四川某稀土矿选矿试验研究

针对四川某稀土矿选矿工艺存在的稀土回收率低的问题，开展了一系列选矿试验研究。试验结果表明，在矿浆质量浓度为30%，粗选NaOH用量为600g/t，水玻璃用量为3000g/t，EF1106用量为3500g/t，起泡剂用量为60g/t情况下，采用一粗、三精、两扫、中矿按顺序返回的选矿流程，可获得稀土REO的品位和回收率分别为66.32%和79.88%的稀土浮选精矿。与该选厂的生产指标相比，稀土回收率提高了13.93%。     

Preparation of clean coal by flotation following ultra fine liberation

This paper reports the results of current fundamental research at the Department of Process Engineering, University of Miskolc on the processing of clean coal from Mecsek bituminous coal, Southern Hungary. The theoretical possibility of the separation of different petrographic components was proven experimentally and their liberation degree was determined based on the petrographic composition, flotation kinetic study of isolated components (groups of components), scanning electron microscopy and microprobe analyses. The mill with stirred ball media was chosen for the ultra-fine liberation of the coal components. It was revealed that along with the liberation of coal components, their surface oxidation and spontaneous agglomeration, entrapping the mineral impurities take place in ultra-fine grinding. This paper discusses the interfacial phenomena occurring in the ultra-fine grinding process and their influence on the flotation. The concept for the advanced preparation of clean coal was developed, tested and proved. The main steps of this concept are the ultra-fine liberation in the stirred-media mill, the de-agglomeration of flocs spontaneously formed during the ultra-fine grinding and the induced (hydrophobic) flocculation with the following two-step flotation in a flotation column.     

浮选柱处理滇池污水的工艺初探

针对滇池水污染的状况和治理现状，对目前国内采用ICEAS工艺的污水处理厂脱氮除磷效果不佳的现状，此工艺采用浮选柱作为浮选设备，并采用充以臭氧等新的技术，能更有效地解决滇池污水中的氮、磷、有机悬浮物、COD污染物，预计会有很好的研究价值和应用前景。     

Modeling flotation separation in a semi-batch process

A model for a semi-batch flotation separation process has been developed, based on available microprocess probabilities, and compared to experimental data obtained using a WEMCO laboratory flotation cell. In general, the model predicts the correct experimental trends. In many cases, the model also predicts removal efficiency very well. Parametric studies reveal that the model predictions are sensitive to a stability parameter, the turbulent energy density in the flotation cell, the contact angle between the solid particle and fluid, and the ratio of initial-to-critical film thickness.     

黑钨矿细泥浮选时有机螯合剂的活化作用

黑钨矿细泥的有效浮选仍是有待解决的选矿难题。本文试图采用有机螯合剂作活化剂，以实现黑钨细泥浮选药剂低耗高效的目的。     

黄沙坪矿浮选程控自动给药机的原理及应用

介绍了湖南黄沙坪铅锌矿浮选程控自动给药机的工作原理、系统配置及功能。现场使用表明，浮选程控自动给药机比人工加药降低药剂耗量9－10个百分点。     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

Study of the effect of ultrasonic treatment on the surface composition and the flotation performance of high-sulfur coal

This paper highlighted the use of X-ray diffraction, scanning electron microscopy and X-ray fluorescence spectroscopy to investigate the changes on the surface composition of high-sulfur coal and pyrite before and after ultrasonic conditioning. The results showed that ultrasonic conditioning resulted in a decrease in the contents of iron and sulfur in coal, an increase in the content of element carbon, and an increase in the purity of the coal. Conversely, ultrasonic conditioning led to an increase in the content of iron and sulfur in pyrite, a decrease in the impure content of calcium, and a relative increase in the purity of the pyrite after ultrasonic conditioning. This study verified that on the one hand, ultrasonic conditioning can promote the pyrite separation from the high-sulfur coal, with the separated pyrite taking the form of FeS; on the other hand, it can produce a cleaning effect on the surface of coal and pyrite with the consequent increase both in hydrophobicity of coal and hydrophilicity of pyrite. The paper introduced ultrasonic pre-treatment of the slurry and stepped froth removal tests of high-sulfur coal and the study on the yield, ash and sulfur content of clean coal in different phases. The results gave further evidence of the increases both in the rate and the selectivity of flotation. This study shows that ultrasonic conditioning can enhance the performance of de-sulphurization of high-sulfur coal flotation.     

Electrochemical pre-treatment of effluents containing chlorinated compounds using an adsorbent

Electrochemical pre-treatment of industrial wastewater to remove refractory and/or toxic organic components, making them more amenable to biological treatment, is likely to be more cost-effective than using a physical or chemical process for complete organic removal. This paper demonstrates the use of a carbon-based adsorbent material that preferentially removes chlorinated organic compounds. Electrochemical regeneration of the adsorbent is shown to be a quick, easy and cheap process, because the adsorbent is both highly electrically conducting and non-porous. High regeneration rates over a number of cycles were obtained by passing a charge of 25 C g⁻¹ through a bed of adsorbent particles, at a current density of 20 mA cm⁻² for 10 min. The energy required to remove a kg of COD from an industrial wastewater was calculated to be 27 kWh.     

复合捕收剂浮选金红石的研究

通过浮选试验以及吸附量、表面张力等的测定,研究了复合捕收剂对金红石的捕收性能。添加剂F能大大降低捕收剂B的用量,并与捕收剂B产生缔合作用吸附在矿物表面。