钢包钢水保温覆盖剂的开发

研制了钢包钢水新型保温覆盖剂，主要成分为（%）；15-25C，20-35SiO2,10-20Al2O3,2-5Fe2O3,15-25CaO,2-5MgO，新覆盖剂铺展性与保温性能良好。经转炉钢水160t钢包生产使用，统计数据表明，镇静15min后钢水降温速度由原碳化稻壳覆盖剂1.33℃/min降低到0.93℃/min。     

固体火箭发动机喷管用烧蚀隔热材料研究进展

介绍了固体火箭发动机喷管用烧蚀隔热材料的研究进展，喷管受热分析，指出了先进复合材料的发展趋势，提出碳／酚醛复合材料在制造低成本的发动机喷管中仍有重大使用价值。     

Design Errors: Inefficiency or Carelessness of Designer?

Design defects are experienced in many projects; the difference is only in the extent of occurrence. This technical note discusses a design error case in a building project in Nepal, where the designer made the wrong assumptions in roof treatment work for waterproofing as well as for heat insulation purposes. From the investigation of the problem, it was found that the waterproofing polymer was not applied directly over concrete slab top. Use of heavy concrete block as a heat insulation material also helped to increase the leakage problem. The problem evoked loss of prestige for project officials, the design consortium, and the contractor.     

A comparative study of thin film insulation techniques for gold electrodes

The increasing use of microelectrodes in small sample volumes and biological environments require the use of thin film insulators. The insulating ability of the thin film insulators electrophoretic paint, polyimide, allylphenol phenol copolymer and an epoxy dip coat have been assessed using gold wires coated in the relevant film. Insulation was assessed by recording the current from the wires in a solution of known redox couple. The effect of prolonged storage in aqueous solutions was also investigated. The most successful insulating approach, with regards to insulative ability, prolonged use in aqueous environments and speed of application, was the combination of cathodic electrophoretic paint followed by polyimide.     

干式接地变压器的故障分析

本文介绍两台干式接地变压器相继故障,通过事故象征,进行全面分析,由于制造工艺欠佳等原因,造成运行中高压侧绕组匝间短路,确定了产品故障的根本原因。     

深井阳极技术在城市大口径供水旧管线阴极保护中的应用

天津市自来水集团对两条已运行20年的大口径水源管道补加了阴极保护，采用了深井阳极技术，阳极井深达120m，解决了气阻和干扰问题，全线达到保护电位，延长了管道的使用寿命，节约了大量资金。本文介绍了此类型管道的保护电流密度选取、深井阳极形式，绝缘处理方式及干扰解决办法。     

Influence of thermal shock on insulation effect of nano-multilayer thermal barrier coatings

Thermal barrier coatings (TBCs) with nano-multilayer structure were investigated by thermal shock test. The change of insulation effect during thermal shock test was studied by in-situ temperature monitor with a thermal couple set into the substrate. Microstructure and electrical properties of TBCs were characterized by SEM and Impedance Spectroscopy, respectively. Initial increase in insulation effect was observed and related to the formation and growth of perpendicular microcracks in top coat and transversal microcracks in TGO. With thermal shock, the insulation effect decreased due to the further growth of microcracks in top coat and TGO which induced the failure of TBCs.     

医用充气式保温毯控制系统设计及仿真

针对医用充气式保温毯的温度控制要求,提出其温度控制闭环系统的结构,系统的硬件电路主要由温度传感器、单片机及RS232通讯模块等组成。采用PWM方法控制晶闸管导通时间的方式来改变加热丝的加热时间、采用自适应模糊PID控制方法实现保温毯气囊出气温度的自动调节与控制。将整个控制过程分为两个阶段:自动调节初始阶段,加热丝加热的占空比为100%;当温度达到一定值后转入自适应模糊PID控制阶段,由相应控制量来决定加热丝加热的占空比,实现气体温度的调节。通过MATLAB仿真分析表明,所采用的自适应模糊PID控制方法优于常规的PID控制,具有良好的适应性和鲁棒性,可明显提高系统的稳态精度。     

Thermal performance indicators for refrigerated road vehicles

An experimental evaluation of insulation effectiveness, pull-down times and effectiveness of a mechanical refrigeration unit was performed on five refrigerated panel vans. Additionally, a mapping of temperature variability in the cargo space was carried out during a simulated journey encompassing several door openings. The temperature variability measured in the vans was neither correlated to the effectiveness of the insulation nor the time required to achieve complete cooling of the cargo space. These criteria are common thermal performance indicators used to evaluate refrigerated vehicles in international standards. The efficiency of insulation was correlated to the pull-down times, presenting the possibility of calculating the former as a function of the latter. The temperature variability was correlated with the time required for the unit to recover temperature control after a door opening and the difference between the maximum and minimum temperatures reached during a door opening cycle.     

真空状态下变压器铁心对地绝缘电阻的变化规律

通过测试变压器铁心对地的绝缘电阻及其模型的绝缘电阻，分析了绝缘电阻随真空度变化而变化的机理。总结出了绝线电阻随真空度变化的规律。