex glands: the testis, epididymis, and prostate. It plays key roles in the initial stages of germ cell development and spermatogenesis, sperm cell development and maturation, ejaculation, liquefaction, the binding of spermatozoa and prostasomes, capacitation, and fertilization. The prostate releases more Zn into the seminal plasma during ejaculation, and it plays a significant role in sperm release and motility. During the maternal, labor, perinatal, and neonatal periods, the part of Zn is vital. The average dietary intake of Zn is in the range of 8–12 mg/day in developing countries during the maternal period. Globally, the dietary intake of Zn varies for pregnant and lactating mothers, but the average Zn intake is in the range of 9.6–11.2 mg/day. The absence of Zn and the consequences of this have been discussed using critical evidence. The events and functions of Zn related to successful fertilization have been summarized in detail. Briefly, our current review emphasizes the role of Zn at each stage of human reproduction, from the spermatogenesis process to childbirth. The role of Zn and its supplementation in in vitro fertilization (IVF) opens opportunities for future studies on reproductive biology.     

Simultaneous accommodation of Dy3+ at the lattice site of β-Ca3(PO4)2 and t-ZrO2 mixtures: Structural stability,mechanical, optical,and magnetic features

Structurally stable β-Ca₃(PO₄)₂/t-ZrO₂ composite mixtures with the aid of Dy³⁺ stabilizer were accomplished at 1500°C. The precursors comprising Ca²⁺, P⁵⁺, Zr⁴⁺, and Dy³⁺ have been varied to obtain five different combinations. The results revealed the fact that complete phase transformation of calcium-deficient apatite to β-Ca₃(PO₄)₂ occurred only at 1300°C, whereas the evidence of t-ZrO₂ crystallization is obvious at 900°C. The dual occupancy of Dy³⁺ at β-Ca₃(PO₄)₂ and t-ZrO₂ structures was evident; however, Dy³⁺ initially prefers to occupy β-Ca₃(PO₄)₂ lattice until its saturation limit and thereafter accommodates at the lattice site of ZrO₂. The typical absorption and emission behavior of Dy³⁺ were noticed in all the systems and, moreover, the surrounding symmetry of Dy³⁺ domains has been determined from the luminescence study. All the systems ensured paramagnetic response that is generally contributed by the presence of Dy³⁺. A gradual increment in the phase content of t-ZrO₂ in the composite mixtures ensured a significant improvement in the hardness and Young's modulus of the investigated compositions.     

High-speed,two-dimensional digital image correlation algorithm using heterogeneous (CPU-GPU) framework

Two-dimensional digital image correlation (2D-DIC) is an experimental technique used to measure in-plane displacement of a test specimen. Real-time measurement of full-field displacement data is challenging due to enormous computational load of the algorithm. In order to improve the computational speed, the focus of recent research works has been on the approach of parallelization across subsets within image pairs using graphics processing unit (GPU). But alternate GPU-based parallelization approaches to improve the performance of this algorithm as per the order of data processing have not been explored. To address this research gap, our method utilizes parallelism within a subset as well as across subsets for each computation step in an iteration cycle. A heterogeneous (CPU-GPU) framework in combination with a pyramid-based initial values estimation for subsets (in parallel) is proposed in this work. The precompute steps of the proposed framework are implemented using CPU, whereas the main iterative steps are realized using GPU. It is demonstrated that the overall computational speed of the proposed heterogeneous framework improves by compared to a sequential CPU-based implementation for a pair of gray-scale images with a resolution of pixels. As an important milestone, feasibility to measure deformations in real time ( 1 s) is manifested in this study.     

Synthesis and characterization of Y (In,Mn) O3 blue pigment using the complex polymerization method (CPM)

In this paper, a new synthetic pathway is proposed for the system YIn_1-xMn_xO₃, a bright blue inorganic pigment, discovered in 2009. Blue pigment samples with increasing concentration of Mn³⁺ (x?=?0.08, 0.12 and 0.16) were prepared using the complex polymerization method (CPM) and compared with those synthesized via solid state reaction. All powders, the amorphous precursor from CPM and the starting materials for solid state method, were calcined at 1000, 1100, 1200 and 1300?°C for 12?h, and the resulting blue pigments were characterized by X-ray diffraction (XRD), colorimetric system CIE L*a*b* and Near infrared (NIR) reflectance measurements. XRD patterns and Rietveld Refinement show that the lowest temperature at which single hexagonal phase (isostructural to YInO₃) is formed is 1000?°C for CPM method and 1300?°C for conventional solid state method, respectively. The L*a*b* values demonstrate that the coloration of powders prepared by CPM exhibit temperature dependence below 1300?°C, a color shade shift from grayish blue to intense deep blue is observed when heating the samples from 1000 to 1300?°C. Blue pigments obtained by CPM have smaller particle size due to low temperatures and excellent near-infrared reflectance comparable to those by solid state method. Thus, providing advantages for application process and energy efficiency.     

Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu‐Complex Immobilized on Graphitized Mesoporous Carbon

The electrochemical reduction of carbon dioxide (CO₂) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO₂ to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO₂ to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO₂ in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.     

Self-Assembly and Neurotoxicity of β-Amyloid (21–40) Peptide Fragment: The Regulatory Role of GxxxG Motifs

The three GxxxG repeating motifs from the C-terminal region of β-amyloid (Aβ) peptide play a significant role in regulating the aggregation kinetics of the peptide. Mutation of these glycine residues to leucine greatly accelerates the fibrillation process but generates a varied toxicity profile. Using an array of biophysical techniques, we demonstrated the uniqueness of the composite glycine residues in these structural repeats. We used solvent relaxation NMR spectroscopy to investigate the role played by the surrounding water molecules in determining the corresponding aggregation pathway. Notably, the conformational changes induced by Gly³³ and Gly³⁷ mutations result in significantly decreased toxicity in a neuronal cell line. Our results indicate that G³³xxxG³⁷ is the primary motif responsible for Aβ neurotoxicity, hence providing a direct structure–function correlation. Targeting this motif, therefore, can be a promising strategy to prevent neuronal cell death associated with Alzheimer's and other related diseases, such as type II diabetes and Parkinson's.