Unmanned Aerial Vehicle-Aided 5G NR for Enhanced Network in Urban Scenarios

International Journal of Wireless Information Networks - Recently, Unmanned Aerial Vehicles (UAVs) are being utilized to ensure a better solution to a dependable and cost-effective wireless...     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Investigation of OSN properties of PDMS membrane for the retention of dilute solutes with potential industrial applications

Few commercially available membranes can be used for organic solvent nanofiltration (OSN). Applying OSN in chemical industries is nevertheless of high interest to cut with energy consumption linked to solvent recycling and soluble catalysts recovery. A commercial membrane, PERVAP4060, was used to investigate the retention of dilute solutes in toluene feeds and to mimic metathesis medium. The studied solutes were R-BINAP a neutral polyaromatic molecule used in metathesis chemistry, tetraoctylammonium bromide (ToABr), a charged molecule used as a homogeneous catalyst and n-hexadecane. Retention of polar ToABr (95%) was higher than that of neutral R-BINAP (80%). The transfer mechanism, either pore flow or solution-diffusion, was discussed. All the results obtained suggested that the transport is governed by the solution-diffusion mechanism. The measured retentions could be explained in terms of solubility affinities and diffusion coefficients. The stability and performances of PERVAP4060 were well established, showing the strong potential for industrial applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48359.     

Identifying correlates of breaks in occupational sitting: a cross-sectional study

Office workers are commonly targeted in interventions to modify their sitting behaviour, yet there is limited evidence of the correlates of breaks in sitting to inform intervention development. This study identifies the individual, workplace and spatial configuration correlates of the frequency of breaks in sitting (number/hour) in office workers (n?=?5531) stratified by office type (private-enclosed, shared, open plan). All behaviours and potential correlates were measured via self-report using an online cross-sectional survey. Regression analyses revealed age was the only socio-demographic characteristic associated with frequency of breaks in sitting in all office types. Greater job autonomy and local connectivity were positively associated with frequency of breaks in sitting in shared and open-plan offices. In open-plan offices co-worker proximity was negatively associated with frequency of breaks in sitting. Co-worker visibility was positively associated with frequency of breaks in sitting in all office types. This study demonstrates that individual, workplace and spatial configuration factors are all associated with the frequency of breaks in sitting and that these relationships differ by office type. These observations extend prior studies that have only examined correlates at a single level (e.g. the individual). This evidence could be useful to guide future interventions in the design of workplaces to increase breaks in sitting and workers’ physical activity.     

An efficient approach for prediction of Warburg-type resistance under working currents

In the present study, an efficient approach for the prediction of Warburg-type element is proposed via the analysis of the anode-supported solid oxide fuel cell (SOFC) performance under various working conditions. The details of the performance, polarization curves, impedance behavior, and species distribution profiles within the electrode are investigated via the combination of equivalent circuit model (ECM) analysis and multiphysics numerical simulations. The multiphysics simulation is developed and calibrated with experimental results of SOFC button cells under various working currents. With the complete datasets generated from the calibrated simulations, the trends of the element parameters involved in equivalent circuit model are analyzed. Generalized empirical functions are proposed as well as the procedures of prediction of performance under different conditions. The verification cases show good agreement between the predicted results from proposed model and the reference results. This proposed approach can be utilized to quickly predict the properties for desired performance in the manufacturing processes, and it also has the potential of reducing the computational cost in the simulation of large SOFCs.     

Mass-rearing of the redlegged ham beetle, Necrobia rufipes De Geer (Coleoptera: Cleridae) for laboratory research

A new protocol for mass-rearing the redlegged ham beetle, Necrobia rufipes De Geer, in the laboratory is described, that facilitates the production of large numbers of insects with minimal handling. A culture medium comprised of finely ground (150 μm) dried fish, dry dog food and pieces of dried cured ham was tested on N. rufipes. This rearing medium produced significantly larger population numbers when compared with a range of published and unpublished methods. When reared on this medium with initial colonies of 200 mixed sex adult beetles, there was more than a three-fold increase in N. rufipes adult populations from the original numbers over a 7-8 week period. This simple procedure minimizes cannibalism as the larvae were shifted into glass vials for pupal cell formation.     

PCB and PAH speciation among particle types in contaminated harbor sediments and effects on PAH bioavailability

This research provides particle-scale understanding of PCB and PAH distribution in sediments obtained from three urban locations in the United States: Hunters Point, CA; Milwaukee Harbor, WI; and Harbor Point, NY. The sediments comprised mineral grains (primarily sand, silt, and clays) and carbonaceous particles (primarily coal, coke, charcoal, pitch, cenospheres, and wood). The carbonaceous sediment fractions were separated from the mineral fractions based on their lower density and were identified by petrographic analysis. In all three sediments, carbonaceous particles contributed 5-7% of the total mass and 60-90% of the PCBs and PAHs. The production of carbonaceous particles is not known to be associated with PCB contamination, and it is very unlikely that these particles can be the source of PCBs in the environment Thus, it appears that carbonaceous particles preferentially accumulate PCBs acting as sorbents in the aqueous environment if PCBs are released directly to the sediment or if deposited as airborne soot particles. Aerobic bioslurry treatment resulted in negligible PAH loss from the carbonaceous coal-derived material in Milwaukee Harbor sediment but resulted in 80% of the PAHs being removed from carbonaceous particles in Harbor Point sediment. Microscale PAH extraction and analysis revealed that PAHs in Harbor Point sediment were associated mainly with coal tar pitch residue. PAHs present in semisolid coal tar pitch are more bioavailable than PAHs sorbed on carbonaceous particles such as coal, coke, charcoal, and cenosphere. Results of this study illustrate the importance of understanding particle-scale association of hydrophobic organic contaminants for explaining bioavailability differences among sediments.     

Control of Listeria monocytogenes on turkey frankfurters by generally-recognized-as-safe preservatives

Generally-recognized-as-safe chemicals applied to the surfaces of turkey frankfurters were evaluated for their ability to reduce populations of or inhibit the growth of Listeria monocytogenes. Frankfurters were treated prior to inoculation by dipping for 1 min in a solution of one of four preservatives (sodium benzoate, sodium propionate, potassium sorbate, and sodium diacetate) at three different concentrations (15, 20, and 25% [wt/vol]), with < 0.3% of the preservative being present for each frankfurter. Subsequently, 0.1 ml of a five-strain mixture of L. monocytogenes (10(6) CFU/ml) was used to surface inoculate each frankfurter separately in a sterile stomacher bag. Inoculated frankfurter bags were held at 4, 13, and 22 degrees C, and L. monocytogenes cells were enumerated at 0, 3, 7, 10, and 14 days of storage. The results of this study revealed that at all three concentrations of all four preservatives, the initial populations of L. monocytogenes decreased immediately by 1 to 2 log10 CFU/g. After 14 days of storage at 4 degrees C, L. monocytogenes counts for all treated frankfurters were 3 to 4 log10 CFU/g less than those for the untreated frankfurters. After 14 days of storage at 13 degrees C, L. monocytogenes counts for frankfurters treated with 25% sodium benzoate or 25% sodium diacetate were 3.5 to 4.5 log10 CFU/g less than those for untreated frankfurters, and those for frankfurters treated with 25% sodium propionate or 25% potassium sorbate were 2.5 log10 CFU/g less than those for untreated frankfurters. In all instances, the degree of growth inhibition was directly proportional to the concentration of the preservative. Only frankfurters treated with 25% sodium diacetate or sodium benzoate were significantly inhibitory to L. monocytogenes when held at 22 degrees C for 7 days or longer. Interestingly, the untreated frankfurters held at 22 degrees C were spoiled within 7 days, with copious slime formation, whereas there was no evidence of slime on any treated frankfurters after 14 days of storage.     

Particle-scale understanding of the bioavailability of PAHs in sediment

This study reports results of sediment bioslurry treatment and earthworm bioaccumulation for polycyclic aromatic hydrocarbon (PAH) contaminants found in sediment dredged from Milwaukee Harbor. A significant finding was that bioslurry treatment reduced PAHs on the sediment clay/silt fraction but not on the sediment coal-derived fraction and that PAH reduction in the clay/silt fraction correlated with substantial reduction in earthworm PAH bioaccumulation. These findings are used to infer PAH bioavailability from characterization of particle-scale PAH distribution, association, and binding among the principal particle fractions in the sediment. The results are consistent with work showing that the sediment comprised two principal particle classes for PAHs, coal-derived and clay/silt, each having much different PAH levels, release rates, and desorption activation energies. PAH sorption on coal-derived particles is associated with minimal biodegradation, slow release rates, and high desorption activation energies, while PAH sorption on clay/silt particles is associated with significant potential biodegradability, relatively fast release rates, and lower desorption activation energies. These characteristics are attributed to fundamental differences in the organic matter to which the PAHs are sorbed. Although the majority of the PAHs are found preferentially on coal-derived particles, the PAHs on the clay/silt sediment fraction are more mobile and available, and thus potentially of greater concern. This study demonstrates that a suite of tests comprising both bioassays and particle-scale investigations provide a basis to assess larger-scale phenomena of biotreatment of PAH-impacted sediments and bioavailability and potential toxicity of PAH contaminants in sediments. Improved understanding of contaminant bioavailability aids decision-making on the effectiveness of biotreatment of PAH-impacted sediments and the likelihood for possible reuse of dredged sediments as reclaimed soil or fill.     

PAH sorption mechanism and partitioning behavior in lampblack-impacted soils from former oil-gas plant sites

This study assessed polycyclic aromatic hydrocarbon (PAH) association and aqueous partitioning in lampblack-impacted field soils from five sites in California that formerly housed oil-gas process operations. Lampblack is the solid residue resulting from the decomposition of crude oil at high temperatures in the gas-making operation and is coated or impregnated with oil gasification byproducts, among which PAHs are the compounds of the greatest regulatory concern. A suite of complementary measurements investigated the character of lampblack particles and PAH location and the associated effects on PAH partitioning between lampblack and water. PAH analyses on both whole samples and density-separated components demonstrated that 81-100% of PAHs in the lampblack-impacted soils was associated with lampblack particles. FTIR, 13C NMR, and SEM analyses showed that oil-gas lampblack solids comprise primarily aromatic carbon with soot-like structures. A free-phase aromatic oil may be present in some of the lampblack soils containing high PAH concentrations. Comparable long-term aqueous partitioning measurements were obtained with an air-bridge technique and with a centrifugation/alum flocculation procedure. Large solid/water partition coefficient (Kd) values were observed in samples exhibiting lower PAH and oil levels, whereas smaller Kd values were measured in lampblack samples containing high PAH levels. The former result is in agreement with an oil-soot partitioning model, and the latter is in agreement with a coal tar-water partitioning model. Lampblack containing high PAH levels appears to exhaust the sorption capacity of the soot-carbon, creating a free aromatic oil phase that exhibits partitioning behavior similar to PAHs in coal tar. This study improves mechanistic understanding of PAH sorption on aged lampblack residuals at former oil-gas sites and provides a framework for mechanistic assessment of PAH leaching potential and risk from such site materials.