Cheese fortification using saturated monoglyceride self‐assembly structures as carrier of omega‐3 fatty acids

The purpose of this research was to study the capacity of emulsions containing saturated monoglyceride self‐assembly structures to deliver omega‐3 fatty acids in fresh soft cheese. To this aim, fortified emulsions containing different ratios of milk, saturated monoglycerides (MGs) and cod liver oil were added to milk before cheese‐making. These emulsions were characterised by distinct microstructural features observed by polarised light microscopy and apparent viscosity values. The omega‐3 delivery performance of MG emulsions highlighted that this strategy allowed a good retention of the omega‐3‐rich oil in the curd (up to 75%). The fortified cheeses showed yield value and fat content higher than those of control samples. The enriched cheese showed hardness and cohesiveness obtained by texture profile analysis similar to those of the unfortified product. Only a slight decrease in gumminess was detected in fortified cheese.     

Correlation between instrumental texture and colour quality attributes with sensory analysis of selected cheeses as affected by fat contents

This study evaluated several physical and sensory parameters of different types of cheese available in the Polish market. The measurements of textural properties were conducted in an Instron universal testing machine, while the colour properties of cheeses were measured using a Minolta chromameter. The chemical composition was determined by means of the near‐infrared spectroscopy (NIRs). Moreover, a trained sensory panel was invited to assess the cheese texture‐related properties. Generally, cheeses with reduced fat content were characterised by higher hardness, adhesiveness, cohesiveness and elasticity. Texture‐related parameters of cheese with canola oil were comparable to that of most of full‐fat cheeses. The correlation analysis between physical and sensory attributes related to cheese textural properties indicated the potential applications of TPA, shear and penetration tests (r = 0.766, r = 0.75 and r = 0.765, respectively) for the evaluation of sensory properties related to the hardness. Meanwhile, the elasticity of cheese obtained from sensory evaluation was strongly correlated with the elasticity determined from the shear test (r = 0.722) and moderately correlated with the elasticity from penetration test (r = 0.588), indicating a need to refine the method of penetration test. In addition, cheeses exhibited higher meltability during convection heating at 230 °C than microwave heating. The values of meltability for cheese with reduced fat content were lower than those of full‐fat cheese.     

Effect of fortification with asparagus powder on the qualitative properties of processed cheese

The qualitative properties of processed cheese (PC) fortified with different levels of asparagus powder (AP) (0.5%, 1% and 1.5% wt/wt) were evaluated during storage. AP decreased the pH and lipolysis indexes and increased the phenolic content, antioxidant activity and proteolysis of the processed cheeses. AP made the structure of the cheese more elastic, increased the rigidity and decreased the spreadability compared with the control sample, which corresponded to the results obtained using dynamic oscillatory rheometry. The results showed that AP as a rich source of bioactive components could be used for the fortification of processed cheeses.     

Acceptability of genetically modified cheese presented as real product alternative

European consumers, in general, have negative attitudes towards the use of gene technology in food production. The objective of this study was to examine whether taste and health benefits influence the acceptability of genetically modified (gm) products when they are presented as real product alternatives. Consumers in Denmark, Finland, Norway and Sweden (n=738) assessed two cheeses: one was labelled as genetically modified (preferred in an earlier product test) and the other as conventional (neutral in an earlier product test). A smaller control group received two cheeses with blind codes. Labelling decreased consumers' intentions to buy the originally preferred gm-labelled cheese, but still the intentions were at the same level with the conventionally labelled option. Participants chose two gm cheeses out of five possible when given the option to take cheese home after tasting. Intentions to buy gm cheese could best be explained by respondents' attitudes towards gene technology and perceived taste benefits. General health interest was also a reinforcer of intentions for gm cheese with reduced fat content.     

High-pressure-induced changes in bovine milk: a review

High-pressure (HP) treatment of food products is a novel processing technique during which the product is treated in a vessel of suitable strength at a high pressure, generally in the range 100–1000 MPa. As a result, several constituents and properties of the treated product are altered. HP-induced changes in the constituents and properties of milk are arguably among the most extensive of the range of food products studied to date. HP treatment of milk induces solubilization of minerals associated with the casein micelles, denatures whey proteins and, depending on pressure, can either induce aggregation or disruption of the casein micelles. These HP-induced changes in milk constituents affect the properties of the milk; cheesemaking properties of milk can be enhanced considerably, indicating potential application of HP treatment in this area; furthermore, encouraging results have also been reported for HP treatment of milk prior to yogurt manufacture. HP treatment of milk also affects its microflora; however, considerable variation in baroresistance between bacterial species and strains exists. Further applied research appears warranted to establish the full commercial potential of HP treatment of milk.     

Physicochemical differences between Croatian cheese matured in a lamb skin sack (Sir iz misine) and cheese matured in a rind throughout ripening

The aim of this study was to research differences in physicochemical parameters between Croatian cheese in a lamb skin sack (Sir iz misine) and cheese in a rind throughout ripening. Cheese in a sack had significantly (P < 0.05) lower content of total solids, fat, proteins and salt which showed the ‘protective’ effect of skin sack and higher permeability of natural rind. The water‐soluble nitrogen in the total nitrogen (%TN) and 12% trichloroacetic acid‐soluble nitrogen (%TN) at the end of ripening was significantly (P < 0.05) higher in cheese in a sack than in cheese in a rind which indicates intensive proteolysis in cheese in a sack.     

Polyphosphates as inhibitors of surface mould growth on hard cheese during ripening

A novel treatment using polyphosphates to protect cheeses against superficial mould growth was assayed. The treatments were: control commercial paint with natamycin (I), commercial paint based on polyvinyl–water (II), immersion in a saturated solution of polyphosphate (III), immersion and commercial paint (IV), commercial paint of polyphosphate solutions (V) and immersion and commercial paint of a saturated solution of polyphosphates (VI). The cheeses were ripened for 6 months. Superficial mould growth was inhibited in groups IV and VI when compared to cheeses from the control group (I). Statistical sensory analysis made between cheeses from groups IV and I (control) showed no significant differences.     

A generalised model for cheese mass loss determination during ripening

A generalised mechanistic model describing cheese mass loss during ripening in controlled conditions is proposed. It is based on two main processes occurring in the cheese rind: respiratory activity of the microbial consortia and water evaporation. The generalisation is based on (i) two different cheesemaking methods and cheese sizes (Camembert, a soft cheese and Saint-Nectaire, a pressed non-cooked cheese), (ii) several trials performed at ranging controlled ripening temperatures (7-16 °C) and relative humidities (88-98%) and (iii) different ripening room sizes and air flow patterns. Some hypothesis underlying this generalisation are discussed. The model fits the experimental data accurately: the absolute mean error is lower than 11% of the experimental cheese mass loss. The two main factors governing the water transfer rate are the ripening room relative humidity and the cheese surface water activity. Their impact on the model accuracy is about 40% and 20%, respectively.     

Antibacterial effects of chitosan coating containing Mentha aquatica L. essence against Escherichia coli,Staphylococcus aureus and Listeria monocytogenes in Iranian white cheese

The effect of a chitosan coating and Mentha aquatica L. essence on Iranian white cheese was investigated. Results showed 100% inhibition of Escherichia coli growth using 1.5% essence after 10 days. After 15 days of incubation, the Staphylococcus aureus population was reduced by 44.2%, 70.0%, and 88.5% using 0.5, 1.0 and 1.5% essence, respectively. After 15 days, Listeria monocytogenes growth was inhibited by 63.84%, 70.12%, and 85.9% using 0.5, 1.0, and 1.5% essence, respectively. Inhibition zone diameter studies also confirmed the antibacterial effects of applied coating against all the above‐mentioned bacteria in Iranian white cheese.     

Computed tomographic evaluation of gas hole formation and structural quality in Gouda‐type cheese

Computed tomography (CT) was performed on Gouda‐type cheese during ripening to evaluate gas hole formation and structural quality. The cheese was exposed to different ripening conditions, including variations in ripening temperature and concentration of butyric acid bacteria. Computed tomography images were obtained every 2 weeks for 16 weeks to assess the volume, shape and location of gas holes. The results demonstrate that CT makes the nondestructive monitoring of cheese gas hole formation and evaluation of the structural features of cheese possible throughout the ripening period.