Synthesis of polyamide-hydroxyapatite nanocomposites

Simultaneous one-pot syntheses of PA66 and HAp were carried out by extracting H₂O and CO₂ from PA66 monomers and HAp raw materials, respectively, resulting in the formation of a polyamide (PA) 66-hydroxyapatite (HAp) nanocomposite. During the process, a spherical nano-sized HAp particle was precipitated following dissolution of micro-sized CaHPO₄・2H₂O. The PA66 monomers were subsequently adsorbed onto the generated HAp product. Some of the adsorbed PA66 monomers formed a bound polymer on HAp, and an increase in the adhesiveness of the PA66-HAp interface was observed as the polymerization progressed. During this process, the synthesis of a nanocomposite from a micro-sized raw material and creation of an autonomous strong interface between the matrix and filler was achieved. In addition, the shape of the resultant HAp was controllable and could be modified to needle shape by the addition of F⁻ and Mg²⁺ ions to the raw material. HAp could also be changed to plate shape via octa-calcium phosphate (OCP). Notably, during the synthesis, the filler shape of the nanocomposite could be controlled to 0D (particle), 1D (needle), and 2D (plate).     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

Relationship between Expression of Onco-Related miRNAs and the Endoscopic Appearance of Colorectal Tumors

Accumulating data indicates that certain microRNAs (miRNAs or miRs) are differently expressed in samples of tumors and paired non-tumorous samples taken from the same patients with colorectal tumors. We examined the expression of onco-related miRNAs in 131 sporadic exophytic adenomas or early cancers and in 52 sporadic flat elevated adenomas or early cancers to clarify the relationship between the expression of the miRNAs and the endoscopic morphological appearance of the colorectal tumors. The expression levels of miR-143, -145, and -34a were significantly reduced in most of the exophytic tumors compared with those in the flat elevated ones. In type 2 cancers, the miRNA expression profile was very similar to that of the exophytic tumors. The expression levels of miR-7 and -21 were significantly up-regulated in some flat elevated adenomas compared with those in exophytic adenomas. In contrast, in most of the miR-143 and -145 down-regulated cases of the adenoma-carcinoma sequence and in some of the de novo types of carcinoma, the up-regulation of oncogenic miR-7 and/or -21 contributed to the triggering mechanism leading to the carcinogenetic process. These findings indicated that the expression of onco-related miRNA was associated with the morphological appearance of colorectal tumors.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.