Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

Development of Motor Model of Rotor Slot Harmonics for Speed Sensorless Control of Induction Motor

This paper proposes a novel mathematical dynamic model to represent the steady‐state and transient‐state characteristics of rotor slot harmonics of an induction motor for sensorless control. Although it is well known that the rotor slot harmonics originate from the mechanical structure of the induction motor, a mathematical model that describes the relationship between the stator/rotor currents of the induction motor and the slot harmonics has not yet been proposed. Therefore, in this paper, a three‐phase model of the induction motor that depicts the rotor slot harmonics is developed by taking into consideration the magnetomotive force harmonics and the change in the magnetic air gap caused by the rotor slots. The validity of the proposed model is verified by comparing the experimental results and the calculated values. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 63–74, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22478     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.     

Evaluating a behavioral demand response trial in Japan: evidence from the summer of 2013

This paper presents results from a behavioral demand response trial targeted to both grid and residential peak hours, in which weekly feedback via paper-based reports, real-time feedback via an in-home display, 30-minute tiered rate, and email prompts are adopted to almost 230 residential customers of a condominium in Funabashi, a city located in Greater Tokyo. Through a randomized experiment, we find that the peak saving impact during grid peak hours (1–4 pm, weekdays only) was 11.6 %, given that all the four interventions provided all at once. In addition, the results show that the variation in peak saving effects by household characteristics exists, and the variation differs among packages of peak saving interventions. Furthermore, we analyzed how much informational elements in weekly reports are considered as useful by residential customers. These results suggest that feedback-based approaches for peak saving can promote households’ energy conservation behavior.     

Vinyl ester/clay based nanocomposites: a complementary study of vinyl ester polymerization by hyphenated rheo‐Fourier transform infrared and separate rheology/Fourier transform infrared measurements

This work is focused on the complementary information obtained from advanced in situ Fourier transform infrared (FTIR) spectroscopy and rheological measurements to correlate the structural changes with rheological properties upon polymerization of different organically modified montmorillonite clay/vinyl ester composites prepared by in situ polymerization. The microstructure and morphology of the nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The effect exerted by the presence of organic clay on the polymerization reaction of a vinyl ester based polymer matrix was evaluated. In situ and ex situ rheo‐FTIR measurements were compared to demonstrate the accuracy of this technique. © 2013 Society of Chemical Industry     

Silicon based on-chip antenna using an LC resonator for near-field RF systems

This paper presents the silicon based on-chip antenna using a LC resonator. The proposed antenna consists of a stacked capacitor and a spiral inductor on silicon substrate. The spiral inductor structure without underpass was proposed for improvement the performance of the silicon based-antenna. The resonant frequency of the fabricated antenna was measured as 465 MHz. Its return loss was 23.4 dB at resonant frequency. The antenna has a gain of ?35.75 dBi due to small size and silicon substrate. However, the fabricated antenna has good performance in the near-field.     

Development of new indices to assess the contribution of moisture sources to indoor humidity and application to optimization design: Proposal of CRI(H) and a transient simulation for the prediction of indoor humidity

Many indoor and outdoor factors (e.g., the presence of occupants, hot-water supply equipment, the use of hygroscopic materials, and ventilation) contribute to indoor humidity. It is important to investigate and understand the contribution of each factor to indoor humidity and to establish an effective method for the design and control of indoor humidity. In this study, indoor humidity was treated as a linear summation of the contribution of various factors, all of which can cause an increase or decrease in indoor humidity. New indices for assessing the contribution of factors to the humidity distribution in a room are proposed as Contribution Ratios of Humidity (CRI_(H)) 1, 2, and 3 which can be calculated based on Computational Fluid Dynamics (CFD) simulations. Furthermore, a transient simulation based on CRI_(H)1 and the Contribution Ratio of Indoor Climate (CRI_(C)) was developed to predict the indoor humidity distribution. A 100-day transient analysis was performed in a living room in which moisture-buffering materials were used. The simulation results were compared with those from a well-mixed zonal model and a CFD transient analysis to confirm the effectiveness of the approach. The analysis provided the three-dimensional spatial distribution of indoor humidity and temperature with good prediction accuracy. The calculation time was approximately equal to that of the well-mixed zonal model and much faster than that of the CFD transient analysis.