Effect of structure on the properties of polyurethanes based on aromatic cardanol-based polyols prepared by thiol-ene coupling

Industrial-grade cardanol and 2-mercaptoethanol were reacted to generate hydroxyl-functionalized cardanol by UV, free-radical-initiated thiol-ene coupling between the double bond moieties of the cardanol long carbon side chain and thiol functional groups. The average hydroxyl number of the hydroxyl-functionalized cardanol was controlled by reaction time, with the hydroxyl values of this ranging within 168–201 mg KOH g⁻¹. This cardanol was then used as a polyol to prepare cardanol-based polyurethane with hexamethylene diisocyanate and a NCO/OH ratio of 1. To compare the effect of cardanol-based polyols with the properties of cardanol-based polyurethane, cardanol modified with 10-undecylenate was used as a raw material to prepare cardanol-based polyols, including the long carbon chain of 10-undecylenate. All properties were examined, and data revealed that cardanol-based polyols including this long carbon chain can improve the hydrophobic and mechanic properties of the cardanol-based polyurethane.     

Photo-vulcanization using thiol-ene chemistry: Film formation,morphology and network characteristics of UV crosslinked rubber latices

The photo-vulcanization with versatile thiol-ene chemistry represents an innovative approach to crosslink diene-rubber materials both in latex and in solid film state. In this work, the structure of elastomer-based thiol-ene networks and the morphology after film formation are studied in detail using electron microscopic techniques, atomic force microscopy and multiple-quantum solid-state NMR spectroscopy. Additionally, film formation properties and corresponding macroscopic properties of photo-vulcanized natural rubber (NR) latex and its synthetic counterpart, isoprene rubber (IR) latex, are determined in dependence on the curing procedure (pre- and post-vulcanization). The results reveal that thiol-ene cured elastomers comprise homogenously distributed crosslinks with a low amount of short chain defects. Whilst photochemically pre-cured NR latex particles provide coherent films, the film formation and mechanical properties of IR are strongly governed by the crosslink density of the latex particles. In film state, photo-vulcanization promotes narrow crosslink distributions and excellent tensile properties of both NR and IR.     

Newly UV-curable polyurethane coatings prepared by multifunctional thiol- and ene-terminated polyurethane aqueous dispersions: Photopolymerization properties

A novel approach toward the preparation of newly UV-curable polyurethane coatings composed of multifunctional thiol- and ene-terminated polyurethane aqueous dispersions is presented. By a synergistic combination of polyurethane dispersions synthesis and thiol-ene chemistry, strategies for the preparation of newly UV-curable polyurethane coatings are developed. Photo-DSC, real-time FTIR, DMA and tensile tests measurements are used to investigate the photopolymerization and mechanical behaviors of newly UV-curable polyurethane coatings. The newly polyurethane coatings have 1.5 times higher polymerization rate and final 99% functional groups conversion in air conditions compared to current urethane-acrylate based UV-curable polyurethane dispersions coatings. UV-cured polyurethane films prepared by this method are also found to exhibit increase in Young's modulus and tensile strength at break by 25% and 10%, respectively. These experiment facts suggest that the incorporation of thiol-ene chemistry to the polyurethane dispersion coatings increase their polymerization rate, producing a high degree of cross-linking. This confirms the preparation of the targeted novel UV-curable polyurethane coatings and reveals the dramatic effect that changes in incorporation of thiol-ene chemistry can have on the photopolymerization behaviors of UV-curable polyurethane dispersions coatings systems.     

Kinetics analysis and physical properties of photocured silicate-based thiol-ene nanocomposites: The effects of vinyl POSS ene on the polymerization kinetics and physical properties of thiol-triallyl ether networks

The kinetics and thermal/physical properties of the trithiol-TAE (triallyl ether) system were measured with respect to increasing polyoligomeric silsesquioxane (POSS) concentrations in order to understand how the presence of POSS nanoparticles affects network formation at low loadings. Vinyl POSS monomer (vPOSS-Bu₄) with both vinyl and carboxylate pendant groups was synthesized via a thermally initiated, free-radical reaction to improve the compatibility of the inorganic particles with the trithiol and triallyl ether comomoners. Chemically modified vPOSS-Bu₄ particles were incorporated into the trithiol-TAE polymer networks by a thiol-ene free-radical photopolymerization at molar concentrations of 0, 1, and 5 ene mol%. The polymerization rates were analyzed using real-time FTIR and photo-DSC. The polymerization rates showed no significant changes with increasing vPOSS-Bu₄ concentration. Thermal analyses of the films by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) demonstrated that thermal stability improves without affecting T _g as the POSS concentration increased. Additionally, scratch resistance increased and flame spread decreased markedly with increasing POSS concentration for concentrations up to 5 mol% vPOSS-Bu₄.     

The nucleophilic, phosphine-catalyzed thiol-ene click reaction and convergent star synthesis with RAFT-prepared homopolymers

The synthesis of 3-arm star polymers from reversible addition-fragmentation chain transfer (RAFT)-prepared precursor homopolymers in combination with thiol-ene click chemistry is described. Homopolymers of n-butyl acrylate and N,N-diethylacrylamide were prepared with 1-cyano-1-methylethyl dithiobenzoate and 2,2′-azobis(2-methylpropionitrile) yielding materials with polydispersity indices (M_w/M_n) ≤ 1.18 and controlled molecular weights as determined by a combination of NMR spectroscopy, size exclusion chromatography (SEC), and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Subsequent one-pot reaction of homopolymer, hexylamine (HexAM), dimethylphenylphosphine (DMPP), and trimethylolpropane triacrylate (TMPTA) results in cleavage of the thiocarbonylthiol end-group (by HexAM) of the homopolymer yielding a macromolecular thiol that undergoes DMPP-initiated thiol-Michael addition to TMPTA yielding 3-arm star polymers. The presence of DMPP is demonstrated to serve an important second role in effectively suppressing the presence of any polymeric disulfide as determined by SEC. Such phosphine-mediated thiol-ene reactions are shown to be extremely rapid, as verified by a combination of FTIR and NMR spectroscopies, with complete consumption of the CC bonds occurring in a matter of min. MALDI-TOF MS and SEC were used to verify the formation of 3-arm stars. A broadening in the molecular weight distribution (M_w/M_n ∼ 1.35) was observed by SEC that was attributed to the presence of residual homopolymer and possibly 2-arm stars formed from trimethylolpropane diacrylate impurity. Interestingly, the MALDI analysis also indicated the presence of 1- and 2-arm species most likely formed from the fragmentation of the parent 3-arm star during analysis. Finally, a control experiment verified that the consumption of CC bonds does not occur via a radical pathway.     

Hybrid organic-inorganic silicate/thiol-ene photocured coatings

Hybrid organic-inorganic photocured systems based on thiol-ene chemistry were prepared by dispersing different silicates, sepiolite fibers and lamellar kaolin, up to a content of 7 wt.% in a thiol-ene system.The addition of the silicate filler in the range of 1-7 wt.% did not significantly influence the photocurable process inducing a slight increase on Tg and E′ values. On the other hand, the addition of the silicate filler resulted in an increase on surface hardness with increasing particle content. We can conclude that the presence of silicates leads to an excellent effect of reinforcement of the surface hardness of the thiol-ene nanostructured coatings.     

Sulfur-containing hyperbranched polymeric photoinitiator end-capped with benzophenone and tertiary amine moieties prepared via simultaneous double thiol-ene click reactions used for UV curing coatings

A series of sulfur-containing hyperbranched polymeric photoinitiators end-capped with benzophenone (BP) and tertiary amine moieties (B/A-HPIs) were synthesized via the simultaneous double thiol-ene click reactions of thiolated hyperbranched polymer with both dimethylaminoethyl acrylate and 3-(4-benzoylphenoxy)propyl acrylate. The molecular structures were characterized by ¹H NMR and FT-IR spectroscopy. From the UV-vis spectra, B/A-HPIs showed the stronger n-π* absorption at ∼340 nm with a higher molar extinction coefficients of 371 L mol⁻¹ cm⁻¹ than 148 L mol⁻¹ cm⁻¹ of BP, and an obvious red shift of π-π* absorption from ∼250 nm of BP to ∼280 nm. According to the photo-DSC study, the photopolymerization rate of 1,6-hexanediol diacrylate initiated by 5 wt% B/A-HPI was twice higher than that by BP. The DMTA results showed the good miscibility of B/A-HPIs with acrylate resins and high crosslinking density of cured films.     

Synthesis of Alkyl Sulfur-Functionalized Oleic Acid-Based Polymethacrylates and Their Application as Viscosity Index Improvers in a Mineral Paraffinic Lube Oil

This work describes the synthesis of alkyl sulfur-functionalized polymethacrylate-based Viscosity Index Improvers (VII) derived from oleic acid (OLA) for mineral paraffinic lubricating oils. In this strategy, OLA was first quantitatively ramified by alkyl thiols containing long aliphatic chains through thiol-ene coupling as demonstrated by ¹H NMR spectroscopy with the complete consumption of OLA internal double bonds. The resulting alkyl sulfur-functionalized OLA-based derivatives were methacrylated through Steglich esterification in order to afford highly suitable hydrophobic OLA-based monomers which, as far as we know, have not been described yet in the current literature. High polymethacrylate molecular weights were reached through radical polymerization despite the long alkyl pendant chains contained in their backbones. Finally, the resulting alkyl sulfur-functionalized OLA-based polymethacrylates have been blended in a mineral paraffinic oil (MPO) of reference at 5 wt% and evaluated as VII. Rheological measurements revealed that polymer thickening powers were significantly improved in oil with temperature and promoted by increasing the pendant alkyl thiol contained in polymer backbones. Moreover, the viscosity index of MPO was significantly improved with the addition of both synthesized homopolymers which confirmed their efficiency as VII. In the meantime, these results have been compared with a previously reported polymer, the poly(2-[methacryloyloxy]ethyl oleate) (PMAEO), which demonstrated a lower VII efficiency compared with its analogous polymethacrylates containing an additional alkyl chain in their pendant chains.     

Facile functionalization of soybean oil by thiol-ene photo-click reaction for the synthesis of polyfunctional acrylate

Nowadays biosource-based materials have received revitalized interest for their ability to substitute for petrochemical-based materials. In this paper, we report a facile synthetic method of soybean oil-based polyfunctional acrylate (PFA) for UV-curable materials. Specifically, rapid and highly efficient side-chain functionalization of soybean oil was achieved via photoclick thiol-ene reaction, soybean oil-based polycarboxylic acid (PCA) was thus obtained. Next, by DCC (N,N′-dicyclohexylcarbodiimide) catalyzed esterification reaction with hydroxypropyl acrylate, polyfunctional acrylate (PFA) was synthesized at room temperature. Real-FTIR result indicated that almost 100% conversion of double-bond within vegetable oil was observed within 16.7 min, yielding the soybean oil-based polycarboxylic acid quantitatively. Furthermore, the structure of PFA was confirmed by ¹H NMR and FTIR. Finally, the excellent UV-curing rate of PFA was revealed by real-FTIR.