Future Hydrological Drought Analysis Considering Agricultural Water Withdrawal Under SSP Scenarios

Hydrological drought is assessed through river flow, which depends on river runoff and water withdrawal. This study proposed a framework to project future hydrological droughts considering agricultural water withdrawal (AWW) for shared socioeconomic pathway (SSP) scenarios. The relationship between AWW and potential evapotranspiration (PET) was determined using a deep belief network (DBN) model and then applied to estimate future AWW using projections of the twelve global climate models (GCMs). 12 GCMs were bias-corrected using the quantile mapping method, climate variables were generated, and river flow was estimated using the soil and water assessment tool (SWAT) model. The standardized runoff index (SRI) was used to project the changes in hydrological drought characteristics. The results revealed a higher occurrence of severe droughts in the future. Droughts would be more frequent in the near future (2021–2060) than in the far future (2061–2100) and more severe when AWW is considered. Droughts would also be more severe for SSP5-8.5 than for SSP2-4.5. The study revealed that the increased PET due to rising temperatures is the primary cause of the increased drought frequency and severity. The AWW will accelerate the drought severities in the future in the Yeongsan River basin.

     

Implication of Size-Controlled Graphite Nanosheets as Building Blocks for Thermal Conductive Three-Dimensional Framework Architecture of Nanocarbons

Preparation of three-dimensional (3D) networks has received significant attention as an effective approach for applications involving transport phenomena, such as thermal management materials, and several nanomaterials have been examined as potential building blocks of 3D networks for the improvement of heat conduction in polymer nanocomposites. For that purpose, nanocarbons such as graphene and graphite nanoplatelets have been spotlighted as suitable filler materials because of their excellent thermal conductivities (ca. 10²–10³ W·(m·K)^?1 along their lateral axes) and morphological merits. However, the implications of morphological features such as the lateral length and thickness of graphene or graphene-like materials have not yet been identified. In this study, a controlled dissociation of bulk graphite to graphite nanosheets (GNSs) using a low-cost, ecofriendly bead mill process was extensively examined and, when configured in a 3D framework architecture formation, the size-controlled GNSs demonstrated that the thermal conductivities of a 3D interconnected framework of GNSs and the corresponding polymer nanocomposite were intimately correlated with the size of the GNSs, thus demonstrating the successful preparation of an efficient thermal management material without highly sophisticated efforts. The capability of controlling the lateral size and thickness of the GNSs as well as the use of a 3D interconnected framework architecture should greatly assist the commercialization of high-quality graphene-based thermal management materials in a scalable production process.     

Early-warning performance monitoring system (EPMS) using the business information of a project

An early-warning performance monitoring system (EPMS) is proposed to objectively measure and monitor the performance of a project for early detection of inherent poor performance problems. The EPMS is built based on project progress data and consists of a database of business information, an optimized theoretical model used as a performance measurement baseline, and an index for monitoring and forecasting the performance. By monitoring the performance through an application of the EPMS to the Korean construction project, the quarterly variation of index was found to differ by project type. These results could explain the environmental changes in the project execution. Therefore, the EPMS is expected to be an alternative for objective performance monitoring and forecasting while applying the existing methods is difficult because of the limited available data on performance indicators. The development procedures may also be useful to researchers interested in approaches to quantitatively analyze trends in various industries.     

Improvement of 19F MR image uniformity in a mouse model of cellular therapy using inductive coupling

Magnetic Resonance Materials in Physics, Biology and Medicine - Improve 19F magnetic resonance imaging uniformity of perfluorocarbon (PFC)-labeled cells by using a secondary inductive resonator...     

Characteristics analysis of the developed surface modification technologies to improve the anti-corrosion performances for offshore equipments

In this study, we carried out the characteristics analysis and experiment research of the developed technologies based on surface modifications to enhance the anti-corrosion performance of offshore equipments. The developed technologies are the dipping method to generate super-hydrophilic surface which is then treated to be super-hydrophobic using chemical deposition and lubricant impregnation, and the spray coating method to generate super-hydrophobic surface. It is well-known that the super-hydrophilic and super-hydrophobic surfaces have good anti-corrosion performance. However, the mechanical properties should be maintained. We have verified the anticorrosion performance through the salt spray test and the measuring contact angle. And, we have evaluated the mechanical characteristics such as hardness. As the results, the dipping and the spray coating methods improved the anti-corrosion performance maintaining its mechanical properties at the same coating thickness of about 80 nm.

     

High calcium cementless fly ash binder with low environmental footprint: Optimum Taguchi design

Despite the myriad of research efforts on exploiting fly ash as an alternative binder, its current role in industry is largely restricted to the supplementary use, which enables only partial replacement of conventional portland cement. Herein, we propose an unprecedented binder composite with the promising early-age strength, which is cost-effective and reduces the CO₂ footprint compared with portland cement. The major constituent is fly ash occupying 76.4%-80.3% by the total mass of the constituents, while calcium oxide, nanosilica, and the minimum amounts of sodium-based activators are added to induce the early-age strength development. Optimization of the composition via the Taguchi design of experiments produced the early (7-day) compressive strength of 16.18 MPa. This value is encouraging considering that it is comparable to that of conventional portland cement and that a cementless composition with the minimum amounts of sodium-based activators was employed. The extensive materials analysis demonstrates that the starting Ca/Na molar ratio and the amount of nanosilica play instrumental roles in strength development by influencing the formation of key reaction products, which include the sodium-substituted AFm phase (the U-phase), katoite and portlandite. Overall, the promising early-age strength coupled with the significantly decreased amount of sodium-based chemicals and the reduced CO₂ footprint will lay a foundation for development of low-cost, environmentally friendly binder in diverse industries.     

Effect of composite coating with poly-dopamine/PCL on the corrosion resistance of magnesium

We report the use of poly(ε-caprolactone) (PCL) and poly-dopamine (PD) as a protective coating that inhibits corrosion of the underlying magnesium metal. The PD coating layer also improved the adhesion of the PCL layer, which has been found to have a significant effect on corrosion behavior. In this study, electrochemical methods were employed to investigate the corrosion behavior of Mg after applying PCL composite coatings. Potentiodynamic polarization measurements determined that the PCL coating pretreated with PD effectively inhibited metal corrosion. In addition, the coating layer with improved adhesion has shown the possibility of inhibiting metal corrosion.     

Aqueous dispersion of 1D van der Waals Mo6S3I6 crystal using biocompatible tri-block copolymer

To achieve the stable dispersion of 1D van der Waals crystal Mo₆S₃I₆ in aqueous media, the tri-block copolymer (Poloxamer) is used as dispersant. The head group of Poloxamer, hydrophobic polypropylene oxide parts can be adsorbed to Mo₆S₃I₆ surface by hydrophobic interaction and the tail group with hydrophilic polyethylene oxide exposed to the outside of the Mo₆S₃I₆ is soluble in water and can form sufficient steric hindrance, resulting in stable aqueous dispersion in nm scale. The excellent biocompatibility of aqueous dispersed nm scale 1D Mo₆S₃I₆ was demonstrated by effective proliferation of C2C12 cells.