Feasibility of glioblastoma tissue response mapping with physiologic BOLD imaging using precise oxygen and carbon dioxide challenge

Magnetic Resonance Materials in Physics, Biology and Medicine - Innovative physiologic MRI development focuses on depiction of heterogenous vascular and metabolic features in glioblastoma. For this...     

Genetic background of methane emission by Dutch Holstein Friesian cows measured with infrared sensors in automatic milking systems

International environmental agreements have led to the need to reduce methane emission by dairy cows. Reduction could be achieved through selective breeding. The aim of this study was to quantify the genetic variation of methane emission by Dutch Holstein Friesian cows measured using infrared sensors installed in automatic milking systems (AMS). Measurements of CH₄ and CO₂ on 1,508 Dutch Holstein Friesian cows located on 11 commercial dairy farms were available. Phenotypes per AMS visit were the mean of CH₄, mean of CO₂, mean of CH₄ divided by mean of CO₂, and their log₁₀-transformations. The repeatabilities of the log₁₀-transformated methane phenotypes were 0.27 for CH₄, 0.31 for CO₂, and 0.14 for the ratio. The log₁₀-transformated heritabilities of these phenotypes were 0.11 for CH₄, 0.12 for CO₂, and 0.03 for the ratio. These results indicate that measurements taken using infrared sensors in AMS are repeatable and heritable and, thus, could be used for selection for lower CH₄ emission. Furthermore, it is important to account for farm, AMS, day of measurement, time of day, and lactation stage when estimating genetic parameters for methane phenotypes. Selection based on log₁₀-transformated CH₄ instead of the ratio would be expected to give a greater reduction of CH₄ emission by dairy cows.     

Reduced basis method for managed pressure drilling based on a model with local nonlinearities

To circumvent restrictions of conventional drilling methods, such as slow control actions and inability to drill depleted reservoirs, a drilling method called managed pressure drilling (MPD) has been developed. In MPD, single-phase flow processes can be modeled as a feedback interconnection of a high-order linear system and a low-order nonlinear system. These nonlinearities appear locally both inside and at the boundaries of the computational domain. To obtain a fast simulation platform for real-time purposes (eg, online model-based controller implementation), model order reduction is required for MPD. However, the local nonlinearities render applying model order reduction techniques challenging. In this study, a new approach is proposed to deal with such nonlinearities within the reduced basis (RB) context and it is successfully tested on a model for MPD. Contrary to the classical RB technique, the proposed approach not only does not generate nonphysical spikes at the locations of these local nonlinearities but also yields high speedup factors. The obtained reduced-order model can be used for efficient online simulation and controller design for drilling systems with MPD.     

Corrosion Behaviour of Type 316L Stainless Steel in Hot Caustic Aqueous Environments

Metals and Materials International - The corrosion behaviour of type 316L stainless steel in aqueous 30–50 wt%. NaOH at temperatures up to 90 °C has been elucidated....     

Hybrid make-to-stock and make-to-order systems: a taxonomic review

Production planning and control (PPC) systems that employ aspects from both make-to-order (MTO) and make-to-stock (MTS) production control are known as hybrid MTS/MTO systems. While both MTO and MTS separately have been studied extensively, their combined use has received less attention. However, the literature on this topic is growing and this paper shows that the review performed in this paper is an important addition to the field. We categorise relevant literature according to a novel taxonomy and show that hybrid MTS/MTO production control can be used in different contexts. In addition, an overview of the modelling techniques and methods used in these papers is provided. Based on the reviewed literature, relevant research questions and directions for future research are identified. Finally, it is shown that hybrid MTS/MTO production control is prevalent in practice by discussing research with industrial applications. The paper contains an overview of research on hybrid MTS/MTO production control to be used as reference for researchers active in the field, and provides managerial insights and directions for future research on this topic.     

Managing risks in public-private partnership formation projects

While sourcing by means of Public-Private Partnerships has been lauded over recent years, increasingly risks appear to jeopardise public organisations' unique societal tasks. Integrated Risk Management has not yet been applied to public organisations getting involved in PPP in the sense of understanding risk management capabilities. This article explores risk awareness and risk management practices underpinning maintenance partnership formation by means of a dual case study of two PPP projects and a short industry survey. The results suggest that organisations face several “intolerable risks” linked to project governance and project management responsibilities: insufficient representation of qualified employees, absence of a shared performance system, assignment of responsibilities and decision-making authority, impractical or inappropriate partnership agreement, and timing of the partnership initiative. Cross-case analysis revealed the role of different levels of risk awareness and senior management involvement. Drawing on these findings, a framework for risk management for PPP formation projects is developed.     

Fully renewable limonene‐derived polycarbonate as a high‐performance alkyd resin

Limonene‐derived polycarbonate‐based alkyd resins (ARs) have been prepared by copolymerization of limonene dioxide with CO₂, catalysed by a β‐diiminate zinc–bis(trimethylsilyl)amido complex, and subsequent chemical modification with soybean oil fatty acids using triphenylethylphosphonium bromide as the catalyst. This quantitative partial modification was realized via epoxy–carboxylic acid chemistry, affording ARs with higher oil lengths, lower polydispersities and higher glass transition temperatures (T_g) in comparison to a conventional polyester AR based on phthalic acid, multifunctional polyol pentaerythritol and soybean fatty acid. The novel limonene polycarbonate AR and the conventional polyester AR were evaluated as coatings and both the physical drying (without the presence of the oxidative drying accelerator Borchi® Oxy Coat) and chemical curing (with Borchi® Oxy Coat) processes of these coatings were monitored by measuring the König hardness and complex modulus development with time. A better performance was obtained for the alkyd paint containing polycarbonates modified with fatty acids (FA‐PCs), which showed a faster chemical drying, a higher König hardness and a higher T_g in coating evaluation, demonstrating that the fully renewable FA‐PCs are promising resins for alkyd paint applications. © 2019 Society of Chemical Industry     

Pure CuBi2O4 Photoelectrodes with Increased Stability by Rapid Thermal Processing of Bi2O3/CuO Grown by Pulsed Laser Deposition

A new method for enhancing the charge separation and photo‐electrochemical stability of CuBi₂O₄ photoelectrodes by sequentially depositing Bi₂O₃ and CuO layers on fluorine‐doped tin oxide substrates with pulsed laser deposition (PLD), followed by rapid thermal processing (RTP), resulting in phase‐pure, highly crystalline films after 10 min at 650 °C, is reported. Conventional furnace annealing of similar films for 72 h at 500 °C do not result in phase‐pure CuBi₂O₄. The combined PLD and RTP approach allow excellent control of the Bi:Cu stoichiometry and results in photoelectrodes with superior electronic properties compared to photoelectrodes fabricated through spray pyrolysis. The low photocurrents of the CuBi₂O₄ photocathodes fabricated through PLD/RTP in this study are primarily attributed to their low specific surface area, lack of CuO impurities, and limited, slow charge transport in the undoped films. Bare (without protection layers) CuBi₂O₄ photoelectrodes made with PLD/RTP shows a photocurrent decrease of only 26% after 5 h, which represents the highest stability reported to date for this material. The PLD/RTP fabrication approach offers new possibilities of fabricating complex metal oxides photoelectrodes with a high degree of crystallinity and good electronic properties at higher temperatures than the thermal stability of glass‐based transparent conductive substrates would allow.     

Predicting embrittlement of polymer glasses using a hydrostatic stress criterion

In this study, the aging-induced embrittlement of three polymer glasses is investigated using a previously developed hybrid experimental–numerical method. The evolution of yield stress of unnotched tensile bars upon aging is coupled to the evolution of embrittlement of notched tensile bars using a numerical model combined with a critical hydrostatic stress criterion that determines the onset of failure. The time-to-embrittlement of notched tensile bars with a different notch geometry is predicted and in good agreement with the experimentally determined value. Next to that, the approach is extended to three polysulfone polymers, and it is shown that the value of the critical hydrostatic stress correlates well with the polymers entanglement density: : polymers with a denser entangled network display higher values, that is, a higher resistance against incipient cavitation. © 2019 The Authors. Journal of Applied Polymer Science published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47373.