A study on development of cognitive support features in recent ontology visualization tools

Ontologies are currently emerging as representation techniques for overlapping compatibility context domains. The continuing need for more effective information retrieval has lead to the creation of the notions of the semantic web and personalized information management. Subsequently, the need for effective ontology visualization for design, management and browsing has arisen. Several ontology visualization tools have come out to strengthen the users’ cognitive support. The primary goal of this paper is to present a survey on recently implemented ontology visualization tools and their contributions in the enrichment of users’ cognitive support. This work also presents the preliminary results of an evaluation of three visualization tools to determine the suitability of each method for end user applications where ontologies are used as browsing aids.     

Bulk and interfacial physical properties of aqueous solutions of sodium lauryl sulphate and lauryl alcohol with air and benzene system: Part I: Aqueous solutions of sodium lauryl sulphate

Experimental measurements were made of the pH, density, bulk viscosity and electrical conductivity of aqueous solutions of sodium lauryl sulphate for a wide range of concentrations at 25°C. Also, the time-dependent interfacial tension data of this system with mutually saturated benzene phases are reported. Comparison of these data with literature values shows fair agreement in the majority of the cases and further reveals the lack of data in the earlier investigations below the critical micelle concentration of sodium lauryl sulphate in water. A detailed compilation of the data, reported in the literature since 1937, of the pH, density, bulk viscosity, electrical conductivity, surface tension, interfacial tension with benzene, surface excess concentration, surface shear viscosity, diffusivity and critical micelle concentration of the sodium lauryl sulphate system is given. The importance of this anionic surfactant system together with the various factors which influence the physical properties is examined.     

Product beamforming and nested array in tandem for enhanced sonar performance

Multidimensional Systems and Signal Processing - High-performance sonar systems mostly combine a large sensor array and an efficient beamformer for enhancing the overall detection capabilities and...     

Reduced VDAC1, Maintained Mitochondrial Dynamics and Enhanced Mitochondrial Biogenesis in a Transgenic Tau Mouse Model of Alzheimer’s Disease

Alzheimer’s disease (AD) is one of the most common forms of neurodegeneration, defined by reduced cognitive function, which is caused by the gradual death of neurons in the brain. Recent studies have shown an age-dependent rise in the levels of voltage-dependent anion channel 1 (VDAC1) in AD. In addition, we discovered an aberrant interaction between VDAC1 and P-TAU in the brains of AD patients, which led to abnormalities in the structural and functional integrity of the mitochondria. The purpose of our study is to understand the protective effects of reduced VDAC1 against impaired mitochondrial dynamics and defective mitochondrial biogenesis in transgenic TAU mice. Recently, we crossed heterozygote VDAC1 knockout (VDAC1^+/−) mice with transgenic TAU mice to obtain double-mutant VDAC1^+/−/TAU mice. Our goal was to evaluate whether a partial decrease in VDAC1 lessens the amount of mitochondrial toxicity in transgenic Tau (P301L) mice. We found that mitochondrial fission proteins were significantly reduced, and mitochondrial fusion and biogenesis proteins were increased in double-mutant mice compared to TAU mice. On the basis of these discoveries, the current work may have significance for the development of reduced-VDAC1-based treatments for individuals suffering from AD as well as other tauopathies.     

Analytical study of nuclear-coupled density-wave instability in a natural circulation pressure tube type boiling water reactor

An analytical model has been developed to study the nuclear-coupled density-wave instability in the Indian advanced heavy water reactor (AHWR) which is a natural circulation pressure tube type boiling water reactor. The model considers a point kinetics model for the neutron dynamics and a lumped parameter model for the fuel thermal dynamics along with the conservation equations of mass, momentum and energy and equation of state for the coolant. In addition, to study the effect of neutron interactions between different parts of the core, the model considers a coupled multipoint kinetics equation in place of simple point kinetics equation. Linear stability theory was applied to reveal the instability of in-phase and out-of-phase modes in the boiling channels of the AHWR. The results indicate that the stability behavior of the reactor is greatly influenced by the void reactivity coefficient, fuel time constant, radial power distribution and channel inlet orificing. The delayed neutrons were found to have a strong influence on the Type I and Type II instabilities observed at low and high channel powers, respectively. Also, it was found that the coupled multipoint kinetics model and the modal point kinetics model predict the same threshold power for out-of-phase instability if the coupling coefficient in the former model is half the eigen value separation between the fundamental and the first harmonic mode in the latter model. Decay ratio maps were predicted considering various operating parameters of the reactor, which are useful for its design.     

Effect of the surface roughness of conducting polypyrrole thin-film electrodes on the electrocatalytic reduction of nitrobenzene

Conducting polypyrrole (PPy) thin-film electrodes were prepared by the electropolymerization of pyrrole on gold-coated glass plates. Films of various roughnesses were obtained by the variation of the scan rates during electropolymerization. These thin films were modified by doping with 6mM of the dopant NiCl₂. The surface morphology of the films was studied by scanning electron microscopy and atomic force microscopy (AFM), which suggested films prepared with a high scan rate were rougher in nature than the films produced with a low scan rate. The electrocatalytic reduction of nitrobenzene was carried out with these electrodes with the cyclic voltammetry technique in acetonitrile containing 0.1M HClO₄ as a supporting electrolyte. The various results obtained show that the conducting PPy thin-film electrodes were catalytically active toward the electroreduction process. The modified PPy film electrodes doped with NiCl₂ were more active toward nitrobenzene electroreduction than the PPy film alone. The results indicate that the roughness of the films played a very important role in determining their catalytic activity. The PPy films that were more rough in nature were catalytically more active than the smooth films; this may have been due to the availability of more reactive sites in the case of rough films. The apparent diffusion coefficients of the PPy film electrodes were also calculated. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Low‐Density Open Cellular Silicon Carbide Foams from Sucrose and Silicon Powder

Open cellular SiC foams with low densities were prepared by thermo‐foaming and setting (130°C–150°C) of silicon powder dispersions in molten sucrose followed by pyrolysis and reaction sintering at 1500°C. The bubbles generated in the dispersion by water vapor produced by the –OH condensation was stabilized by the adsorption of silicon particles on the air‐molten sucrose interface. The composition of a sucrose‐silicon powder mixture for producing SiC foam without considerable unreacted carbon was optimized. The sucrose in the thermo‐foamed silicon powder dispersion leaves 24 wt% carbon during the pyrolysis. The sintering additives such as alumina and yttria promoted the silicon‐carbon reaction. SiC nanowires with diameters in the range of 35–55 nm and length >10 μm observed on the cell walls as well as in the fractured strut region were grown by both vapor–liquid–solid and vapor–solid mechanisms. Large SiC foam bodies without crack could be prepared as the total shrinkage during pyrolysis and reaction sintering was only ~30 vol%. The relatively low compressive strength (0.06–0.41 MPa) and Young's modulus (14.9–24.2 MPa) observed was due to the large cell size (1.1–1.6 mm) and high porosity (93%–96%).     

Sustainable Drilling of Nano SiC Reinforced Al Matrix Composites Using MQL and Cryogenic Cooling for Achieving the Better Surface Integrity

Silicon - Metal Matrix Nano Composites (MMNCs) are progressive alternatives of formal metal materials, are presently accomplishing a growing inclination of research and engineering approaches for...     

Exploring bioactive fraction of Sargassum wightii: In vitro elucidation of angiotensin-I-converting enzyme inhibition and antioxidant potential

Bioactive fraction of brown algae Sargassum wightii (SWE) was obtained using silica column chromatography and preparative Thin Layer Chromatography (TLC). FT-IR and LC–mass spectrometry ESI analysis revealed presence of various phlorotannins in the SWE. The IC₅₀ value of SWE was found to be 59.91, 51.04, and 55.21 μg/ml for scavenging of 2,2-diphenyl-1-picrylhydrazyl, 2,2-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid), and Ferric Reducing Antioxidant Power assay, respectively. SWE inhibited angiotensin-I-converting enzyme (ACE) in mixed-type manner with IC₅₀ value of 56.96 µg/ml and Ki value of 45 µg/ml. The dual function such as antioxidant and ACE inhibition of SWE warrants further study to understand the antihypertensive potential in vivo.     

Effect of thermal ageing on Nylon 6,6 fibres

The residual effects of thermal ageing at various temperatures on fibres of the aliphatic polyamide Nylon 6,6 have been studied. Both crystal and macro structural characteristics manifest the residual effects. The former category includes changes in intensity, 2 values and half width. The macro changes include introduction of surface damages in the form of holes, material deposits etc. The fibre also undergoes reduction in weight. The structural changes suggest deterioration in the initial tensile characteristics which has been verified experimentally. A direct correlation between the tensile strength and the angular separation of the equatorial reflections has also been observed.