齐大山铁矿南帮含水构造带探测研究

为解决采空区突发涌水给矿山安全生产带来的安全威胁,以齐大山铁矿为研究对象,以高密度电阻率法含水构造带理论模型的正演模拟研究为基础,运用高密度电阻率法对采场南帮含水构造带的异常范围进行了圈定;运用瞬变电磁法进行了二次探测,并对高密度电阻率法所圈定的异常范围进行了验证。研究表明:含水构造带显示为低阻异常特征,在高密度电阻率法探测成果图中显示的两处低阻异常与含水构造带理论模型的正演模拟结果一致;同时,在瞬变电磁法探测成果图中显示的低阻区域均在高密度电阻率法所圈定的低阻异常范围内,二者相互验证,这两处低阻异常均为含水构造带的地球物理异常特征的显示,表明采用高密度电阻率法和瞬变电磁法组合识别技术可实现对隐伏含水构造带的先导性探测。     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

数字签名技术在解决密钥泄露方面的发展

密钥泄露对数字签名的危害越来越成为人们关注的焦点，该问题很难找到完全彻底的解决办法，只能尽可能减少其危害。对此专家和学者提出了很多新的数字签名机制，这里详细介绍了其中的一些，并指出它们各自的优缺点。针对在SiBIR数字签名机制中由于网络拥塞或攻击者的恶意拦截使得更新信息丢失造成signer和home base不能保持同步的问题，我们提出了超时同步机制。     

手工水饺定量给馅机的设计

手工水饺定量给馅机解决了包制手工水饺的定量给馅问题，保持每个水饺的重量一致稳定。该机采用柱塞泵给馅，气动传动，自动化，高效率，适合工业化生产手工水饺使用。     

A two-stage algorithm for identification of nonlinear dynamic systems

This paper investigates the two-stage stepwise identification for a class of nonlinear dynamic systems that can be described by linear-in-the-parameters models, and the model has to be built from a very large pool of basis functions or model terms. The main objective is to improve the compactness of the model that is obtained by the forward stepwise methods, while retaining the computational efficiency. The proposed algorithm first generates an initial model using a forward stepwise procedure. The significance of each selected term is then reviewed at the second stage and all insignificant ones are replaced, resulting in an optimised compact model with significantly improved performance. The main contribution of this paper is that these two stages are performed within a well-defined regression context, leading to significantly reduced computational complexity. The efficiency of the algorithm is confirmed by the computational complexity analysis, and its effectiveness is demonstrated by the simulation results.     

波动方程正演模型及应用

本采用声波方程，通过四阶有限差分近似，实现了复杂地质构造零炮距的数值模拟。中同时展示实际应用效果。     

Design improvements on rotary valve particle feeders used for obtaining suspended airflows

The back repulsion of low density particles, sticking of particles in feeder valve and interlocking and cohesive archs of particles in feeder hopper have been widely observed problems of a conventional rotary valve feeder used for feeding of granular particles into an airflow line. In this study, these problems of the rotary valve feeders were isolated by means of novel modifications to its conventional design. Results of the modifications showed that the modified feeder can be sensitively used to feed granular particles with mass feeding rates ranging between 5±0.15 and 85±0.85 g/s without encountering problems experienced with conventional rotary valves.     

RFCC吸收稳定系统改造

吉林油田炼油厂RFCC装置吸收稳定系统的干气中C3以上组分含量较高，损失大量的液化气，通过改造解吸塔的进料方式，吸效降低了解吸塔的温度，降低了干气中C3以上组分的含量，提高了液化气的收率，每年可增加经济效益280多万元。     

A stability classification method and its application to pipelined solution of linear recurrences

A new method of classification for numerical stability of parallel algorithms is proposed based on the theoretical foundation of forward error analysis. It partitions the algorithms according to their asymptotic stability—a measure introduced to relate the limiting behavior of the stability to the size of the problem. Using this method, the stability aspect of the pipelined solution technique for first-order and second-order linear recurrences—the core of a tridiagonal linear equation solver—is studied. In particular, it shows that the pipelined solution method of the first-order linear recurrences has the same degree of stability as the commonly used sequential evaluation algorithms. The stability problems of sequential and pipelined solution methods of the second-order linear recurrences are also studied.     

Ray-cast volume rendering accelerated by incremental trilinear interpolation and cell templates

Two related ideas for improving the speed of ray-cast volume rendering are studied in this paper. The first is an incremental algorithm for trilinear interpolation, a method commonly used in ray-cast volume rendering to calculate sample values. The incremental algorithm can expedite trilinear interpolation when many samples along a ray are located in one cell. The second is an efficient hybrid volume rendering restricted to parallel projection. In the preprocessing stage, acell template is created to store the information used by the incremental trilinear interpolation. When a cell is parallel projected, the information is retrieved from the template to compute the cell contribution. Because the algorithm with only one template may cause aliasing, an antialiasing technique exploiting multiple cell templates is proposed. With our method, ray-cast volume rendering can be accelerated considerably.