Linear regression-based multifidelity surrogate for disturbance amplification in multiphase explosion

Structural and Multidisciplinary Optimization - When simulations are very expensive and many are required, as for optimization or uncertainty quantification, a way to reduce cost is using...     

Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.     

Reactivity of flavanols: Their fate in physical food processing and recent advances in their analysis by depolymerization

Flavanols, a subgroup of polyphenols, are secondary metabolites with antioxidant properties naturally produced in various plants (e.g., green tea, cocoa, grapes, and apples); they are a major polyphenol class in human foods and beverages, and have recognized effect on maintaining human health. Therefore, it is necessary to evaluate their changes (i.e., oxidation, polymerization, degradation, and epimerization) during various physical processing (i.e., heating, drying, mechanical shearing, high-pressure, ultrasound, and radiation) to improve the nutritional value of food products. However, the roles of flavanols, in particular for their polymerized forms, are often underestimated, for a large part because of analytical challenges: they are difficult to extract quantitatively, and their quantification demands chemical reactions. This review examines the existing data on the effects of different physical processing techniques on the content of flavanols and highlights the changes in epimerization and degree of polymerization, as well as some of the latest acidolysis methods for proanthocyanidin characterization and quantification. More and more evidence show that physical processing can affect content but also modify the structure of flavanols by promoting a series of internal reactions. The most important reactivity of flavanols in processing includes oxidative coupling and rearrangements, chain cleavage, structural rearrangements (e.g., polymerization, degradation, and epimerization), and addition to other macromolecules, that is, proteins and polysaccharides. Some acidolysis methods for the analysis of polymeric proanthocyanidins have been updated, which has contributed to complete analysis of proanthocyanidin structures in particular regarding their proportion of A-type proanthocyanidins and their degree of polymerization in various plants. However, future research is also needed to better extract and characterize high-polymer proanthocyanidins, whether in their native or modified forms.     

Infrared Image Processing to Guide the Identification of Damage and Dissipative Mechanisms in 3D Layer-to-Layer Woven Composites

Applied Composite Materials - This article discusses techniques that aim at facilitating the identification of dissipative mechanisms activated in woven composites under cyclic loadings. The focus...     

Improvement of corrosion protection of steel by incorporation of a new phosphonated fatty acid in a phosphorus-containing polymer coating obtained by UV curing

Six formulations containing diacrylate monomers (from 89 to 92.5% (w/w)) as well as a phosphonated methacrylate monomer (from 1 to 10% (w/w)) were prepared. All formulations were UV-cured and the corrosion performance of the resulting coatings applied onto a steel substrate was assessed by electrochemical impedance spectroscopy (EIS). It was first shown that the coatings containing phosphonic acid methacrylate (MAPC1(OH)₂) instead of methacrylate phosphonic dimethyl ester (MAPC1) presented higher corrosion protection related to the strong adhesive properties of phosphonic acid on the metal substrate. A minimum MAPC1(OH)₂ content of 2.5% was determined to provide the highest impedance values (best efficiency). Then, a new bio-based compound, i.e. phosphonic acid-bearing oleic acid (phosphonated fatty acid), was synthesized and added as an inhibitor to the formulations. In the presence of this compound, the corrosion protection was notably improved. The beneficial effect of phosphonated fatty acid was explained by its inhibitive action at the steel/coating interface and by the improvement of the barrier properties.     

Synthesis and Microstructural Characterization of Substoichiometric Ti2Al(CxNy) Solid Solutions and Related Ti2AlCx and Ti2AlN End‐Members

Ti, TiC, Al and AlN powders were mixed to synthesize Ti₂Al(C_xN_y) (x + y < 1) solid solutions, Ti₂AlC_x (x < 1) and Ti₂AlN‐related end‐members by hot isostatic pressing at 1400°C/80 MPa for 4 h. For the pure carbides, it is demonstrated that single‐phased samples can only be obtained when about 15% of substoichiometry on the carbon site is applied. Such a result likely implies that Ti₂AlC_x can only exist in a narrow range of carbon composition. Ti₂AlN nitride can be synthesized with y = 1. Assuming that vacancy content varies linearly from 0 to 0.15 going from Ti₂AlN to Ti₂AlC_0.85 in the solid solutions, element concentrations have been calculated to synthesize different solid solutions. Thus, it is demonstrated that single‐phased and fully dense Ti₂Al(C_0.23N_0.71), Ti₂Al(C_0.45N_0.45), and Ti₂Al(C_0.66N_0.22) carbonitrides can be synthesized.     

Modeling nitrate fluxes at the catchment scale using the integrated tool CAWAQS

Nitrates fluxes in the Grand Morin basin (1200 km(2)), that is subjected to intense agricultural pressure, are considered using in-stream observations (around 250 sampling days over 5 years) and physically based simulations using the CAWAQS model (CAtchment WAter Quality Simulator). In-stream nitrate concentration averaged 6 mg N L(-1), increasing by approximately 0.2 mg N L(-1) yr(-1) around this value (period 1991-1996). Our results show that, over the period of 1991-1996, the differences between in-stream observed nitrate concentrations and simulated nitrate concentrations result from nitrate losses at the basin scale. These losses are due to denitrification by transfer through wetlands, alluvial plains, the hyporheic zone, and by benthic processes in rivers. A mean annual mass balance at the basin scale indicates that 40% of the infiltration flux (3360 kg N km(-2) yr(-1)) is removed from the system via the river network, 40% is stored in aquifers and 20% is lost by denitrification (period 1991-1996).