Salt-assisted solution combustion synthesis of NiFe2O4: Effect of salt type

The effects of three types of salt including NaF, KCl, and NaCl on the properties of NiFe₂O₄ nanoparticles using salt-assisted solution combustion synthesis (SSCS) have been investigated. The synthesized powders were evaluated by SEM, TEM, FTIR, XRD, and VSM analysis. Also, the specific surface area (SSA), as well as size distribution and volume of the porosities of NiFe₂O₄ powders were determined by the BET apparatus. The visual observations showed that the intensity and time of combustion synthesis of nanoparticles have been severely influenced by the type of salt. The highest crystallinity was observed in the synthesized powder using NaCl. The SSA has also been correlated completely to the type of salt. The quantities of SSA was achieved about 91.62, 64.88, and 47.22 m²g^-1 for the powders synthesized by KCl, NaCl, and NaF respectively. Although the magnetic hysteresis loops showed the soft ferromagnetic behavior of the NiFe₂O₄ nanoparticles in all conditions, KCl salt could produce the particles with the least coercivity and remanent magnetization. Based on the present study, the salt type is a key parameter in the SSCS process for the preparation of spinel ferrites. Thermodynamic evaluation also showed that the melting point and heat capacity are important parameters for the proper selection of the salt.     

A privacy-preserving distributed transfer learning in activity recognition

Telecommunication Systems - Along with the widespread use of smartphones, activity recognition using embedded inertial sensors has intrigued researchers. The learning and employing activity...     

Chemical,textural, rheological,and sensorial properties of wheyless feta cheese as influenced by replacement of milk protein concentrate with pea protein isolate

Replacement of milk protein with protein isolates from vegetable resources can significantly influence the characteristics of feta whey less cheese and also decrease the cost of final production. In this study, various blends of milk protein concentrate (MPC) and pea protein isolate (PPI) were mixed at levels of 12% MPC and 0% PPI (MP0), 10% MPC and 2% PPI (MP2), 9% MPC and 3% PPI (MP3), 8% MPC and 4% PPI (MP4), 7% MPC and 5% PPI (MP5), 6% MPC and 6% PPI (MP6) and used in the manufacture of wheyless feta cheese. The chemical, textural, rheological, and sensorial properties, as well as the microstructure of the cheese samples, were evaluated after 1, 15, and 30 days of storage. The general linear model procedure of SAS statistical software was used for statistical analysis. Duncan's multiple range tests was used to compare the means of different treatments. The results showed that all properties of the cheeses were influenced by different levels of PPI due to different total solids content. The use of high concentrations of PPI resulted in a more open protein network, softer structure and decreasing the storage (G′) and loss (G″) moduli in the cheeses. Sensory evaluation of the samples revealed that total score in terms of flavor, texture and overall acceptability was gradually decreased with increasing PPI levels, but still preferable for the panelists. Furthermore, for each sample, with increasing levels of PPI, the whiteness and the greenness were decreased, but the yellowness was increased.     

Electrodes based on nano-tree-like vanadium nitride and carbon nanotubes for micro-supercapacitors

Vanadium nitride(VN) was deposited by DC-sputtering on a vertically aligned carbon nanotube(CNTs)template for the purpose of nano-structuration. This led to the fabrication of hierarchically composite electrodes consisting of porous and nanostructured VN grown on vertically aligned CNTs in a nano-treelike configuration for micro-supercapacitor application. The electrodes show excellent performance with an areal capacitance as high as 37.5 m F cm~(-2) at a scan rate of 2 mV s~(-1) in a 0.5 MK_2SO_4 mild electrolyte solution. Furthermore, the capacitance decay was only 15% after 20,000 consecutive cycles. Moreover,the capacitance was found to increase with VN deposit thickness. The X-ray photoelectron spectroscopy analyses of the electrodes before and after cycling suggest that the oxide layers that form at the VN surface is the responsible for the redox energy storage in this material. Such electrodes can compete with other transition metal nitride based electrodes for micro-supercapacitors.     

Mixed matrix membranes on the basis of Matrimid and palladium-zeolitic imidazolate framework for hydrogen separation

Iranian Polymer Journal - Gas separation membranes with enhanced performance were developed by the introduction of nanosized palladium particles. In this study, gas separation performance of...     

Low‐order optimal regulation of parabolic PDEs with time‐dependent domain

Observer and optimal boundary control design for the objective of output tracking of a linear distributed parameter system given by a two‐dimensional (2‐D) parabolic partial differential equation with time‐varying domain is realized in this work. The transformation of boundary actuation to distributed control setting allows to represent the system's model in a standard evolutionary form. By exploring dynamical model evolution and generating data, a set of time‐varying empirical eigenfunctions that capture the dominant dynamics of the distributed system is found. This basis is used in Galerkin's method to accurately represent the distributed system as a finite‐dimensional plant in terms of a linear time‐varying system. This reduced‐order model enables synthesis of a linear optimal output tracking controller, as well as design of a state observer. Finally, numerical results are prepared for the optimal output tracking of a 2‐D model of the temperature distribution in Czochralski crystal growth process which has nontrivial geometry. © 2014 American Institute of Chemical Engineers AIChE J, 61: 494–502, 2015     

A low pressure SWCNT-ENM sandwich membrane system for the removal of PPCPs from water

While carbon nanotubes are known as efficient adsorbents for removal of a number of contaminants from water, the possibility of their leaching into drinking water has prevented their application in water treatment. In this study, single walled carbon nanotubes (SWCNT) were sandwiched between two electrospun nanofibre membranes (ENM). The relatively small pore size of the ENM prevented the mechanically entangled nanotubes from passing through and contaminating the water. The performance of the SWCNT-ENM was evaluated in a lab-scale setup for the removal of PPCPs. For this purpose, a feed solution spiked with known concentrations of six PPCPs was passed through the membrane system. The target substances included acetaminophen (ACT), bezafibrate (BZF), iopromide (IOP), diclofenac (DCF), carbamazepine (CBZ), and sulphamethoxazole (SMX). The same test was also conducted using a single contaminant (ACT). Results demonstrated a decrease in the overall percent removal of PPCPs as feed flow rate and PPCP concentration increased. For multi-component feeds containing equal amounts of the aforementioned PPCPs, the overall percent removal decreased from 90.8% to 71.0% when increasing the feed concentration from 30 to 600 μg/L. Experiments using sandwiched powdered activated carbon (PAC) showed that the dynamic adsorption capacity of PPCPs by SWCNT-ENM was higher than that of PAC-ENM, and remained unaffected by the feed composition. In addition, the high porosity of this novel membrane allowed for flow of water with low resistance such that the trans-membrane pressure was found to be as low as 4 kPa at a pure water flux of 330 L/m²h.     

Improving the performance of novel polysulfone-based membrane via sulfonation method: Application to water desalination

High-performance polymers for water desalination were designed. A novel polysulfone was prepared via reaction between a new synthesized pyridine-based diol and bis(4-fluorophenyl) sulfone. Also a series of disulfonated copolymers with sulfonation content of 20–50 wt% were prepared to compare the hydrophilicity with the pristine polymer. The generated membranes were characterized by microscopic, mechanical, and thermal methods, and the influence of sulfonation degree on hydrophilicity, water flux, and salt rejection was followed. Water flux of sulfonated membranes was increased compare to pristine membrane as sulfonation increased, while the salt rejection decreased. Optimum application performance was obtained for membrane with 30 wt% sulfonation content. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48568.