Calcium phosphates grown on bacterial cellulose template

Bacterial cellulose membranes were employed as templates for calcium phosphates deposition by successive immersion in solutions of Ca(NO₃)₂·4H₂O and (NH₄)₂HPO₄, under ultrasonication. During the wet chemical reaction, mineral phases were loaded on bacterial cellulose fibrils, leading to precursor hybrid composites. These were subjected to a lyophilisation procedure in order to preserve the 3D porous aspect and afterwards to a thermal treatment with the aim of removing the polymeric phase and generating well crystallized structures. Different types of morphologies were achieved by varying the heating rate, as well as the calcination temperature and period. The as-prepared samples and the final ones were investigated from compositional and structural point of view through X-ray diffraction and Fourier-transform infrared spectroscopy and morphologically concerning by scanning electron microscopy. The magnetic properties were also evaluated in order to demonstrate the suitability of the obtained materials for the development of magnetic scaffolds dedicated to hard tissue applications.     

A simplified expression for the hard-sphere dimer fluid radial distribution function

Recently, in our laboratory a closed form expression for the correlation function of the hard-sphere dimer fluid obtained from Wertheims multidensity Ornstein-Zernike integral equation theory with Percus-Yevick approximation was presented by Kim et al. [2001]. However, it is difficult to apply its expression to perturbation theory and vapor-liquid equilibria calculations, since it is of very complex form. In this work, we present a simplified expression for the first shell of the radial distribution function (RDF) of the hard-sphere dimer fluid using a series expansion of the analytical expression. The expansion is carried out in terms of both the packing fraction and the radial distance. Expressions are also obtained for the coordination number and its first and second derivatives as functions of radial distance and packing fraction. These expressions, which are useful in perturbation theory, are simpler to use than those obtained from the starting equation, while giving good agreement with the original expression results. Then we present an simplified equation of state for the square-well dimer fluid of variable well width (λ) based on Barker-Henderson perturbation theory using its expression for the radial distribution function of the hard-sphere dimer fluid, and test its expression with NVT and Gibbs ensemble Monte Carlo simulation data [Kim et al., 2001].     

Numerical simulation of slider dynamics during slider–disk contact

In this paper, the dynamic behavior of pico slider in contact with the disk was calculated. The analysis model consists of a simplified suspension model, an air bearing model, and a slider–disk contact model. The contact model consists of two elements. One is surface roughness model measured by Atomic Force Microscope (AFM) and the other is micro-waviness model. The dynamic behaviors of the tri-pad slider are calculated at several rotation speeds to investigate slider vibration modes during slider–disk contact. The slider oscillation frequency depends on the rotation speed and it saturates about twice as much as eigen frequency of air bearing pitch mode.     

原木板材的窑式干燥

本文综述了canterbury大学近年来关于新西兰木材窑式干燥的研究。有些硬木单纯窑式干燥是困难的,但利用太阳能窑式风干则有可能;轮回操作可以减小干燥应力从而减小产品性能的退化程度。种植生产为主的软木干燥较容易,从经济考虑应采用高温干燥,以减少干燥时间。高温操作时对流传递显得相当重要。实验表明,当空气流过板面时,不同点处的传质系数有显著差异。湿分在木板中移动的模型可假定为:随着干燥进行蒸发面向中心退缩。但心材和边材的行为有所不同:边材中的水份可在相邻脉管间迁移,但在心材中则不可能。正是这种差异导致干燥时间和干燥温度曲线不同。     

全国计算机等级考试上机考试的实践与思考

从系统管理员的角度出发,对全国计算机等级考试上机考试进行探讨和分析。提出一套上机考试系统环境的配置方法,对考试中出现的常见问题进行分析、提供对策。     

不同防毒技术在计算机实验室的比较研究

详细介绍杀毒软件技术和还原保护技术的特点及发展现状．从投入成本、软件系统资源占用率、功能稳定性、数据恢复效率和部署简易性等方面,对两类技术在计算机实验室内应用的适应性展开比较研究,得出还原保护技术更适合在实验室内得到大规模应用这一结论,指出它在病毒防护工作中的不足和仍需补充研究的方向。     

基于AES算法的磁盘加密设计与实现

设计了一种纯软件的磁盘加密系统,系统利用Windows驱动开发技术,采用AES（高级加密标准：Advanced EncryptionStandard）算法作为磁盘加密算法,在不需要添加额外硬件设备的情况下,实现对磁盘内部数据加密和解密,有效地保护了磁盘的敏感信息。     

生产过程中的小波阈值信号去噪方法

在工业生产过程中,由于设备所收集到的混合信号中包含大量的背景噪声信号,而这些背景噪声信号会影响到异响有用信号的提取。因此,为对收集的信号进行消噪,提出了小波阈值去噪中估计小波系数的软阈值和硬阈值方法,结合硬阈值和软阈值方法各自的特点,采用了几种改进的方案,分别是多项式插值法,软、硬阈值折衷法和模平方处理方法。最后给出了数值试验,结果说明,改进的小波阈值方法都得到了较好的去噪效果,为工业生产过程优化信号提取提供了依据。     

计算机硬盘坏磁道修复的思路与技巧

本文通过隐藏坏磁道分区的方法,着重介绍了硬盘坏磁道的修复技术及注意事项,同时还介绍了逻辑坏磁道、0磁道损坏的修复方法。