C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

The Histone Deacetylase Inhibitor BML-210 Influences Gene and Protein Expression in Human Promyelocytic Leukemia NB4 Cells via Epigenetic Reprogramming

Today, cancer is understood as an epigenetic as well as genetic disease. The main epigenetic hallmarks of the cancer cell are DNA methylation and histone modifications. Proteins such as histone deacetylases (HDACs) that cause modifications of histones and other proteins can be targets for novel anticancer agents. Recently, interest in compounds that can inhibit HDACs increased, and now there are many HDACs inhibitors (HDACIs) available with different chemical structures, biological and biochemical properties; hopefully some of them will succeed, probably in combination with other agents, in cancer therapies. In our study we focused on the novel HDACI–BML-210. We found that BML-210 (N-phenyl-Nʹ-(2-Aminophenyl)hexamethylenediamide) inhibits the growth of NB4 cells in dose- and time-dependent manner. In this study we also examined how expression and activity of HDACs are affected after leukemia cell treatment with BML-210. Using a mass spectrometry method we identified proteins that changed expression after treatment with BML-210. We prepared RT-PCR analysis of these genes and the results correlated with proteomic data. Based on these and other findings from our group, we suggest that HDACIs, like BML-210, can be promising anticancer agents in promyelocytic leukemia treatment.     

Formulating Pantone colors by unused base inks,formulation software,and a spectrophotometer

Unused base inks that are not going to be used for printing production are considered to be hazardous materials. Their disposal is expensive, and strict environmental regulations should be followed for their disposal. As an alternative, this article describes how spectral data of unused base inks can be gathered and mixed to generate new colors to incorporate them back to print production for small‐volume jobs. In this study, 30 different Pantone colors were selected as target colors. The CIE L*a*b* spectral data of Pantone colors and unused base inks were gathered via a spectrophotometer. A commercial formulation software, based on multiflux theory and CIE L*a*b* color space, was used to formulate ink recipes that contained the base inks. To quantify the performance of ink recipes, they were mixed and printed using an offset printability tester. The CIELAB ΔE*_ab metric, developed by CIE, was used to detect the visual differences between the target Pantone Color and printed colors.     

Influence of addition of nanosize barium cerate on the microstructure and properties of top-seeded melt growth YBCO bulk superconductors

Barium cerate (BaCeO₃) is one of the possible additions to bulk YBa₂Cu₃O₇ single-grain superconductors to suppress the growth of Y₂BaCuO₅ (Y211) particles. This paper investigates the synthesis of barium cerate powder and its use in YBa₂Cu₃O₇ bulk superconductors. Crystalline barium cerate was synthesized by solid-state reaction, by co-precipitation of oxalates and by sol-gel method. Final calcination was held in air or in vacuum. It is shown that the most efficient in refining Y211 is nanocrystalline barium cerate prepared by sol-gel method calcined in vacuum. The effective refinement of Y211 particles occurred over the entire interval of nanocrystalline BaCeO₃ addition from 0.38 to 1.90 wt%. The optimal concentration of nanosize barium cerate was determined, microstructure and superconducting properties were characterized. The effect of Y211 content on trapped field in YBCO bulks with addition of nanocrystalline barium cerate is shown.     

Methoden zur Analyse des Bruchverhaltens hochfester Stahlfaserbetone

Methods for analyzing the fracture behavior of high‐strength steel fiber‐reinforced concretes High‐strength and ultra‐high strength fiber‐reinforced concretes are most suitable for applications with extreme mechanical loads. These extreme conditions require a ductile behavior under tensile loading, which is obtained solely by the addition of steel fibers and their working mechanism. Profound know ledge on the working mechanism of the steel fibers is necessary for optimizing this material. Usually, this knowledge is obtained by means of classical measuring techniques of destructive tests. Adopting measuring techniques from non‐destructive material testing helps to analyze and to identify the different stages of the fracture mechanism of high‐strength and ultra‐high strength fiber‐reinforced concretes in detail. The application of different non‐destructive measuring techniques is shown exemplary on tensile tests conducted on an ultra‐high strength fiber‐reinforced concrete and its applicability for analyzing the fracture behavior is discussed. The main focus is on the characterization of the relevant failure modes under tensile loading by the different measuring techniques and the comparison with classical measuring techniques (e. g. extensometer). The tensile tests have been analyzed by optical deformation measurements using digital image correlation (DIC), acoustic emission analysis (AE), and 3D computed tomography (CT).     

Cardiac Arrhythmias and Sleep-Disordered Breathing in Patients with Heart Failure

The relationship between heart failure (HF), sleep-disordered breathing and cardiac arrhythmias is complex and poorly understood. Whereas the frequency of predominantly obstructive sleep apnea in HF patients is low and similar or moderately higher to that observed in the general population, central sleep apnea (CSA) has been observed in approximately 50% of HF patients, depending on the methods used to detect CSA and patient selection. Despite this high prevalence, it is still unclear whether CSA is merely a marker or an independent risk factor for an adverse prognosis in HF patients and whether CSA is associated with an increased risk for supraventricular as well as ventricular arrhythmias in HF patients. The current review focuses on the relationship between CSA and atrial fibrillation as the most common atrial arrhythmia in HF patients, and on the relationship between CSA and ventricular tachycardia and ventricular fibrillation as the most frequent cause of sudden cardiac death in HF patients.     

Atmospheric deposition of carbon and nutrients across an arid metropolitan area

Urbanization is increasing rapidly in semi-arid environments and is predicted to alter atmospheric deposition of nutrients and pollutants to cities as well as to ecosystems downwind. We examined patterns of wet and coarse dry deposition chemistry over a five-year period at 7 sites across the Central Arizona-Phoenix (CAP) study area, one of two urban sites within the National Science Foundation's Long-Term Ecological Research (LTER) program. Wet and dry deposition of organic carbon (oC) were significantly elevated in the urban core; in contrast, mean annual wet and dry fluxes of nitrogen (N) were low (<6 kg ha(-1) yr(-1)) compared to previous estimates and did not differ significantly among sites. Wet deposition of sulfate (SO(4)2-) was high across CAP (mean 1.39 kg ha(-1) yr(-1) as S) and represented the dominant anion in rainfall. Dry deposition rates did not show strong seasonal trends with the exception of oC, which was 3-fold higher in winter than in summer; ammonium (NH4+) deposition was high but more variable. Dry deposition of NO3- and oC was strongly correlated with particulate base cations and dust-derived soluble reactive phosphorus (SRP), suggesting that urban-derived dust is scrubbing the atmosphere of acidic gases and entrained particles and increasing local deposition. Differences between measured and predicted rates of dry N deposition to the urban core may be explained by incomplete collection of gas phase N on surrogate deposition surfaces in this hot and arid environment. The extent of urban enhancement of cations and oC inputs to desert ecosystems appears to be restricted to the urbanized metropolitan area rather than extending far downwind, although a low number of sites make it difficult to resolve this spatial pattern. Nevertheless, wet and dry inputs may be important for biogeochemical cycles in nutrient and carbon-poor desert ecosystems within and near arid cities.     

Naproxen removal from water by chlorination and biofilm processes

Naproxen is an anti-inflammatory pharmaceutical that has been detected in natural and engineered aquatic environments. The primary aim of this research was to study chemical transformations of naproxen following chlorine oxidation, which is common in water and wastewater treatment systems. Synthetic waters containing elevated concentrations of naproxen were oxidized by free chlorine at naproxen:chlorine molar ratios of 0.02-3:1 and pH values of 5-9. The formation of naproxen products was dependent on pH, chlorine dosage and contact time. This study demonstrates that naproxen readily reacts with free chlorine and forms disinfection products. The formation of specific reaction products can vary depending on the characteristics of the water or wastewater and treatment operating conditions. More research is needed to identify intermediate and chemical reaction end products and to understand the reaction kinetics of naproxen chlorination for a range of water and wastewater treatment conditions. A secondary aim of this research was to study effects of naproxen and its chlorination products on biofilm processes, which are common in water and wastewater treatment systems and natural aquatic environments. A bioreactor was fed a naproxen solution and then fed a solution at the same naproxen concentration following contact with free chlorine. Results indicate that naproxen was not degraded biologically for the conditions of this study. In contrast, the naproxen solution containing products of chlorination caused an adverse response by discharging biomass from the bioreactor. Results therefore demonstrate that naproxen products of chlorination can adversely affect a biofilm process, which potentially can impact the performance of biofilm processes in natural and engineered aquatic environments. More research is needed to study naproxen chlorination reactions at low concentrations and in complex matrices, and to understand the toxicological relevance of naproxen and its products of chlorination in natural and engineered aquatic environments.