Two-step method to deposit ZrO2 coating on carbon fiber: Preparation,characterization, and performance in SiC composites

Recently, ceramic matrix composites reinforced by short carbon fibers (CFs) attracted increasing attentions. To further improve mechanical properties and oxidation resistances, CFs were subjected to oxidation and acidification followed by sol-gel dip-coating to deposit ZrO₂ on their surfaces. ZrO₂-C_f/SiC composites were fabricated by joint hot compression molding and sintering, compared to C_f/SiC and SiC prepared by the same method. Microstructural analyses indicated that ZrO₂ coatings were successfully deposited on CF surfaces, formed strong bonding and interfaces between CF and the matrix. Meanwhile, CFs were found uniformly distributed in SiC matrix with random orientations. Flexural curves of ZrO₂-C_f/SiC and C_f/SiC revealed the presence of “false plasticity” regions after sharp drops, which were quite different from brittle flexural behavior of SiC ceramic. Compression strength of the three samples showed step-up growth. ZrO₂-C_f/SiC exhibited the highest value, indicating the introduction of CFs and ZrO₂ coatings do have great influence on mechanical performances. After heat treatment, ZrO₂-C_f/SiC exhibited better oxidation resistance than C_f/SiC, with weight loss ratios estimated to ??3.76% and ??6.43%, respectively. These improved properties indicated that ZrO₂-C_f/SiC would be excellent alternatives to other existence materials under ultra-high temperature environments.     

阴,阳离子聚合物地层内凝胶化改善水驱效果的研究

研究了一杆阴离子聚合物（Ａｃ５３０）和一种阳离子聚合物（Ｍｂ５８１）在水溶液中形成凝胶的条件和过程、凝胶化学结构、形态、稳定性和力学性能。在模拟地层的二维微观模型内观测了两种聚合物驱替渗流、相逼、形成凝胶、凝胶封堵大孔道的机理。在亲水填砂模型内测定了阴、阳离子聚合物凝胶体系降低渗透率的能力。     

双塔脱丙烷工艺技术

对扬子乙烯装置双塔脱丙烷系统低压塔液泛、高压塔再沸器堵塞等问题进行了技术分析,提出了工艺流程修改方案,完善了双塔脱丙烷技术,对同类装置有参考价值。     

辐照技术在聚丙烯材料制备和改性中的应用

利用辐照的手段,来制备功能化的聚丙烯材料,在获得新功能的同时,不改变聚丙烯原有的优点,并综述了辐照技术在聚丙烯材料制备和改性中的研究及应用情况     

A STUDY ON ACIDITY AND CATALYTIC PROPERTY OF [B] ZSM-5 CATALYST MODIFIED WITH SILICON COMPOUND BY CHEMICAL SURFACE DEPOSITION OF LIQUID-PHASE TECHNIQUE

The boron heteroatom zeolite catalyst has been modified with silicon compound by Chemical Surface Deposition of Liquid-phase (CLD) technique and the catalytic property of the modified catalyst is studied. Meanwhile, the acidity of the modified zeolite catalysts is characterized through TPD and IR technique, and the fluid adsorption method is used to determine its pore structure. The relationship between the catalytic property of the zeolite catalyst and its pore structure, its acidity has been found. The results of toluene-ethylene alkylation reaction indicate that the selectivity of p-ethyltoluene on the modified zeolite catalyst is higher than that on the zeolite catalyst before silanizated, reaching 94.14%.     

贵冶二期闪速炉失重给料螺旋运行实践

本文介绍了贵冶失重给料螺旋的性能、生产准备、点检维修、技术攻关、缺陷改进。     

同步电动机改型设计

对同步电动机从400V改为6000V过程中的几个问题通过实例进行分析说明,可供同步电机的改型设计参考。     

INTERFACE/INTERPHASE ENGINEERING OF POLYMERS FOR ADHESION ENHANCEMENT: PART II. THEORETICAL AND TECHNOLOGICAL ASPECTS OF SURFACE-ENGINEERED INTERPHASE-INTERFACE SYSTEMS FOR ADHESION ENHANCEMENT

Part I of this paper reviewed the theoretical principles of the macromolecular design of polymer interface/interphase systems for obtaining maximum adhesion and fracture performance of adhesively bonded assemblies. In Part II a novel, relatively simple and industry-feasible technology for surface-grafting connector molecules is demonstrated and discussed in detail and supported by a range of experimental examples. It is shown, in agreement with contemporary theory, that the use of chemically attached graft chemicals of controlled spatial geometry and chemical functionality enables a significant increase in the strength and fracture energy of the interphase, to the point of cohesive fracture of the substrate, or that of an adjacent medium such as adhesive, elastomer, or other material. This occurs even after prolonged exposure of investigated systems to adverse environments such as hot water.     

RE／S值对控轧低碳Mn－Nb－RE钢硫化物成分和形貌的影响

用扫描电镜测定了含０．０４１％～０．０７６％ＲＥ的低碳Ｍｎ－Ｎｂ－ＲＥ钢中硫化物的成分、大小和形貌。ＲＥ／Ｓ值为２．８～３．０时，钢中的硫化物充分变质。