A model for multicomponent diffusion in oxide melts

A general flux equation for multicomponent diffusion in oxide melts is presented. An explicit method was developed to calculate the gradients of single-ion activities from those of oxides with the constraints of local equilibrium and electroneutrality. This resolves ambiguity in quantifying the thermochemical driving force for ionic diffusion. A model equation for multicomponent ionic diffusion was derived within the framework of non-equilibrium thermodynamics by de Groot and Mazur. The proposed model takes empirically measurable quantities as input variables, so the diffusion calculations are consistent with thermochemical data, as furnished by the CALPHAD (CALculation of PHAse Diagrams) method, as well as ionic mobility measurements. Although the model is derived for oxides, it can be applied to diffusion in other concentrated liquid electrolytes, such as chloride and fluoride melts. Formulas for multicomponent ionic diffusion in various reference frames are presented with respect to mole fraction.     

Systematics study through scanning electron microscopy; a tool for the authentication of herbal drug Mentha suaveolens Ehrh

In all over the world, herbal drugs are usually adulterated with similar species or varieties due to incorrect identification. Most of herbal products devoid purity and quality, therefore an attempt was carried out to identify plant species and authenticate its herbal drug products from Mentha suaveolens. Microscopy tools provide an excellent platform to identify plants at species level. In this study, microscopic and pharmacokinetic parameters of M. suaveolens were observed. Plant species were collected from high diverse areas of Northern Pakistan. Macro and micro‐morphology including palynology and anatomical features were analyzed to study M. suaveolens. Species characteristics were studied, while implementing microscopic techniques for the delimitation and identification of the species. Traditionally Mentha species are used to cure several diseases that is, digestive disorders, respiratory disorders. Micromorphology (stem, leaves, flowers structure, length etc.), palynology (shape, size of pollen etc.), and anatomical characters (types of stomata, epidermal cell shape, and trichomes) were studied. Micromorphology and anatomical characters were of great interest and significance to discuss the taxonomy of the species. Taxonomic characters were studied to characterize and authenticate the species. The aim of the present study is to observe in detail the taxonomic identification of the species in term of morphology, palynology, and foliar epidermal anatomy for the correct identification along with their medicinal uses in the area.     

Application of annexation principle of thermodynamic property of In-Pb-Sb and In-Bi-Pb melts

Based on the principle of annexation and phase diagrams, the structural units of In-Pb-Sb and In-Bi-Pb melts were determined, and their calculating models of mass action concentrations were formulated. Calculated results agree well with practical values, which in turn show that the models deduced can reflect the structural realities of corresponding melts and the principle of annexation is applicable not only to some binary metallic melts, but also to ternary metallic melts.     

熔体的粘度，亚稳相，相变和相图——Ⅲ．合金液相相图

对Sn（x）Bi（1-x）11种组分（x=0.10％，20％…80％，90％，100％）的熔体的粘度进行了测量，给出了它们的相变点Tt，相区和相参数；根据这些参数作出了一个二元合金液相相图；为了表明相区的划分和每个相区的结构特征提出两种相图的形式；第1，温度一组分（T-X）图，第2，结构-组分（df-x）图。     

聚酯装置熔体过滤器的国产化改造

熔体过滤器为聚酯装置关键设备,其国产化问题一直未能解决。该文通过对天津分公司200kt/a聚酯装置熔体过滤器改造方案的介绍,探讨了其国产化条件,分析了国产熔体过滤器的结构特点,并与进口过滤器进行了对比,提出了一些看法。     

新疆叶尔羌河中游渠首工程地基处理设计

叶尔羌河洪水动态规律极为复杂,以其极高的起涨速率、异常的高洪峰值闻名于世。中游渠首地基是粘粒极少、极松散的粉细沙层。针对其特点,采用振冲挤密砂石桩、防渗防冲连续墙、抗冲柔性土工布金属网格石笼等综合处理措施进行设计。     

Influence of pre-oxidation on the hot corrosion of Ti3SiC2 in the mixture of Na2SO4-NaCl melts

Polycrystalline Ti₃SiC₂ suffered from serious hot corrosion attack in the mixture of 75wt.%Na₂SO₄ + 25wt.%NaCl melts at 850 °C. In order to improve the hot corrosion resistance of this material, pre-oxidation treatment was conducted at 1200 °C in air for 2 h. A duplex oxide scale with an outer layer of TiO₂ and an inner layer of a mixture of TiO₂ and SiO₂ was formed during the pre-oxidation. Because the outer oxide layer of the pre-oxidation treated specimens could inhibit hot corrosion process, they exhibited good hot corrosion resistance in the mixture of 75wt.%Na₂SO₄ + 25wt.%NaCl melts at 850 °C for 50 h. However, during the hot corrosion the outer layer of TiO₂ would degrade gradually. Once the outer layer damaged, the hot corrosion rate increased sharply, the corrosion behavior was similar to Ti₃SiC₂ corroded under the same conditions. The microstructure and phase compositions of the hot corrosion samples were investigated by SEM/EDS and XRD.     

Spherical Yttrium Aluminum Garnet Embedded in a Glass Matrix

Containerless processing was used to investigate the glass-forming behavior of Al₂O₃–Y₂O₃ glass. The amorphous bulk samples were obtained at compositions with 25–37.5 mol% yttria when the melt was cooled at a cooling rate of ∼250 K/s. Although small spherical particles (∼10 μm) with the same composition of the matrix were detected in the amorphous samples with 32.5–37.5 mol% yttria, the microfocus X-ray diffraction result indicated that the small spherical particles were crystalline Y₃Al₅O₁₂ garnet (YAG), rather than being amorphous. This observation suggested that small YAG particles could not grow larger after their nucleation, because of the high viscosity at high undercooling and the high cooling rate, which would graze the nose of the continuous cooling temperature diagram of YAG.     

Role of Acetic Acid Added to the Reaction Media for the Enantio-differentiating Hydrogenation of Methyl Acetoacetate Over a Tartaric Acid-modified Nickel Catalyst

The role of acetic acid added to the reaction media for the enantio-differentiating hydrogenation of methyl acetoacetate over a (R,R)-tartaric acid-in-situ-modified nickel catalyst was studied from the viewpoint of the hydrogenation rate during repeated runs. The hydrogenation of methyl acetoacetate on the “enantio-differentiating sites” of a tartaric acid-modified nickel catalyst was specifically accelerated by the acetic acid added to the reaction media to increase the enantio-differentiating ability of the catalyst. In order to increase the enantio-differentiating ability, the addition of acetic acid to the reaction media was required in each run during the repeated use of the catalyst.     

交联聚乙烯/丙烯酸/蒙脱土纳米复合材料的制备与表征

在制备交联聚乙烯／蒙脱土纳米复合材料的过程中,利用交联聚乙烯的特征,通过在与蒙脱土熔融复合的过程中加入单体丙烯酸作为相容剂,制得交联聚乙烯／蒙脱土纳米复合材料。用XRD、TEM进行表征,并对材料的力学性能进行测试。结果显示：复合材料的拉伸强度与原基材相比有所上升,而冲击强度有所下降。