吸湿凉爽机织物的结构设计与性能

为研究织物组织结构与复合纱线线密度对织物凉爽性能的影响,将线密度为7.4和9.8 tex涤纶分别与线密度为7.8 tex锦纶反向加捻、并线后作为纬纱,以8.3 tex涤纶/竹浆纤维50/50混纺纱作经纱,设计平纹、二上一下斜纹和透孔组织织物.测试织物的瞬间接触凉感、热湿舒适性能及织物干、湿态升温曲线,并采用凉爽温度指数对织物的综合凉爽性能进行评价.研究结果表明:6种设计织物的瞬间接触凉感均高于标准,且平纹织物最好,纬纱粗细对瞬间接触凉感影响不显著;透孔织物透气性最好,且在人体出汗的状态下具有较好的导湿散热性能.平纹织物凉爽温度指数最高,最大凉爽温度为2.8℃,综合凉爽性能最好.     

Functional Properties and Food Applications of Rapeseed Protein Concentrate

Rapeseed protein concentrate (RC), prepared with 2% hexameta-phosphate, was tested for its functionality and performance in some foods. The RC had good nitrogen solubility, fat absorption, emulsification, and whipping capacities but poor water absorption and gelling properties. It increased the emulsion stability, and protein but lowered the fat content of wieners. It also increased the cooking yield, reduced the shrinkage and tenderized meat patties. Results were similar to soybean isolate except for the poorer color and flavor. The cooking yield of RC supplemented wieners was less than the all-meat control and soybean-supplemented wieners. A 9% RC dispersion mixed with an equal volume of eggwhite produced a meringue of comparable stability and texture to that of eggwhite alone.     

基于FusionWidgets Gauges开发高职院校人才培养工作状态数据仪表盘

提出使用FusionWidgets Gauges仪表盘套件展示高职院校人才培养工作状态数据量化指标的仪表盘方法,给出了实现原理,文末给出实现实例。     

稻壳基碳量子点对废水中Pb(Ⅱ)的检测

为了进一步实现生物质废弃资源的综合利用,以及对废水中污染物的检测,以稻壳粉为原料,在600℃和N2氛围下煅烧完成后使用一步水热法制备了钝化剂修饰的碳量子点,得到荧光为蓝绿光的二酸铵(ACA-CQDs)改性稻壳基碳量子点.采用SEM/EDS、HRTEM、FTIR等现代分析技术对碳量子点进行了理化特性表征,发现二酸铵(ACA-CQDs)量子点可以成功检测水中的Pb(Ⅱ).建立了一种有效的检测水体中Pb(Ⅱ)简便快速高效的方法.     

基于测量系统分析(MSA)的实验仪器设备测评

引入测量系统分析(MAS)技术,对实验仪器设备进行测评分析,判断仪器是否合格,保障了仪器设备的精确性,并以实验室四架天平为例,检验了此方法的可行性。     

直纺长丝工艺中聚酯熔体端羧基值控制的工业研究

本文从工业生产的实践出发对杜邦聚酯技术直接纺工艺中端羧基控制进行了研究。通过对熔体端羧基值对无油长丝端羧基、粘度及纺丝加工影响的分析 ,阐明了聚酯端羧基控制范围 ;通过摸索三个反应釜工艺条件对端羧基值的影响 ,找出了端羧基工业控制的有效途径 ,为同类技术装置生产提供了依据     

On the behaviour of tin-containing species in cryolite–alumina melts

Tin oxide (SnO2) dissolves in cryolite–alumina melts forming tetravalent tin species, but under reducing conditions it is reduced to divalent tin and, further, to metallic tin. Freezing point depression data for SnF2 and SnO in molten cryolite (Na3AlF6) corresponded to the formation of one and two new particles, respectively. By anodic dissolution of tin into cryolite-alumina melts divalent as well as tetravalent tin was formed, depending on current density and composition. During electrolysis of SnO2-based oxygen-evolving anodes, the condensate above the melt contained both divalent (SnF2) and tetravalent (SnO2) tin species.     

采用HR型离心机处理烧碱回收盐的工艺改造

介绍了在烧碱蒸发处理回收盐时,采用HR型离心机后进行的工艺改造.确定了保证正常运行的操作关键和主要因素.