Effect of ionic content,solid content,degree of neutralization,and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

There are many variables in the preparation of aqueous polyurethane (PU) dispersions. Carboxylic acid content, solid content, degree of pre/postneutralization of the carboxylic acids, and chain extension all impact dispersion particle size, viscosity, pH, molecular weights, and glass transition temperature. This study evaluated the impact of these variables on a given PU dispersion formulation prepared from isophorone diisocyanate, an aliphatic polyester polyol, dimethylol propionic acid, and hexamethylene diamine with triethyl amine as the neutralizing base and N‐methyl pyrrolidone as the cosolvent. Changes in carboxylic acid content, degree of preneutralization, and chain extension were found to have the expected impacts on dispersions properties. Increased ionic content in the dispersion step led to lower particle size and higher viscosity, increased chain extension with its concurrent increase in molecular improved subsequent film properties. Surprising results were obtained by varying the amount of postneutralization and from increased solids content at the time of dispersion. Unexpectedly, both of these variations led to much higher dispersion viscosities and particle size in solution. To have these changes take place, it is theorized that there is a major change in solution morphology caused by these modifications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2514–2520, 2005     

聚氨酯IPN的研究——制备方法与性能的关系

介绍了聚氨酯 IPN合成技术的主要特征 ,PU预聚体分子量大小、NCO/ OH的比值 ,互穿网络的方式及反应温度、速率对性能的影响     

新型丙烯酸聚氨酯涂料研究

用ＨＤＩ／ＴＤＩ作为交联组分制得的丙烯酸酯型聚氨酯涂料，其综合性能优于用芳香族异氰酸酯预聚体交联的聚氨酯涂料。介绍了制备方法和影响其性能的诸因素。     

PEG型聚氨酯预聚体的研制

为制备浇注型聚氨酯弹性体，首先以聚乙二醇（PEG）和甲苯二异氰酸酯（TDI）为原料，通过测定-NCO的含量，确定预聚反应的时间和温度，合成了聚氨酯预聚体。试验结果显示：TDI/PEG摩尔比1．85～1．90．水分含量控制在0．05％以内，制得的预聚体黏度低，游离聊质量分数低，稳定性良好，由其合成的浇注型聚氨酯弹性体性能优异。     

聚氨酯浇注弹性体的合成研究

采用2种不同的预聚体合成方法制备聚氨酯浇注弹性体,并对其性能进行了测试。结果表明,分步加入扩链剂乙二醇的预聚体合成工艺所得浇注聚氨酯弹性体的拉伸强度比一次性加入乙二醇的预聚体合成工艺所得浇注聚氨酯弹性体的拉伸强度提高了70%左右,而伸长率变化不大。同时研究了这2种制备工艺对材料动态力学性能的影响。并探讨了不同R值及配方中交联剂用量对聚氨酯浇注弹性体力学性能的影响。     

新型聚氨酯防水涂料性能的研究

本以聚醚多元醇和过量多异氰酸酯合成聚氨酯预聚体，以水为固化剂制备一种新型聚氨酯防水涂料，讨论了两种聚醚多元醇(N220／N3050)质量比、NCO质量分数、固化剂含量、甲乙两组分质量比对聚氨酯防水涂料力学性能的影响。     

Studies on blends of natural rubber and ethylene propylene diene rubber modified with phosphorylated cardanol prepolymer: Processability,physico‐mechanical properties,and morphology

The melt processability and physico‐mechanical properties of blends of natural rubber (NR) and ethylene propylene diene rubber (EPDM) containing different dosages (0–10 phr) of phosphorylated cardanol prepolymer (PCP) were studied in unfilled and china‐clay‐filled mixes. The plasticizing effect of PCP in the blends was evidenced by progressive reduction in power consumption of the mixing and activation energy for melt flow with an increase in the dosage of PCP. The PCP‐modified blend vulcanizates showed higher tensile properties and tear strength despite a decrease in the chemical crosslink density (CLD) index. This is presumably due to the formation of a crosslinked network structure of PCP with the rubbers and improved dispersion of the filler particles in the rubber matrix, as evidenced by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Thermogravimetric analysis showed an increase in thermal stability of the blend vulcanizate in presence of 5 phr of PCP. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5123–5130, 2006     

有机硅改性聚氨酯预聚体的制备及表征

以聚己二酸乙二醇酯、甲苯-2．4二异氰酸酯、二元醇、羟基硅油为主要原料,合成有机硅改性聚氨酯密封剂预聚体。用红外光谱法对其结构进行表征,同时测定预聚体的物理性能。结果表明．合成的聚氨酯密封剂预聚体受环境温度、空气湿度影响小,存放时间长,因此提高了密封胶力学性能。     

螺环结构膨胀单体的合成及膨胀性能研究

为解决环氧树脂固化时体积收缩带来的不良影响,用实验室合成的三元醇与二正丁基氧化锡反应制得螺环结构的膨胀单体3,9-二羟甲基-3,9-二(二甲基乙硫基)-1,5,7,11-四氧杂螺环[5,5]十一烷改性环氧树脂.产物经红外、核磁表征其结构.用膨胀剂跟踪测定阳离子引发膨胀单体开环聚合体积膨胀率为3.16%,考察预聚体改性环氧树脂体积膨胀率的变化,为1.194%.     

天然胶/杜仲胶共混硫化物结晶性对热致形变回复性能的影响

用XRD法分析天然胶/杜仲胶共混硫化胶的结晶性,研究其结晶性对天然胶/杜仲胶共混硫化胶的物理性能和热致形变性能的影响.实验结果表明:随着杜仲胶用量的增加,硫化胶在XRD图谱中的衍射峰强度增大,硫化胶的结晶性增大,硫化胶交联密度有明显减小.定伸应力和拉伸强度随杜仲胶用量的增加而增大,而拉断伸长率减小,热致回复温度降低,试样的最终形变率减小.