浙江示范型居家养老服务中心建设的最新进展——来自杭州市主城区的调查报告

在"十三五"国家老龄事业发展和养老体系建设规划的指引下,示范型居家养老服务中心建设在浙江省全面展开.文章选取杭州主城区三个有代表性的区域,对其中全部18家示范型居家养老服务中心进行了使用后评价普查.通过对设施布点、硬件设施、服务内容、使用状况及户外环境的调查与分析,为改进和完善城市社区养老设施建设提出了相关建议.     

Ultra-Robust Flexible Electronics by Laser-Driven Polymer-Nanomaterials Integration

Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications.     

GaN中质子辐照损伤的分子动力学模拟研究

本文利用分子动力学方法研究了GaN在质子辐照下的损伤。对不同能量（1~10 keV）初级离位原子（PKA）引起的级联碰撞进行了研究，分析了点缺陷与PKA能量的关系、点缺陷随时间的演化规律、点缺陷的空间分布及点缺陷团簇的尺寸特征。研究结果表明，点缺陷的产生与PKA能量呈线性关系，不同类型的点缺陷随时间演化规律相似，点缺陷多产生在PKA径迹旁，点缺陷团簇多为孤立的点缺陷和小团簇。     

面向电信承载网的监控系统设计与实现

面对电信承载网连接的日益增长的海量终端设备，运营商需要结合网络拓扑对终端设备产生的数据进行高效的汇聚统计、异常分析、故障定位处理等操作。针对已有系统存在的操作困难、分析效率低等问题，设计与实现了一个面向电信承载网的高效监控系统，提供实时与离线数据分析和多维可视化分析的能力。对网管、认证、终端等系统及设备采集的数据进行结构化存储，对采集的数据进行拓扑相关性和时间序列方法分析，根据分析结果实现基于动态阈值控制的异常实时告警、定位等操作，并提供多维度可视化分析对网络状态进行实时监控。实际应用结果表明，该系统性能优异，具有良好交互性，能较好地满足承载网运维人员业务分析需求。     

A boronic acid-based fluorescent hydrogel for monosaccharide detection

A boronic acid-based anthracene fluorescent probe was functionalised with an acrylamide unit to incorporate into a hydrogel system for monosaccharide detection. In solution, the fluorescent probe displayed a strong fluorescence turn-on response upon exposure to fructose, and an expected trend in apparent binding constants, as judged by a fluorescence response where D-fructose>D-galactose>D-mannose>D-glucose. The hydrogel incorporating the boronic acid monomer demonstrated the ability to detect monosaccharides by fluorescence with the same overall trend as the monomer in solution with the addition of D-fructose resulting in a 10-fold enhancement (≤0.25 mol/L).     

PP/PCL/石墨/碳纳米管复合材料的制备及电性能分析

采用熔融共混法制备了石墨（G）、碳纳米管（CNTs）与聚丙烯（PP）、聚己内酯（PCL）导电复合材料，通过改变G的添加量制备了系列导电复合材料。主要测试了熔体流动速率、力学性能、导电性能、电热性能，并进行了电子显微镜观察结构、差示扫描量热法分析、热失重分析。结果表明，PCL与PP混合后，PP的拉伸强度提升了4.375 MPa，在加入G/CNTs之后，力学性能受影响较大下降了约73.5 %；G/CNTs的加入还能有效降低PP的电阻率，使其从绝缘体变为半导体材料电阻率为7.83×10⁶ Ω·m；PP与PCL共混后复合材料的热稳定性得到了显著提高，初始分解温度从368.88 ℃升高至398.95 ℃，在加入G/CNTs管后又进一步提高至408.78 ℃。     

Two-step method to deposit ZrO2 coating on carbon fiber: Preparation,characterization, and performance in SiC composites

Recently, ceramic matrix composites reinforced by short carbon fibers (CFs) attracted increasing attentions. To further improve mechanical properties and oxidation resistances, CFs were subjected to oxidation and acidification followed by sol-gel dip-coating to deposit ZrO₂ on their surfaces. ZrO₂-C_f/SiC composites were fabricated by joint hot compression molding and sintering, compared to C_f/SiC and SiC prepared by the same method. Microstructural analyses indicated that ZrO₂ coatings were successfully deposited on CF surfaces, formed strong bonding and interfaces between CF and the matrix. Meanwhile, CFs were found uniformly distributed in SiC matrix with random orientations. Flexural curves of ZrO₂-C_f/SiC and C_f/SiC revealed the presence of “false plasticity” regions after sharp drops, which were quite different from brittle flexural behavior of SiC ceramic. Compression strength of the three samples showed step-up growth. ZrO₂-C_f/SiC exhibited the highest value, indicating the introduction of CFs and ZrO₂ coatings do have great influence on mechanical performances. After heat treatment, ZrO₂-C_f/SiC exhibited better oxidation resistance than C_f/SiC, with weight loss ratios estimated to ??3.76% and ??6.43%, respectively. These improved properties indicated that ZrO₂-C_f/SiC would be excellent alternatives to other existence materials under ultra-high temperature environments.