Ductal carcinoma in situ. Part 2: Treatment

In the last decades, the classification of schemes of haematological malignancies have undergone considerable changes both in terms of modifications of previous concepts and of methodological approaches, in parallel with the acquisition of new information on the physiopathological and functional pattern of haemic cells and of their precursors both at the lymph node and bone marrow level. The cyto-morphological aspects of haemic were better defined and integrated by the application of cyto- and histochemical methods, which were subsequently supplemented by bioenzymatic and cytogenetic techniques, then by immunophenotypical studies and finally by biomolecular investigations. Through the use of monoclonal antibodies and the introduction both in research and routine diagnostic practice of multiparameter analysis techniques, it is now possible to correlate several cellular parameters, to identify clonality of malignant cells as well as their lineage assignment and maturation stage. Flow cytometry has become an important, rapid and objective method for the diagnosis of haematological neoplasias. In the present survey we have illustrated the different expression of surface, cytoplasmic and nuclear antigens in haematological malignancies, their correlation with the clinical course of the disease and their diagnostic and prognostic significance.     

The design of a collision avoidance system for use by Pilots operating on the airport ramp and in taxiway areas

Ground collisions have serious implications from both a safety and a commercial perspective. This paper reports on human computer interaction (HCI) research related to the advancement of a collision avoidance system, for use by Pilots operating on the airport ramp and in taxiway areas. Primarily, this paper focuses on the key findings of this research and the emerging HCI design solution.     

Liquid Chromatography–Hybrid Linear Ion Trap–High-Resolution Mass Spectrometry (LTQ-Orbitrap) Method for the Determination of Glycoalkaloids and Their Aglycons in Potato Samples

Potatoes produce biologically active secondary metabolites like glycoalkaloids and their aglycons, which may have both adverse and beneficial effects in the diet. A new analytical method that uses liquid chromatography–mass spectrometry (LTQ-Orbitrap) has been developed for the analysis of glycoalkaloids and their aglycons in potato samples. Two glycoalkaloids, α-solanine and α-chaconine, and two aglycons, demissidine and solasodine, were quantified in potato samples. Samples were extracted using methanol, purified on an SPE Strata C₁₈ cartridge, and then analyzed in HPLC–mass spectrometry (LTQ-Orbitrap) with the FTMS operating in full scan at a resolving power of 30,000 (FWHM), enabling the detection and accurate mass measurement and with the ITMS mode operating in MRM (multiple reaction monitoring) for glycoalkaloids and their aglycons using the [M + H]⁺ ions and their optimized collision energies. After validation, the method was applied to screen different type of potatoes, and some cooking experiment were conducted.     

Interpretability of graphic symbols as a function of context and experience factors.

10 of the graphic symbols for vehicle and equipment operation developed by an industrial design firm were tested for ease of interpretation in context and in isolation. Ss were 30 male mechanical engineering students who differed in their extent of familiarity with such equipment. As hypothesized, the symbols were more often correctly identified in context and by Ss with relevant prior experience. Symbols maintained the same relative order of difficulty under both context and no-context conditions, a difficulty which ranged from 100% correct responses to only a few correct responses. It is concluded that empirical validation of effectiveness is a necessary, although often neglected, step in the symbol development process. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effect of storage temperature on the mobile water content and the fracture toughness of a filled-polymeric system

Charpy specimens of a filled-polymeric system from two partially cured and two completely cured lots obtained from one supplier were stored at selected temperature and relative humidity (RH) conditions to determine the relationship between mobile water content and the fracture toughness of the material. The fracture data showed that specimens from three of the structures exhibited similar ductile-to-brittle transition temperatures (DBTT) as a result of exposure to these environments even though samples from one of the three units were subjected to only part of the pure cycle. Samples from the other partially cured structure consistently displayed a more ductile fracture behavior throughout the conditioning range studied. Exposure to 100°F/75 percent RH environments, the highest temperature and RH of this study, appeared to enhance the fracture toughness of the material from all four units, and no evidence of deleterious chemical aging was found. Mobile water contents were measured on Charpy fracture residues, and these results correlate well with DBTTs of the filled polymer, as does RH. Charpy specimens from the partially cured structure with the best fracture performance have essentially the same water concentrations as the others, suggesting that the lower DBTTs associated with this unit may be due to a lesser degree of crosslinking.     

Thermal conductivity imaging at micrometre-scale resolution for combinatorial studies of materials

Combinatorial methods offer an efficient approach for the development of new materials. Methods for generating combinatorial samples of materials, and methods for characterizing local composition and structure by electron microprobe analysis and electron-backscatter diffraction are relatively well developed. But a key component for combinatorial studies of materials is high-spatial-resolution measurements of the property of interest, for example, the magnetic, optical, electrical, mechanical or thermal properties of each phase, composition or processing condition. Advances in the experimental methods used for mapping these properties will have a significant impact on materials science and engineering. Here we show how time-domain thermoreflectance can be used to image the thermal conductivity of the cross-section of a Nb-Ti-Cr-Si diffusion multiple, and thereby demonstrate rapid and quantitative measurements of thermal transport properties for combinatorial studies of materials. The lateral spatial resolution of the technique is 3.4 microm, and the time required to measure a 100 x 100 pixel image is approximately 1 h. The thermal conductivity of TiCr(2) decreases by a factor of two in crossing from the near-stoichiometric side of the phase to the Ti-rich side; and the conductivity of (Ti,Nb)(3)Si shows a strong dependence on crystalline orientation.     

Controlled modification and direct characterization of multimode-fiber refractive-index profiles

A combination of controlled annealing and characterization by scanning probe microscopy (SPM) is used to demonstrate that the refractive-index proffle of a commercially available silica-based optical fiber can be accurately reconfigured for use as an evanescent field sensor. The process relies on the controlled relocation of the silica glass dopants across the fiber cross section through heat treatment and the accurate measurement of the resulting dopant redistribution with SPM and differential etching techniques. The effect of variable annealing along a length of fiber is to produce a mode transformer to couple light from a laser source into the sensing region of the fiber.     

Accumulation of trifluoroacetate in seasonal wetlands in California

Trifluoroacetate (TFA, CF3COO-) is a stable and mildly phytotoxic breakdown product of several fluorinated organic compounds including the hydro(chloro)fluorocarbons (HFC/HCFCs) that have largely replaced the stratospheric ozone-depleting chlorofluorocarbons (CFCs). TFA enters aquatic ecosystems primarily through precipitation and has the potential to accumulate in water bodies with little or no outflow to the point where toxic concentrations could be achieved. This study demonstrated that seasonal wetlands lacking outflow concentrated TFA as they evaporated during the dry season. In addition, the TFA within the pools was retained between years, which may result in long-term TFA accumulation. Since plants acquire TFA from their growing media, the plants exposed to high aqueous concentrations of TFA within the pools had elevated TFA concentrations with a median concentration of 279 ng/g dry weight in their tissues as compared to 33 ng/g for species growing outside the pools. The highest TFA concentrations in water, which occurred just prior to the pools drying up, were in the 2-10 micrograms/L range. These concentrations are approximately 190 or less than reported toxic concentrations for the most sensitive species tested, but our evidence suggests that these concentrations will increase with continued TFA deposition into the pools.