THE METHOD OF LINES SOLUTION OF THE DISCRETE ORDINATES METHOD FOR RADIATIVE HEAT TRANSFER IN ENCLOSURES

A radiation code based on the method of lines (MOL) solution of the discrete ordinates method (DOM) for transient three-dimensional radiative heat transfer in rectangular enclosures for use in conjunction with a computational fluid dynamics (CFD) code based on the same approach was developed. Assessment of the predictive accuracy of the code by benchmarking its steady-state solutions against exact solutions on one- and three-dimensional test problems shows that the MOL solution of the DOM provides accurate and computationally efficient solutions for radiative heat fluxes and source terms and can be used with confidence in conjunction with CFD codes for transient problems.     

A mathematical model and a heuristic approach for periodic material delivery in lean production environment

One of the important design elements for a good production system is material handling. In cases where it is not well-designed, it can be the bottleneck in the system. Moreover, it can cause a lot of wastes such as waiting time, idle time, and excessive transportation and cost. In this study, material handling in lean-based production environments is taken into account. Depending on the lean structure of the production systems such as being pull-based, smooth, and repetitive, delivering the materials to the stations periodically becomes important. At this point, milk-run trains are highly used in real applications since they enable the handling of required amount of materials on a planned basis. With this study, it is aimed to develop a specific model for milk-run trains which travel periodically in the production environment on a predefined route in equal cycle times with the aim of minimizing work-in-process and transportation costs. Since the milk-run trains having equal cycle times start their tours at the same time intervals, it becomes simple to manage them. For this reason, they are used in lean production systems where level scheduling is performed. The developed model is based on mixed-integer linear programming, and since it is difficult to find the optimum solution due to the combinatorial structure of the problem, a novel heuristic approach is developed. A numerical example is provided so as to show the applicability of the mathematical model and the heuristic approach.     

Photoelectrocatalytic humic acid degradation kinetics and effect of pH,applied potential and inorganic ions

This study addresses the removal of humic acid (HA) dissolved in an aqueous medium by a photoelectrocatalytic process. UV₂₅₄ removal and the degradation of color (Vis₄₀₀) followed pseudo‐first order kinetics. Rate constants were 1.1 × 10^?1 min^?1, 8.3 × 10^?2 min^?1 and 2.49 × 10^?2 min^?1 (R² > 0.97) for UV₂₅₄ degradation and 1.7 × 10^?1 min^?1, 6.5 × 10^?2 min^?1 and 2.0 × 10^?2 min^?1 for color removal from 5 mg dm^?3, 10 mg dm^?3 and 25 mg dm^?3 HA respectively. Following a 2 h irradiation time, 96% of the color, 98% of the humic acid and 85% of the total organic carbon (TOC) was removed from an initial 25 mg dm^?3 HA solution in the photoanode cell. Photocatalytic removal on the same photoanode was also studied in order to compare the two methods of degradation. Results showed that the photoelectrocatalytic method was much more effective than the photocatalytic method especially at high pH values and with respect to UV₂₅₄ removal. The effect of other important reaction variables, eg pH, external potential and electrolyte concentration, on the photoelectrocatalytic HA degradation was also studied. Copyright © 2003 Society of Chemical Industry     

Physical and Mechanical Properties of PP Composites based on Different Types of Lignocellulosic Fillers

The presents preparation and characterization of different types of lignocellulosic fillers (pine wood sawdust/ walnut shell flour/ black rice husk powder) reinforced polypropylene composites were presented. The effect of MAPP as coupling agent (4wt%) on the physical and mechanical properties was also investigated. Polypropylene composites were prepared at different rates of filler/matrix (wt%) by using extrusion (for melt blending) and hot compression molding process. Maximum values of tensile and flexural strength were obtained as 26.1 and 43.4 MPa, respectively, whereas the elongation at break value was 4.11% at 10% pine wood sawdust reinforced PP. Tensile and flexural modulus of composites reached the maximum values as 3855 and 3633 MPa with the composite of 30% walnut shell flour reinforced PP. Characterization of composites was carried out by using tensile test, flexural test, FT-IR, and SEM.     

Transcranial Magnetic Stimulation of the Supplementary Motor Area in the Treatment of Obsessive-Compulsive Disorder: A Multi-Site Study

Recently, strategies beyond pharmacological and psychological treatments have been developed for the management of obsessive-compulsive disorder (OCD). Specifically, repetitive transcranial magnetic stimulation (rTMS) has been employed as an adjunctive treatment in cases of treatment-refractory OCD. Here, we investigate six weeks of low frequency rTMS, applied bilaterally and simultaneously over the sensory motor area, in OCD patients in a randomized, double-blind placebo-controlled clinical trial. Twenty-two participants were randomly enrolled into the treatment (ACTIVE = 10) or placebo (SHAM = 12) groups. At each of seven visits (baseline; day 1 and weeks 2, 4, and 6 of treatment; and two and six weeks after treatment) the Yale-Brown Obsessive Compulsive Scale (Y-BOCS) was administered. At the end of the six weeks of rTMS, patients in the ACTIVE group showed a clinically significant decrease in Y-BOCS scores compared to both the baseline and the SHAM group. This effect was maintained six weeks following the end of rTMS treatment. Therefore, in this sample, rTMS appeared to significantly improve the OCD symptoms of the treated patients beyond the treatment window. More studies need to be conducted to determine the generalizability of these findings and to define the duration of rTMS’ clinical effect on the Y-BOCS. Clinical Trial Registration Number (NCT) at www.clinicaltrials.gov: {"type":"clinical-trial","attrs":{"text":"NCT00616486","term_id":"NCT00616486"}}NCT00616486.     

When Teachers' and Parents' Values Differ: Teachers' Ratings of Academic Competence in Children From Low-Income Families.

The authors examined predictors of teachers' ratings of academic competence of 105 kindergarten children from low-income families. Teachers rated target children's expected competence in literacy and math and completed questions about their perceptions of congruence-dissonance between themselves and the child's parents regarding education-related values. Independent examiners assessed children's literacy and math skills. Teachers' instructional styles were observed and rated along dimensions of curriculum-centered and student-centered practices. Controlling for children's skills and socioeconomic status, teachers rated children as less competent when they perceived value differences with parents. These patterns were stronger for teachers who exhibited curriculum-centered, rather than student-centered, practices. The findings suggest a mechanism by which some children from low-income families enter a path of diminished expectations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation of multiphase block copolymers by redox polymerization process

Redox polymerization of methylmethacrylate (MMA) using Ce(IV) with poly(oxyethylene) having azo and hydroxy functions was carried out to yield methylmethacrylate-ethylene glycol block copolymers with labile azo linkages in the main chain. These prepolymers were used to initiate the radical polymerization of styrene through the thermal decomposition of the azo group, resulting in the formation of multiblock copolymers. Successful blocking has been confirmed by fractional precipitation, a strong change in the molecular weight distribution and spectral measurements.     

Topology-Aware Multiple Routing Configurations for Fault Tolerant Networking

Real-time services require reliable and fault tolerant communication networks to support their stringent Quality of Service requirements. Multi Topology Routing based IP Fast Re-route (MT-IPFRR) technologies provide seamless forwarding of IP packets during network failures by constructing virtual topologies (VTs) to re-route the disrupted traffic. Multiple Routing Configurations (MRC) is a widely studied MT-IPFRR technique. In this paper, we propose two heuristics, namely mMRC-1 and mMRC-2, to reduce the number of VTs required by the MRC to provide full coverage for single link/node failures, and hence, to decrease its operational complexity. Both heuristics are designed to construct more robust VTs against network partitioning by taking their topological characteristics into consideration. We perform extensive experiments on 3200 topologies with diverse structural properties using our automated topology generation and analysis tool. Numerical results show that the amount of reductions in VT requirements get higher up to 31.84 %, as the networks tend to have more hub nodes whose degree is much higher than the rest of the network.     

Functional polyamides. 3. Synthesis and chelating properties of a new poly(amide thioether)

Polymerization of β,β′-(ethylenedithio)dipropionitrile

1 IUPAC name: 4,7-dithiadecane dinitrile.

with formaldehyde in the presence of sulfuric acid was carried out in order to permit the synthesis of polymides containing thioether groups. The obtained poly(amide thioether)s were characterized; they coordinate mercury (II) with a high degree of selectivity.