Prediction of Coating Properties of Thermally Sprayed WC–Co on Complex Geometries

This work outlines the development of an analytical software tool that enables the prediction of various coating properties on any given sprayable geometry. The prediction is achieved by analyzing the input computer-aided design geometry and by correlating the resulting kinematic conditions with experimental measurements. The results of the developed tool have been validated experimentally using HVOF-sprayed WC-17Co coatings. Specifically, coating thickness, microhardness, WC vol.% and specific sliding wear rate are examined and their values are predicted for the case of the external spray of a rotor-like model.     

Evaluation and modeling of benzalkonium chloride inhibition and biodegradation in activated sludge

The inhibitory effect and biodegradation of benzalkonium chloride (BAC), a mixture of alkyl benzyl dimethyl ammonium chlorides with different alkyl chain lengths, was investigated at a concentration range from 5 to 20 mg/L and different biomass concentrations in an activated sludge system. A solution containing glucose and mineral salts was used as the wastewater in all the assays performed. The inhibition of respiratory enzymes was identified as the mode of action of BAC as a result of oxygen uptake rate analysis performed at BAC concentrations ranging between 5 and 70 mg/L. The glucose degradation in the activated sludge at different BAC and biomass concentrations was well-described with Monod kinetics with competitive inhibition. The half-saturation inhibition constant (K_I) which is equivalent to EC₅₀ of BAC for the activated sludge tested ranged between 0.12 and 3.60 mg/L. The high K_I values were recorded at low BAC-to-biomass ratios, i.e. less than 10 mg BAC/g VSS, at which BAC was almost totally adsorbed to biomass and not bioavailable. BAC degradation started as soon as glucose was totally consumed. Although BAC was almost totally adsorbed on the biomass, it was degraded completely. Therefore, BAC degradation was modeled using two-phase biodegradation kinetics developed in this study. This model involves rapid partitioning of BAC to biomass and consecutive degradation in both aqueous and solid phases. The aqueous phase BAC degradation rate was twenty times, on average, higher than the solid phase degradation rate. The specific aqueous (k_I1) and solid (k_I2) phase BAC utilization rate constants were 1.25 and 0.31 mg BAC/g VSS h, respectively. The findings of this study would help to understand the reason of extensive distribution of quaternary ammonium compounds in wastewater treatment plant effluents and in natural water systems although QACs are biodegradable, and develop strategies to avoid their release and accumulation in the environment.     

Estimation of daily traffic emissions in a South-European urban agglomeration during a workday. Evaluation of several "what if" scenarios

Detailed traffic data collected from seven major roads in the city of Athens, Greece are presented and analysed in this study. Vehicles are split into seven categories while vehicle speed is also recorded. Based on these data the emissions of five major pollutants (CO, Benzene, NO(X), PM(10) and VOCs) were calculated with the aid of the COPERT methodology and, based on these results, an Artificial Neural Network was also developed. The results of the two methodologies were compared and it was found that the differences were very small. The ANN model seems to be a reliable alternative to calculate road traffic emissions in a busy road environment. The results reflect the spatial and temporal distribution of the concentrations of the pollutants examined. Alternative "what if" scenarios of the fleet distribution were also applied by means of environmental policy. Since Athens experiences low air quality conditions the correct estimation of traffic emissions is crucial since they play a significant role in the design of an environmental abatement strategy.     

Nitrate reduction in a simulated free-water surface wetland system

The feasibility of using a constructed wetland for treatment of nitrate-contaminated groundwater resulting from the land application of biosolids was investigated for a site in the southeastern United States. Biosolids degradation led to the release of ammonia, which upon oxidation resulted in nitrate concentrations in the upper aquifer in the range of 65-400 mg N/L. A laboratory-scale system was constructed in support of a pilot-scale project to investigate the effect of temperature, hydraulic retention time (HRT) and nitrate and carbon loading on denitrification using soil and groundwater from the biosolids application site. The maximum specific reduction rates (MSRR), measured in batch assays conducted with an open to the atmosphere reactor at four initial nitrate concentrations from 70 to 400 mg N/L, showed that the nitrate reduction rate was not affected by the initial nitrate concentration. The MSRR values at 22 °C for nitrate and nitrite were 1.2 ± 0.2 and 0.7 ± 0.1 mg N/mg VSS_COD-day, respectively. MSRR values were also measured at 5, 10, 15 and 22 °C and the temperature coefficient for nitrate reduction was estimated at 1.13. Based on the performance of laboratory-scale continuous-flow reactors and model simulations, wetland performance can be maintained at high nitrogen removal efficiency (>90%) with an HRT of 3 days or higher and at temperature values as low as 5 °C, as long as there is sufficient biodegradable carbon available to achieve complete denitrification. The results of this study show that based on the climate in the southeastern United States, a constructed wetland can be used for the treatment of nitrate-contaminated groundwater to low, acceptable nitrate levels.     

Decolorization and toxicity of reactive anthraquinone textile dyes under methanogenic conditions

Reductive decolorization of two anthraquinone reactive dyes (Reactive Blue 4, RB4; Reactive Blue 19, RB19) under methanogenic conditions was performed using a mixed, methanogenic culture. Decolorization of the two anthraquinone dyes was investigated to evaluate the rate and extent of color removal as well as to assess possible toxic effects of the dyes and their decolorization product(s) on the methanogenic culture as a function of initial dye concentration ranging from 50 to 300 mg x L(-1). A dextrin/peptone mixture was used as the carbon and electron source. A high rate and extent of color removal was achieved ranging from 4.3 to 29.9 mg x L(-1)h(-1) and 73-91% for RB4, and 13.0-74.4 mg x L(-1)h(-1) and 90-95% for RB19. Initial RB4 concentrations up to 100 mg x L(-1) did not result in any significant inhibition. Both the 200 and 300 mg x L(-1) RB4-amended cultures, and all RB19-amended cultures resulted in severe inhibition of both acidogenesis and methanogenesis. Sequential dye addition at 300 mg x L(-1) for both RB4 and RB19 resulted in accumulation of volatile fatty acids (VFAs) and a very low methane production at the end of the first dye addition after 44 days of incubation. However, at the end of the second dye addition, after a relatively long incubation (384 days), recovery of methanogens in the RB4-amended culture was observed in contrast to the complete inhibition of methanogenesis in the RB19-amended culture. Therefore, RB19 resulted in a higher degree of inhibition of both acidogenesis and methanogenesis than RB4. Addition of dextrin/peptone to dye-inhibited cultures resulted in acidogenesis and a gradual recovery of methanogenesis (mainly aceticlastic methanogenesis) in the RB4-inhibited culture, and a slow recovery of acidogenesis but no recovery of methanogenesis in the RB19-inhibited culture. In contrast, addition of 80% H(2)-20% CO(2) gas to dye-inhibited cultures resulted in recovery of hydrogenotrophic methanogenesis in both the RB4- and RB19-inhibited cultures. In spite of the relatively severe inhibition of the two anthraquinone dyes on the mixed, methanogenic culture, a high extent of color removal was achieved.     

Reversible Amorphous‐to‐Amorphous Transitions in Chalcogenide Films: Correlating Changes in Structure and Optical Properties

Structural transitions in materials are accompanied by appreciable and exploitable changes in physical‐chemical properties. Whereas reversible optically‐driven atomistic changes in crystal‐to‐amorphous transitions are generally known and exploited in applications, the nature of the corresponding polyamorphic transitions between two structurally distinct meta‐stable amorphous phases is an unexplored theme. Direct experimental evidence is reported for the nature of the atomistic changes during fully reversible amorphous‐to‐amorphous switching between two individual states in the non‐crystalline As₅₀Se₅₀ films prepared by pulsed‐laser deposition and consequent changes in optical properties. Combination of surface sensitive X‐ray photoelectron spectroscopy and spectroscopic ellipsometry show that the near‐bandgap energy illumination and annealing induce reversible switching in the material's structure by local bonding rearrangements. This is accompanied by switching in refractive index between two well‐defined states. Exploiting the pluralism of distinct structural states in a disordered solid can provide new insights into the data storage in emerging optical memory and photonic applications.     

Managing the introduction of information security awareness programmes in organisations

Several studies explore information security awareness focusing on individual and/or organisational aspects. This paper argues that security awareness processes are associated with interrelated changes that occur at the organisational, the technological and the individual level. We introduce an integrated analytical framework that has been developed through action research in a public sector organisation, comprising actor-network theory (ANT), structuration theory and contextualism. We develop and use this framework to analyse and manage changes introduced by the implementation of a security awareness programme in the research setting. The paper illustrates the limitations of each theory (ANT, structuration theory and contextualism) to study multi-level changes when used individually, demonstrates the synergies of the three theories, and proposes how they can be used to study and manage awareness-related changes at the individual, organisational and technological level.     

Cryptanalysis of the Tillich�CZ��mor Hash Function

At CRYPTO ’94, Tillich and Zémor proposed a family of hash functions, based on computing a suitable matrix product in groups of the form SL₂(\mathbbF_2ⁿ)SL_{2}(\mathbb{F}_{2^{n}}). We show how to construct collisions between palindromic bit strings of length 2n+2 for Tillich and Zémor’s construction. The approach also yields collisions for related proposals by Petit et al. from ICECS ’08 and CT-RSA ’09.