Performance analysis of tool electrode prepared through laser sintering process during electrical discharge machining of titanium

The International Journal of Advanced Manufacturing Technology - It is of great significance for intelligent manufacturing to study condition monitoring and diagnosis methods to realize early...     

High performance multi-layer varistor (MLV) from doped ZnO nanopowders by water based tape casting: Rheology,sintering, microstructure and properties

In this work, we report the fabrication of a high performance multi-layer varistor (MLV) via water based tape casting method using novel compositions of nanomaterials. Bi₂O₃, CaO and Co₃O₄ doped ZnO nanopowders were prepared by solution combustion synthesis (SCS) route, calcined at different temperatures (550, 650, 750 and 850?°C) and characterized by TEM, XRD, SEM and AFM. The nanopowder (crystallite size ~30?nm) calcined at 650?°C for 1?h was used as the starting material for MLV fabrication. Compositions of the slurry containing doped ZnO nanopowders, binder and plasticizer in water solvent were optimized for the fabrication of thick film. The rheological properties of the slurries having different solid loadings were analysed and thick films of various thicknesses (50–500?µm) were prepared by varying the feeding rate of tape casting. The film roughness of 38.3?nm for the thick film made from 40?wt% solid slurry was found to be superior compared to other samples due to the presence of reduced crack and shrinkage. MLV fired at 950?°C for 1.5?h exhibited a coefficient of nonlinearity of 18 and breakdown voltage of 291.5?V that yields superior properties compared to commercial MLVs.     

Analysis of surface wave behavior in corrugated piezomagnetic layer resting on inhomogeneous half-space

This paper deals with propagation of Love type waves in a Piezomagnetic layer with corrugated boundaries overlying an inhomogeneous half-space. Inhomogeneity of elastic half-space is caused due to exponential variations in elastic parameters. Dispersion relations are obtained for magnetically open and short cases. Prominent effects of inhomogeneity, layer's width and corrugation on the phase velocity of considered wave are illustrated through graphs. Some particular cases are derived and exhibited through graphs. Also the influence of undulation parameter, elastic parameter, and piezomagnetic coefficient on phase velocity of considered wave has been marked separately. The present study finds its applications in designing and optimization of Love wave sensors and Seismic Acoustic Wave (SAW) devices. Findings may also be used for analytical study of wave propagation in piezomagnetic coupled structures.     

Mean-stress and oxidation effects on fatigue behaviour of CM 247 DS LC alloy

During present investigations, an attempt was made to understand the effect of mean stress and oxidation on low cycle fatigue (LCF) behaviour of CM 247 DS LC alloy at T?=?850°C. A significant reduction in fatigue life was observed during LCF tests conducted at strain ratio (R) of 0 as compared to R?=??1. Reduction in fatigue life is attributed to the synergistic effect of mean stress, oxidation and the expanding precipitates within the grain boundaries which imparts high stresses at the grain boundary leading to the intergranular cracking. Additionally, to account the effect of mean stress on fatigue life of the alloy CM 247 DS LC empirical relations developed by Smith–Watson–Topper (SWT) and Morrow were used.     

Effect of CNG flow rate on the performance and emissions of a Mullite-coated diesel engine under dual-fuel mode

On the diesel engines that are used to generate power in transportation and industries, many researchers have to deal with major problems of smoke emissions while extracting higher efficiency. There are many studies which reported the exhaust emission reduction strategies from diesel engines by applying new combustion methods that are capable of mitigating the formation of harmful emissions. One of the methods to reduce the exhaust emissions in diesel engines is to use the dual-fuel combustion mode. In this study, an attempt has been made to evaluate the effect of thermal barrier coating (TBC) on the dual-fuel engine and for this, experiments are carried out on a single-cylinder direct-injection diesel engine under dual-fuel and low heat rejection mode with compressed natural gas (CNG) as gaseous fuel. Engine components that are exposed to the combustion are coated with Mullite (3Al₂O₃-2SiO₂) TBC. Diesel at 200 bar injector opening pressure was used as pilot fuel and CNG at different flow rates (5, 10 and 15 litres per minute) was inducted into the combustion chamber through inlet manifold as main fuel. Experimental results show that the coating of TBC on the engine components has a positive effect on the performance emissions of the dual-fuel test engine. Brake specific fuel consumption (BSFC) was found improved significantly at all flow rates of CNG with coated engine. Emissions on the other hand were also noticed to be on the lower side with the coated engine except NO_x. Smoke emissions were significantly reduced with coated CNG operation of the test engine at all flow rates.     

Structural,Mechanical and Dielectric Properties of Microwave-Assisted High-Energy Ball Milling Synthesis of Hydroxyapatite

Abstract

In the present work, the effect of high-energy ball milling (HEBM) of starting precursors of hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂)/HA system on the processing temperature, morphological, mechanical, and electrical properties are highlighted. Calcination and sintering of HA system were carried out in microwave furnace. XRD study confirmed the evolution of HA phase and EDX analysis confirmed Ca/P ratio ～1.65. Grain size of HA samples, synthesized by using microwave-assisted HEBM technique was found to be in the order of 54–75?nm. Enhanced dielectric and mechanical properties were obtained in HA samples.     

Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures

International Journal of Coal Science & Technology - Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the...     

Enhanced visible green and 1.5 μm radiative emission of Er~(3+) ions in Li_2O-PbO-Al_2O_3-B_2O_3 glasses for photonic applications

A series of Er~(3+) ions doped lithium lead alumino borate(LiPbAlB) glasses were synthesized via melt quench method and their structural,physical and optical properties were studied.Judd-Ofelt theory in correlation with the emission and absorption profiles was performed for the measurement of various radiative parameters for different transitions of Er~(3+) doped glasses.The as-prepared glasses show deep green(550 nm) as well as NIR(1532 nm) emission at 380 and 980 nm excitation wavelengths,respectively.The intensity of emission spectra increases with Er~(3+) ions concentration up to 1.5 mol% and beyond quenching is observed.The Dexter theory applied to the emission profiles reveals the interaction between Er~(3+)ions as dipole-dipole in nature.CIE color coordinates are found to fall in the green region of the visible spectrum.It is observed that 1.5 mol% of Er~(3+) ions concentration is optimum to exhibit the maximum quantum efficiency,branching ratios,gain bandwidth,emission cross-section,gain crosssection and aptly suitable for visible and NIR photonic applications.