Coexistence of three ferroelectric phases and enhanced piezoelectric properties in BaTiO3–CaHfO3 lead-free ceramics

Perovskite ferroelectrics possess the fascinating piezoelectric properties near a morphotropic phase boundary, attributing to a low energy barrier that the results in structural instability and easy polarization rotation. In this work, a new lead-free system of (1-x)BaTiO₃-xCaHfO₃ was designed, and characterized by a coexistence of ferroelectric rhombohedral-orthorhombic-tetragonal (R-O-T) phases. With the increase amount of CaHfO₃ (x), a stable coexistence region of three ferroelectric phases (R-O-T) exists at 0.06 ≤ x ≤ 0.08. Both large piezoelectric coefficient (d₃₃～400 pC/N), inverse piezoelectric coefficient (d₃₃^*～547 pm/V) and planar electromechanical coupling factor (k_p～58.2%) can be achieved for the composition with x = 0.08 near the coexistence of three ferroelectric phases. Our results show that the materials with the composition located at a region where the three ferroelectric R-O-T phases coexist would have the lowest energy barrier and thus greatly promote the polarization rotation, resulting in a strong piezoelectric response.     

Fermentation dynamics of Lactobacillus helveticus H9 revealed by ultra‐performance liquid chromatography quadrupole time‐of‐flight mass spectrometry

Lactobacillus (L.) helveticus H9 is a probiotic strain that can produce antihypertensive peptides during milk fermentation. This study analysed the dynamics of skim milk fermentation by L. helveticus H9 by ultra‐performance liquid chromatography coupled to quadrupole time‐of‐flight mass spectrometry (UPLC/Q‐TOF MS). A total of 1992 metabolites were detected from all of the fermented samples in the LC‐MS analysis by multivariate statistical analysis. Metabolites with variable importance in projection (VIP) values ≥2 were considered differentially abundant among samples and were responsible for the unique taste and nutritional and functional qualities of fermented milk. Valine, threonine, l ‐methionine, tyrosine, asparagine and leucine were the predominant amino acids produced during fermentation, and their quantities changed remarkably during the fermentation process. Citric acid and uric acid were the major, and only detectable, organic acids. Some intermediate metabolites, such as N‐acryloylglycine and nicotinamide‐N‐oxide, were also detected. Moreover, certain oligopeptides such as Val‐Leu, Lys‐Gly, Ala‐Glu, Asp‐Ser, Leu‐Pro and Val‐Phe‐Ala were not detected until the middle and late fermentation periods. This study demonstrated dynamic metabolic changes, providing a strong foundation for deciphering the physiological and biochemical mechanisms of the fermentation process.     

A High Capacity All Solid-State Li-Sulfur Battery Enabled by Conversion-Intercalation Hybrid Cathode Architecture

As demands for electrochemical energy storage continue to rise, alternative electrochemistries to conventional Li-ion batteries become more appealing. Here, an intercalation-conversion hybrid cathode that combines intercalation-type VS₂ with conversion-type sulfur chemistry to construct high performance solid-state lithium-sulfur batteries is reported. The layered VS₂ nanomaterial features Li-ion transport channels, metallic conductivity, and active capacity contribution, all of which provide an ideal platform for the solid state S/Li₂S redox couple to unlock its high gravimetric capacity. The S/VS₂/Li₃PS₄ hybrid cathode composite is prepared by a facile, low-cost, and low-energy mechanical blending process. The S/VS₂/Li₃PS₄|Li₃PS₄|Li/In (or Li) all-solid-state cell exhibits sulfur utilization of ≈85%, with a Coulombic efficiency of close to 100%. High areal capacity up to 7.8 mA h cm⁻² with an active material loading (S/VS₂) as high as 15.5 mg cm⁻² is achieved.     

Cross-wind response of tall buildings

A design procedure was developed using random vibration theory and uses mode-generalized cross-wind force spectra and aerodynamic data to calculate the cross-wind displacement and acceleration responses of tall buildings. The force spectra of a number of building shapes and sizes in both suburban and city centre type wind flow are presented. The proposed design procedure gives reasonable estimates of the cross-wind response, compared with wind tunnel measurements, at reduced wind velocities and at structural damping values consistent with modern habitable tall building design. This allows assessment of the structural requirements of tall buildings to be made at an early design stage, and also allows the designers to assess the need for more detailed and expansive wind tunnel model tests.     

An Amphiphilic BODIPY‐Porphyrin Conjugate: Intense Two‐Photon Absorption and Rapid Cellular Uptake for Two‐Photon‐Induced Imaging and Photodynamic Therapy

The new amphiphilic BODPY‐porphyrin conjugate BZnPP and its precursor BZnPH were synthesised, and their linear and two‐photon photophysical properties, together with their cellular uptake and photo‐cytotoxicity, were studied. This amphiphilic conjugate consists of a hydrophobic BODIPY moiety and a hydrophilic tetra(ethylene glycol) chain bridging a cationic triphenylphosphonium group to an amphiphilic porphyrin ZnP through acetylide linkers at its meso positions. A large two‐photon absorption cross‐section (σ=1725 GM) and a high singlet oxygen quantum yield (0.52) were recorded. Intense linear‐ and two‐photon‐induced red emissions were also observed for both BZnPP and BZnPH. Further in vitro studies showed that BZnPP exhibited very efficient cellular uptake and strong photocytotoxic but weak dark cytotoxic properties towards human breast carcinoma MCF‐7 cells. In summary, the two‐photon‐induced emission and the potent photo‐cytotoxicity of BZnPP make it an efficacious dual‐purpose tumour‐imaging and photodynamic therapeutic agent in the tissue‐transparent spectral windows.     

A feedback glucose control strategy for type II diabetes mellitus based on fuzzy logic

Most patients with severe Type II diabetes mellitus, characterised by both insulin resistance and β‐cell failure, eventually require insulin therapy. According to the nonlinear dynamics of homeostasis of blood glucose, proportional‐integral (PI) controller, modified by penalising the feedback error using a fuzzy inference system has been developed to maintain normoglycaemia in a simulated patient using a closed‐loop insulin infusion pump. The simulation employs a compartment model proposed by Vahidi et al. [Vahidi et al., Biochem. Eng. J. 2011, 55(1), 7–16]. The results demonstrate that the fuzzy‐based PI controller is superior to a conventional PI controller for the regulation of blood glucose by insulin infusion for Type II diabetic patients. © 2012 Canadian Society for Chemical Engineering     

Nanostructured alignment layer for liquid crystals

A new type of nanostructured alignment surface is proposed and demonstrated. As in previous nanostructured alignment surfaces, a large pretilt angle of near 45° can be produced reliably. Moreover, this new structure is fabricated with a mask, and there is no randomness involved. The uniformity and anchoring properties of this new surface have been measured to be of excellent quality.     

Thermoelectric Power and <Emphasis Type="Italic">ZT</Emphasis> in Conducting Organic Semiconductor

A recent report on poly(3,4-ethylenedioxythiophene-tosylate) (PEDOT.Tos) suggested that the thermoelectric figure of merit (ZT) could be enhanced when the percentage oxidation was chemically altered. This invokes the question of whether the carrier density or the mobility was modified. In this work, we analyzed data reported by Bibnova et al. (Nat. Mater. 10, 429, 2011) and extracted the transport parameters using three-dimensional (3D) and two-dimensional (2D) models. Our results indicate that the increase in the power factor (S ² σ) was due primarily to upward extension in the range of thermoelectric power. A changeover from lattice scattering to ionized impurity scattering in PEDOT.Tos allowed the equation governing the thermoelectric power to be valid at higher carrier densities, resulting in an increase in the power factor. ZT was also enhanced in PEDOT.Tos due to the low intrinsic thermal conductivity (~0.37 W/m K). The peak value of ZT (~0.3) was found close to the regime where the semiconductor turned “metallic,” beyond which ZT would decrease. We are of the opinion that charge-to-charge scattering (which normally would lower the power factor in highly doped semiconductors) remain subdued in PEDOT.Tos due potentially to electronic screening and a lack of long-range order. We used the reported data to compute the carrier density and mobility assuming ionized impurity scattering and found the peak power factor to occur for carrier density of ~1 × 10²⁶ m⁻³ and mobility of ~5 × 10⁻⁴ m²/V s.     

Residualisation and resilience: public housing in Hong Kong

Public housing has been an important element in the welfare state and a substantial literature has analysed its origins and growth in different places. However, as it has matured and been redefined by privatisation and regeneration, debates have changed and increasingly been concerned with residualisation and decline. This paper outlines considerations affecting comparative analysis of public housing and presents new material related to explanations for the resilience of public housing in Hong Kong.