Structural,microstructural, and thermal characterizations of a chalcopyrite concentrate from the Singhbhum shear zone,India

The structural and morphological characterizations of a chalcopyrite concentrate, collected from the Indian Copper Complex, Ghatshila, India, were carried out by X-ray diffraction, scanning electron mi...     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

The magnitude of arsenic contamination in groundwater and its health effects to the inhabitants of the Jalangi--one of the 85 arsenic affected blocks in West Bengal, India

To better understand the magnitude of arsenic contamination in groundwater and its effects on human beings, a detailed study was carried out in Jalangi, one of the 85 arsenic affected blocks in West Bengal, India. Jalangi block is approximately 122 km2 in size and has a population of 215538. Of the 1916 water samples analyzed (about 31% of the total hand tubewells) from the Jalangi block, 77.8% were found to have arsenic above 10 microg l(-1) [the World Health Organization (WHO)-recommended level of arsenic in drinking water], 51% had arsenic above 50 microg l(-1) (the Indian standard of permissible limit of arsenic in drinking water) and 17% had arsenic at above 300 microg l(-1) (the concentration predicting overt arsenical skin lesions). From our preliminary medical screening, 1488 of the 7221 people examined in the 44 villages of Jalangi block exhibit definite arsenical skin lesions. An estimation of probable population that may suffer from arsenical skin lesions and cancer in the Jalangi block has been evaluated comparing along with international data. A total of 1600 biologic samples including hair, nail and urine have been analyzed from the affected villages of Jalangi block and on an average 88% of the biologic samples contain arsenic above the normal level. Thus, a vast population of the block may have arsenic body burden. Cases of Bowen's disease and cancer have been identified among adults who also show arsenical skin lesions and children in this block are also seriously affected. Obstetric examinations were also carried out in this block.     

Arsenic groundwater contamination and its health effects in the state of Uttar Pradesh (UP) in upper and middle Ganga plain, India: a severe danger

This communication presents results of our 2-year survey on groundwater arsenic contamination in three districts Ballia, Varanasi and Gazipur of Uttar Pradesh (UP) in the upper and middle Ganga plain, India. Analyses of 4,780 tubewell water samples revealed that arsenic concentrations in 46.5% exceeded 10 microg/L, in 26.7%, 50 microg/L and in 10% 300 microg/L limits. Arsenic concentrations up to 3,192 microg//L were observed. The age of tubewells (n=1,881) ranged from less than a year to 32 years, with an average of 6.5 years. Our study shows that older tubewells had a greater chance of contamination. Depth of tubewells (n=3,810) varied from 6 to 60.5 m with a mean of 25.75 m. A detailed study in three administrative units within Ballia district, i.e. block, Gram Panchayet, and village was carried out to assess the magnitude of the contamination. Before our survey the affected villagers were not aware that they were suffering from arsenical toxicity through contaminated drinking water. A preliminary clinical examination in 11 affected villages (10 from Ballia and 1 from Gazipur district) revealed typical arsenical skin lesions ranging from melanosis, keratosis to Bowens (suspected). Out of 989 villagers (691 adults, and 298 children) screened, 137 (19.8%) of the adults and 17 (5.7%) of the children were diagnosed to have typical arsenical skin lesions. Arsenical neuropathy and adverse obstetric outcome were also observed, indicating severity of exposure. The range of arsenic concentrations in hair, nail and urine was 137-10,900, 764-19,700 microg/kg, and 23-4,030 microg/L, respectively. The urine, hair and nail concentrations of arsenic correlated significantly (r=0.76, 0.61, and 0.55, respectively) with drinking water arsenic concentrations. The similarity to previous studies on arsenic contamination in West Bengal, Bihar and Bangladesh indicates that people from a significant part of the surveyed areas in UP are suffering and this will spread unless drives to raise awareness of arsenic toxicity are undertaken and an arsenic safe water supply is immediately introduced.     

Alterations in Membrane Phospholipid Fatty Acids of Gram-Positive Piezotolerant Bacterium Sporosarcina sp. DSK25 in Response to Growth Pressure

Pressure is an important thermodynamic property of the ocean and the deep biosphere that affects microbial physiology and biochemistry. Here, we report on our investigation of the response of Gram-positive piezotolerant bacterium Sporosarcina sp. DSK25 to hydrostatic pressure. Strain DSK25 responded in an adaptive manner to upshifts of growth pressure and showed systematic changes in phospholipid fatty acids. As the pressure increased from 0.1 to 10 MPa (Megapascal), unsaturated fatty acids in DSK25 increased from 21.7 to 31.1 % of total fatty acids, while the level of iso- and anteiso-branched fatty acids remained unchanged. At higher pressures (30, 50, and 60 MPa), the amount of unsaturated fatty acids decreased, and that of anteiso-branched fatty acids increased from 34.4 to 49.9 % at the expense of iso-branched fatty acids. For the first time, two polyunsaturated fatty acids (PUFA), 18:2n-6 and 18:2n-x, with the latter having much higher abundance than the former, were identified in DSK25. The concentration of the PUFA increased with growth pressure. These results indicate the involvement of unsaturated and methyl-branched fatty acids in the modulation of bacteria membrane fluidity and function over environmentally relevant parameter (pressure). Piezotolerant bacterium Sporosarcina sp. DSK25 appears to utilize two regulatory mechanisms for adaptation to high pressure, a rapid-responding mechanism on transient scale, expressed as increased biosynthesis of monounsaturated fatty acids, and a long-term adaptation mechanism in increased synthesis of anteiso-branched and polyunsaturated fatty acids. Our results further suggest that Gram-positive piezophilic bacteria respond differently than Gram-negative bacteria in adaptation to high pressure.     

Investigation of Eccentric Open Eye Formation in a Slab Caster Tundish

Metallurgical and Materials Transactions B - Inert gas shrouding in tundish can result in the formation of a tundish open eye (TOE) due to the presence of reversed flows on the upper surface of the...     

The kinetics of enzyme catalyzed synthesis of sterol ester

The production of sterol ester by transesterification of β‐sitosterol with fish oil (TAG) catalyzed by Thermomyces lanuginosus immobilized lipase enzyme with varied reaction parameters such as temperature, substrate molar ratio, concentration of enzyme to deduce the enzyme kinetics for the reaction was investigated. For this transesterification reaction, the kinetic model was derived by using Ping Pong Bi Bi Mechanism. The K_m value from the first plot containing fish oil as substrate was 1.31 ± 0.05, while K_m from the second plot containing β‐sitosterol as substrate was 1.01 ± 0.04; identical V_max (0.213 ± 0.06) values were obtained by keeping one of the substrate concentration constant and varying the other. Practical applications : Deduction of reaction kinetics is an important criterion to ascertain the viability of any chemical process. Enzymatic processes need special attention to set model reaction parameters which could help in optimization or design of the actual process. In the present study we have derived the enzyme kinetics for the production sterol ester, an important nutraceutical, and calculated its K_m and V_max values along with the Arhenius activation energy to establish the viability of the reaction.     

Sampling based uncertainty analysis of station blackout in PSB VVER integral test facility

Best estimate accident analysis with uncertainty evaluation is being encouraged in the present licensing scenarios of nuclear power plants. This paper deals with uncertainty and sensitivity analysis for station blackout in PSB VVER integral test facility under the framework of coordinated research project of IAEA. Nodalization was developed using best estimate system code RELAP5/MOD3.2 and its steady state and transient level qualifications are achieved. Sampling based approaches are used to carry out uncertainty and sensitivity/importance analysis. The objective of the analysis is to get confidence for uncertainty methodology by comparing with the experimental results and extend its applicability to NPPs. Uncertainty analysis is carried out by selecting nine important input parameters with specified ranges and its uniform distributions. A design matrix of 45 × 9 is generated for variations of input parameters with the Latin Hypercube Sampling and 45 code runs were taken. Linear regression was also carried out to quantify the effect of each individual input parameter on output parameters in terms of standard rank regression coefficients. Uncertainty band in output parameters is defined between 95th and 5th percentile value. It is observed that most of the experimental values and code calculated reference values are lying within the uncertainty band. For most of the parameters, width of uncertainty band increases with transient progression time.