Monoacylglycerols derived from butter oil by Penicillium roquefortii in suspension cultures

Structural isomers of monoacylglycerols (monoglycerides, MAGs) were identified and compared after degradation of butter oil by two strains of Penicillium roquefortii and a commercial lipase from P roquefortii (EC 3.1.1.3) at pH 7.0 and 10 °C. The conditions were selected as they were comparable with those used in the manufacture of blue mould‐ripened cheese. The commercial lipase was selected to compare with the fungal strains in terms of acyl migration. Results showed that the main isomers formed by lipolysis with the commercial lipase were sn‐2 MAGs (64 mol%), whilst spores and emerging mycelia of P roquefortii produced mainly sn‐1(3) MAGs (83–90 mol%). The work reported here may lead to further assessment of different MAG structural isomers as natural preservatives in foods and dairy products. © 2002 Society of Chemical Industry     

Microstructures formed by spray freezing of food fats

The spray-freezing of two food fats, tripalmitin (PPP) and cocoa butter (CB) and mixtures thereof, has been modeled experimentally using a novel single droplet freezing apparatus configured so that temperature profiles or samples for microstructure analysis can be obtained. For 2 mm diameter droplets suspended in a cold air flow at temperatures around 2–15°C, initial cooling rates were on the order of 10 K s⁻¹ and the temperature profiles could be correlated directly to DSC data collected at 20 K min⁻¹, indicating that minimal supercooling of the materials occurred in the droplet form. Microstructure analysis confirmed that PPP crystallized preferentially in mixtures, and that the surface structure was very sensitive to storage conditions. The bulk structure was much less sensitive, and the internal microstructure of the PPP droplets revealed distinct nucleation sites, which were absent from the CB: These persisted in the mixtures up to 50 wt%. X-ray analysis indicated that the fats crystallized in their more stable forms, namely, β for PPP and Form V/V1 in CB.     

Measurement of solid fat content by ultrasonic reflectance in model systems and chocolate

A series of confectionery coating fat (CCF) and cocoa butter (CB) dispersions in corn oil were prepared and tempered to a range of temperatures (10, 12 and 15 °C and 26, 27.5 and 29 °C respectively) to produce samples with solid fat contents (SFC) between 0 and 9%. The ultrasonic velocity in the CCF samples increased with increasing SFC and decreased with temperature, however the CB samples were too attenuating to allow velocity measurements. The ultrasonic reflectance at the surface of both sets of dispersions decreased linearly with SFC but at the same level of solids was less for CB than CCF suggesting some dependence on other aspects of fat structure. The microstructures and thermal properties of the fat systems are compared in an attempt to understand these structural differences. Finally ultrasonic reflectance is shown to respond to changes in a chocolate melt during tempering.     

Characterization of edible oils,butters and margarines by Fourier transform infrared spectroscopy with attenuated total reflectance

The combination of attenuated total reflectance (ATR) and mid-infrared spectroscopy (MIRS) with statistical multidimensional techniques made it possible to extract relevant information from MIR spectra of lipid-rich food products. Wavenumber assignments for typical functional groups in fatty acids were made for standard fatty acids: Absorption bands around 1745 cm⁻¹, 2853 cm⁻¹, 2954 cm⁻¹, 3005 cm⁻¹, 966 cm⁻¹, 3450 cm⁻¹ and 1640 cm⁻¹ are due to absorption of the carbonyl group, C−H stretch, =CH double bonds of lipids and O−H of lipids, respectively. In lipid-rich food products, some bands are modified. Water strongly absorbs in the region of 3600–3000 cm⁻¹ and at 1650 cm⁻¹ in butters and margarines, allowing one to rapidly differentiate the foods as function of their water content. Principal component analysis was used to emphasize the differences between spectra and to rapidly classify 27 commercial samples of oils, butters and margarines. As the MIR spectra contain information about carbonyl groups and double bonds, the foods were classified with ATR-MIR, in agreement with their degree of esterification and their degree of unsaturation as determined from gas-liquid chromatography analysis. However, it was difficult to differentiate the studied food products in terms of their average chainlength.     

Milk fat fractionation today: A review

Although anhydrous milk fat (AMF) has excellent properties, its variable physicochemical properties and its lack of functionality restrict its uses in the food industry. A technology involving dry fractionation of AMF has been developed, and its attributes include selectivity, reliability and general application. Combining two simple and reliable technologies,i.e., multi-step fractionation and blending, it is possible to overcome functionality problems and the seasonal variations of AMF. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists’ Society in Toronto, May 10, 1992.     

Volatile compounds of original African black and white shea butter from Tchad and Cameroon

Shea butter is used as an edible vegetable fat in many African countries. It can be utilized as a substitute or complete replacement for cocoa butter in various applications and plays an important role in traditional African medicinal practice. Although detection of volatile compounds by solid‐phase micro‐extraction gas‐chromatography mass‐spectroscopy (SPME‐GC‐MS) is a very reliable and reproducible technique, which can be used as an important part of authenticity checking, production monitoring and contamination detection, no published data about volatile compounds of shea butter are available so far. In this investigation, the characteristic volatiles in the headspace of original African shea butter samples were identified by using SPME‐capillary‐GC coupled to a mass selective detector. Almost 100 different volatile components were identified, e.g. fatty acids, saturated and unsaturated aldehydes and ketones, terpenes, and typical Maillard reaction products such as methylfuranes and pyrazines. Furthermore, the samples have been olfactorily evaluated by a panel of professional flavorists and trained analytical chemists. It can be stated that variations in processing conditions of shea butter result in considerable differences in the composition of headspace volatiles, detected by SPME‐GC‐MS and human olfaction.     

The effect of supercooling on crystallization of cocoa butter-vegetable oil blends

The solid fat content (SFC), Avrami index (n), crystallization rate (z), fractal dimension (D), and the pre-exponential term [log(γ)] were determined in blends of cocoa butter (CB) with canola oil or soybean oil crystallized at temperatures (T _Cr) between 9.5 and 13.5°C. The relationship of these parameters with the elasticity (G′) and yield stress (σ^*) values of the crystallized blends was investigated, considering the equilibrium melting temperature (T _M ^o) and the supercooling (i.e., T _Cr ^o−T _M ^o) present in the blends. In general, supercooling was higher in the CB/soybean oil blend [T _M ^o=65.8°C (±3.0°C)] than in the CB/canola oil blend [T _M ^o=33.7°C (±4.9°C)]. Therefore, under similar T _Cr values, higher SFC and z values (P<0.05) were obtained with the CB/soybean oil blend. However, independent of T _Cr TAG followed a spherulitic crystal growth mechanism in both blends. Supercooling calculated with melting temperatures from DSC thermograms explained the SFC and z behavior just within each blend. However, supercooling calculated with T _M ^o explained both the SFC and z behavior within each blend and between the blends. Thus, independent of the blend used, SFC described the behavior of G′_eq and σ^* and pointed out the presence of two supercooling regions. In the lower supercooling region, G′_eq and σ^* decreased as SFC increased between 20 and 23%. In this region, the crystal network structures were formed by a mixture of small β′ crystals and large β crystals. In contrast, in the higher supercooling region (24 to 27% SFC), G′_eq and σ^* had a direct relationship with SFC, and the crystal network structure was formed mainly by small β′ crystals. However, we could not find a particular relationship that described the overall behavior of G′_eq and σ^* as a function of D and independent of the system investigated.     

Fat Bloom Caused by Partial De-Oiling on Chocolate Surfaces after High-Temperature Exposure

Fat bloom in chocolate is a substantial problem that affects its sensory properties, such as texture and appearance. This phenomenon is because of diffuse light reflection on a roughened surface of chocolate, caused by structural changes of fat crystals subjected to various temperature conditions. The purpose of this study is to characterize the fat bloom formed through gradual two-step cooling after exposure to temperatures (35–37 °C) slightly above the cocoa butter Form βV melting point (33.8 °C). To clarify the fat bloom formation process, the structural changes in cocoa butter and on the chocolate surface, at the dynamic thermal condition for bloom formation, was investigated using X-ray diffraction (XRD), fluorescence light microscopy, and scanning electron microscopy (SEM). The results revealed that an entirely light brown fat bloom occurred, even in the absence of the Form βVI or other polymorphic transformation. Microscopic observation showed that the light brown appearance was because of the porous structure on the chocolate surface. This porous structure was formed by liquid oil moving inside of chocolate from the surface. The formation of a coarse network and the subsequent de-oiling, because of movement of unsolidified liquid fat into the chocolate, appeared to be the main causes of bloom formation. Therefore, a coarsened fat network and oil movement besides the conventional principles of polymorphic transformation of cocoa butter should be considered.     

花生酱的营养及新型花生酱的研究进展

随着人们生活质量的提高,人们对于食物营养的要求也越来越高。由于花生酱的脂肪含量极高,不适于糖尿病、高血压等疾病的患者和老人食用,因此研发低脂、健康、营养的新型花生酱很重要。通过对花生酱制作工艺的调整,降低油脂含量以及补充或添加健康辅料,能显著改善花生酱的营养价值,这也成为花生酱营养改进的重要方向之一。本文对花生酱中脂肪、蛋白质等营养成分及新型花生酱的研究进展进行综述。未来新型花生酱的研发重点可能是通过原料筛选、增加添加剂、改善制作工艺等来调节肠道菌群平衡、增加其益生作用等方面。